File it under Crimmson

Crimmson · Feb 2, 2013

zombiegrimm · Feb 2, 2013

Very impressive. Hope to see you do the whole model. I would love to build this as an armor set.

Crimmson · Feb 3, 2013

Crimmson · Feb 4, 2013

halo 4 assets
https://www.dropbox.com/s/xmfjx2draw742ey/Halo 4 Modeller Asset Pack.rar
thank you Arcanine, Elijah, and Gravemind for without you guys help we would not have these. thanks

Crimmson · Feb 4, 2013

found this a while back dont know who drew this concept, but i started to model it. dont know when it will be done but i just wanted to tease you guys. it still needs a lot of work and i have never modeled a helmet sooo yeah..... enjoy none the less.

Seth Knight · Feb 4, 2013

I have to say, great work! I haven't seen much replies to this, probably because it isn't spartan armor, and that it would be really hard to create this in real life, but I may have a few thoughts on that.

Make the whole boy in pep, make a mold of it, then cast it in latex rubber, much like the ones they make the batman cowls out of. It wouldn't be the best as far as mobility goes, but it may be the way to make this suit more game accurate, just my two cents there.

looking forward to seeing more!

-Seth

Crimmson · Feb 4, 2013

Seth_Knight_of_New_Wales said:
I have to say, great work! I haven't seen much replies to this, probably because it isn't spartan armor, and that it would be really hard to create this in real life, but I may have a few thoughts on that.

Make the whole boy in pep, make a mold of it, then cast it in latex rubber, much like the ones they make the batman cowls out of. It wouldn't be the best as far as mobility goes, but it may be the way to make this suit more game accurate, just my two cents there.

looking forward to seeing more!

-Seth

Thank you Seth. I just want to model something that is not to popular, for lack of a better way to explain it. I had looked for files for prometheans a while back could not find any. Now that I am learning how to model in blender I figured I should start with the promethean armor since not to many files exist. I hope to eventually work my way up to halo 4 promethean armor as well.

On the chest piece I think I am going to scrap it as I feel the back is to far up high. As I thought about how to model it I decided to just model the whole armor at once and then split it. Stay tuned.

Sunstarx55 · Feb 5, 2013

YES! I have always wanted someone to make one of these !

That is a Forerunner level 12 Combat Skin btw

Crimmson · Feb 5, 2013

Sunstarx55 said:
YES! I have always wanted someone to make one of these !

That is a Forerunner level 12 Combat Skin btw

I honestly don't know why I named it promethean. Ha. I will resume working on these when I get done with my shift. It lasts a week and then I am off for three days. I hope you guys like the one weapons. Let me know if you find any thing wrong with these or if you would like some changes.

Crimmson · Feb 11, 2013

quick update:

making slow progress. i got a little monkey next to me asking me a million questions and pulling me away from the comp. how do i make the pictures smaller when i upoad them. and does any one know how to scale a model in blender i am having problems remembering or if i even read it to begin with.

kinda of reminds me of a chicken.......a robot chicken eh, maybe i need to go raid the fridge. hmmmmm chicken.
i really enjoy modeling especially while listening to avicii, deadmaus, armin, kill the noise, knife party yeah.... they really help get the creative juices flowing.

Seth Knight · Feb 12, 2013

I wish I knew modeling SO badly, there's a million and one things I would model (and more, since I'm always coming up with things

) The ODST concept helmet is looking great (and there's some people waiting on that one in the H4 Helmet Request thread, so you may need to tell them if you work anymore on it) and the the forerunner is looking great as well

Keep it up (and keep making me envious of your skills

)

-Seth

Crimmson · Feb 12, 2013

Seth_Knight_of_New_Wales said:
I wish I knew modeling SO badly, there's a million and one things I would model (and more, since I'm always coming up with things ) The ODST concept helmet is looking great (and there's some people waiting on that one in the H4 Helmet Request thread, so you may need to tell them if you work anymore on it) and the the forerunner is looking great as well Keep it up (and keep making me envious of your skills )

-Seth

i am still learning a lot on blender. i dont have skills yet ,but i will keep at it unitll it becomes second nature. i actually enjoy modeling more than drawing. the odst helmet is going to be a while, i honestly believe it needs alot of work to get to the way i want it and not what my present skills are letting me model. learning modeling is not that hard. kingrahl helped me out on this, he said crimmson watch these videos http://www.youtube.com/playlist?list=PL2BA5BDF79FF50122 and these as well http://www.youtube.com/user/ward7299/videos?flow=grid&view=1 , now go and make something boy. and i was like sir, yes sir and i took off like a good little recuit. ha. either way Seth, if i can learn it with very little time on my hands, i work in the oil fields for a week, off three. then i split my time with the wifey, my two little monkeys , closing on a house, switching from night shift to day shift and vice versa every week. but i really want to learn modeling. so watch these videos and you will suprise yourself how fast you will pick it up. when i first watched these i said to myself i only need to learn enough to make pep models, but the bug took a deep bite and watching dystored incs models, digital cantinas etc, the more i wanted to learn all of it.

