Resin Hardner In Eye

Status
Not open for further replies.
Jico

Jico

Well-Known Member
Hello 405th:) I had a little accident today:p I was mixing up some rondo for my noble six helmet. I was just to add the resin hardner when it splashed into the cup and a big amount got in my eye:

dscn0865q.jpg




My camera is not that great, but if you can see that my left eye is very red. I had to go see a doctor :p



SO WEAR EYE PROTECTION AT ALL TIMES WHEN YOU WORK WITH RESIN OR ANY OTHER DANGEROUS MATEREAL.



btw my eye is fine now :) I had to flush my eye with some strange waterXD



Thank for your time^_^



pictures of helmet soon;)
 
It hurts getting resin in your eyes :) I remember when the resin splashed and got in my eyes :( Burnt my Cornea, not very fun :D Glad your ok
 
I don't think that the safety hazards of working with polyester resins and their catalysts can be overstated. The hardener, or catalyst, is Methyl Ethyl ketone Peroxide. This stuff is nasty. It is toxic and a skin and eye irritant. Gloves and eye protection should be worn whenever handling this stuff. Don't mess around with your health and safety. The first thing you should do if you get something like this in your eyes is to flush with running water for 15 minutes. That strange water you used was probably a saline solution, BTW.
 
I am pretty sure that it mentions in the tutorials when working with this stuff to wear eye protection. You are working with some pretty nasty chemicals so you should ALWAYS be wearing eye protection when working with this. Even when you are on the sanding stage...........wear eye protection!! If a good wind gust comes along, that dust can blow into your eyes. Really, it should sort of be common sense to wear eye protection when using this stuff. :p
 
UNSC_Leatherneck said:
The first thing you should do if you get something like this in your eyes is to flush with running water for 15 minutes. That strange water you used was probably a saline solution, BTW.
Click to expand...



I flushed my eye for like 30minsXD Now I never use this stuff without eye protection!:) Thanks guys for all the compassion^^
 
Last edited by a moderator:
When I read the title of the topic I almost freaked!! I'm so glad to know you're okay!



You can never be too careful!
 
A couple years back I was mixing some paint to spray a car and got a "healthy" amount of paint thinner in my eyes and thought they were literally going to burn out of my head,(not fun)! Glad to hear you are ok, I feel your pain! :eek :eek :D
 
Omg Very lucky that nothing happened.

Last Year, I got wrong resin (i mean it was a special resin i found in a shop for Model building)

my hand burned and bubbles was coming out.
 
Adam said:
WEAR GOGGLES AND A MASK. ALWAYS.
Click to expand...

Yes, I second and third and fourth that motion! Sucks that you have to learn the hard way before you do what you know is already right?!
 
Last edited by a moderator:
Status
Not open for further replies.

Similar threads

GregorHawthorne
Back in the saddle
Replies
17
Views
250
Slayer241489
Slayer241489
Captain Glasses
My First Spartan Build (Work in Progress)
Replies
6
Views
535
Captain Glasses
Captain Glasses
Sh0rtfuze
New Recruit, just learned about 405th while in cosplay at Dragoncon
Replies
7
Views
371
Asgardianhammer
Asgardianhammer
ThreeEvening158
Work in Progress: 3D printed Reach armor
Replies
11
Views
1,320
ThreeEvening158
ThreeEvening158
LadyTano
LED strips in a Cortana suit?
Replies
6
Views
763
LadyTano
LadyTano

Similar threads

GregorHawthorne
Back in the saddle
Replies
17
Views
250
Slayer241489
Slayer241489
Captain Glasses
My First Spartan Build (Work in Progress)
Replies
6
Views
535
Captain Glasses
Captain Glasses
Sh0rtfuze
New Recruit, just learned about 405th while in cosplay at Dragoncon
Replies
7
Views
371
Asgardianhammer
Asgardianhammer
ThreeEvening158
Work in Progress: 3D printed Reach armor
Replies
11
Views
1,320
ThreeEvening158
ThreeEvening158
LadyTano
LED strips in a Cortana suit?
Replies
6
Views
763
LadyTano
LadyTano
Back
Top