High Detail Jorge Armor files Wip

TyrDropProps · May 14, 2011

As I was drafting a model of Jorge's rifle I decided to create files for his armor as well.

The models are created using a McFarlane figurine and reference images supplied by Ruze789.

I have the back pack done aside from shaping the back to interlock with the chest but that will have to wait until I have the chest file finished.

Back pack:

Knee:

Raw .obj file:
http://www.4shared.com/file/7WCXoHWk/Jorge__Grenadier__Knee.html
Unfold with 188 mm height.
Has upper and lower support struts to prevent warping.

RedJak · May 14, 2011

thank you so much for shareing
it looks fantastic

Arioch · May 14, 2011

With such a lack of Jorge files I am so glad to see these! These are gonna be great! THANK YOU!!

Ruze789 · May 14, 2011

Hey man I'm sorry I didnt get the pictures you were looking for, my out-of-warranty 360 decided to red ring this week. Not sure when I'll get a new one. Looks pretty awesome so far though!

TyrDropProps · May 15, 2011

Ruze789 said:
Hey man I'm sorry I didnt get the pictures you were looking for, my out-of-warranty 360 decided to red ring this week. Not sure when I'll get a new one. Looks pretty awesome so far though!

No worries, I think it'll work just fine as is.

Updated first post with knee image and .obj link.

NickNackPattyWack · May 15, 2011

I found these super detailed 3d models. Just in case you need a more detailed reference
http://www.scifi-meshes.com/forums/showthread.php?77031-Some-Halo-Reach-stuff-I-must-finish

Your doing a amazing job by the way.

BenStreeper · May 15, 2011

here are some high detail shots from one of the original modelers on the Reach project. I do not have access to the models so please don't ask for them. I did not make them either (Obviously).

To be Continued in next Post

BenStreeper · May 15, 2011

Here are some shots of the Square Enix Action Figure

TyrDropProps · May 15, 2011

Thank you both for the references, they will be invaluable.
They also make me feel a huge sense of accomplishment about my attempt at the backpack, I only need to revise the tabs on the top from what I can tell.
And I didn't even know that Square had produced a figurine.

ACDCrockr209 · May 16, 2011

Oh my!

I sense an aura of awesomeness coming from that backpack and shin!

You, sir, have help me decide on my next suit after my ODST!

TyrDropProps · May 16, 2011

ACDCrockr209 said:
Oh my!

I sense an aura of awesomeness coming from that backpack and shin!

You, sir, have help me decide on my next suit after my ODST!

Thanks, glad to inspire.
Hopefully I'll have the files done before too long.

fat hi555 · May 16, 2011

I really love the look of these models!
Unfolded the shin to height of 188mm

Link:
http://www.4shared.com/file/ZPtMbNTN/Jorge__Grenadier__Knee_wtfmfkr.html

Can't wait for the other files!

misfitjh · May 16, 2011

Great work on that backpack. Can't wait to see the rest. One quick question thought. Is it just me or does it look like Jorge can mount his gun to the top of his back pack. I mean the top looks like it swings down, it has those two eye holes and if you look at the bottom of Jorge's gun it has what looks like a mount. I think maybe he can mount his gun there so it hangs down his back for easier carrying. Not trying to change the topic but just a thought.

TyrDropProps · May 16, 2011

Jorge's rifle is a modified mounted turret so that explains the mount on it.
I'm not entirely sure what the tabs on his pack are for but I assume they are for cargo hooks and/or the possibility of a parachute for air drop operations. Also, the holes in the tabs don't pass all the way through. They may have just added them because the top of his pack didn't have enough detail to match the rest of it.

IRSHCWGRL · May 23, 2011

Any updates on the backpack Wtfmflkr? It looks great!

TyrDropProps · May 27, 2011

Mflanny34 said:
Any updates on the backpack Wtfmflkr? It looks great!

Far too many personal matters have sprung up over the past few weeks, but I am still working on finishing the models as soon as possible.
The pack will have to wait until I finish the chest so that it will interlock properly.

cfh935 · May 27, 2011

Wtfmfkr said:
Far too many personal matters have sprung up over the past few weeks, but I am still working on finishing the models as soon as possible.
The pack will have to wait until I finish the chest so that it will interlock properly.

Take your time bro, we'll all wait patiently with baited breathe

HaloGoddess · May 28, 2011

Out of curiosity, do you think you will also be creating his gun too? And if you do, will it be a full model or a sliced file? For the size of his gun, I think a sliced version might be good for that.

Ral Partha · May 28, 2011

HaloGoddess said:
Out of curiosity, do you think you will also be creating his gun too? And if you do, will it be a full model or a sliced file? For the size of his gun, I think a sliced version might be good for that.

He actually did it first, or still in the process of finishing it.

Jorge's M247H Heavy Machine Gun WIP

eliteslayer032 · Oct 31, 2011

my odst (next costume )will have aspects of jorge (knee, back pack,)AND AM I GLAD I found this thread i havent been able to find his knee by itself or such high detail backpacks so thank you for making these

High Detail Jorge Armor files Wip

Member

Member

Well-Known Member

Sr Member

Member

Member

Well-Known Member

Well-Known Member

Member

Well-Known Member

Member

Active Member

Well-Known Member

Member

Active Member

Member

Member

Well-Known Member

Sr Member

Jr Member

Similar threads

Similar threads