Seth Knight · Feb 12, 2013

I'll try it when I can, thanks for the links, it's something I want to learn sometime, thanks, and keep up the good work, and though I can see it being fun, I doubt anything could replace drawing to me

-Seth

Crimmson · Feb 21, 2013

taking a break from the forerunner, not for long just trying to figure out how to design the back. after multiple tries i decided to do something else for a bit. what do you think? Its King Crimmson... or atleast that what i call it. derp.

got rid of the dots on top of the crown, figured they are easier to make from scratch than from pep.
link:
http://www.mediafire.com/?cckg28w2iyjn5n4

Crimmson · Feb 22, 2013

GEARS OF WAR!!!!!

http://www.mediafire.com/?gg7gsbfsckqrzg2

I am bored and i have no ideas for the back torso of the forerunner. enjoy

Seth Knight · Feb 22, 2013

I love it

What you may want to do it make the emblems very thin, so not only are the pep-able, but could be attached to someone's armor as a beveled detail, but that's just an idea. You could also beef them out a bit, then you could cover in plaster (or polyurethane) and pour in some fiberglass resin to get a semi clear material (I was thinking it would be a nice touch to the gears of war emblem

Nice work! You're really making me want to get in to modelling now >(

-Seth

Crimmson · Feb 22, 2013

Seth_Knight_of_New_Wales said:
I love it What you may want to do it make the emblems very thin, so not only are the pep-able, but could be attached to someone's armor as a beveled detail, but that's just an idea. You could also beef them out a bit, then you could cover in plaster (or polyurethane) and pour in some fiberglass resin to get a semi clear material (I was thinking it would be a nice touch to the gears of war emblem

Nice work! You're really making me want to get in to modelling now >(

-Seth

The gears of war I am going to make it large enough to hang it on my garage wall, I was thinking of casting it in clear plastic or something similar and adding LEDs to light it up. Or somehow attach it to a parking aid inside the garage that lights it up when the wheels cross the sensors. I have been wanting to make that for a really long time, just got to get it unfolded. I really think you would enjoy modeling, especially with the right music playing and a large jug of over sweetened tea.

Crimmson · Feb 23, 2013

Teaser

started on this a couple of hours ago, but sadly i need sleeps. I will continue on this later on today, the forerunner will have to wait until i get back in home( using my sister in laws computer)

Seth Knight · Feb 23, 2013

Got the Gears of War Emblem unfolded, it's set at 12 inches tall (and wide, it's a cog you know

), I'm thinking that it would be even better to be scaled say, two or even three feet tall, but hey, I'm just getting it ready for that

Let me know if the link works/or if you see any problems with the unfold.

https://www.4shared.com/file/oMdiVjrP/GoWEmblemCrimmsonArmorer.html

P.S. Yeah, I'm the Armorer, it's a WHOLE LOT FASTER to type than Seth_Knight_of_New_Wales

P.S.S. Thank you Crimmson for the video links, one in and I've already learned a LOT, hopefully I'll be able to keep learning and get to the point where I can create my own models

-Seth

Crimmson · Feb 23, 2013

Seth_Knight_of_New_Wales said:
Got the Gears of War Emblem unfolded, it's set at 12 inches tall (and wide, it's a cog you know ), I'm thinking that it would be even better to be scaled say, two or even three feet tall, but hey, I'm just getting it ready for that

Let me know if the link works/or if you see any problems with the unfold.

https://www.4shared.com/file/oMdiVjrP/GoWEmblemCrimmsonArmorer.html

P.S. Yeah, I'm the Armorer, it's a WHOLE LOT FASTER to type than Seth_Knight_of_New_Wales
P.S.S. Thank you Crimmson for the video links, one in and I've already learned a LOT, hopefully I'll be able to keep learning and get to the point where I can create my own models

-Seth

OOOOOHHHHHH yeah. thank you Armorer. Make sure you put your name in it aswell as i dont know how and thank you. I know you will learn it and i hope you as much fun with it as i do.

File it under Crimmson

Well-Known Member

Active Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

New Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Similar threads

Similar threads