Halo 4 Locus Helmet (Short WIP)

A

ABYISZ

New Member

• Sep 11, 2013

• #1

Hi yall, I've been around the forums for a while and have not posted anything at all. I only recently have gotten into this side of the creative spectrum and am pretty entranced. Now, this is going to be a pretty short thread and I'll explain why. I bought this Locus Helmet from Armory Props, more specifically from Jose Valdez. Its a great helmet and was very well made. It was a raw cast and I have done all the extra work on it like the sanding and such.

Now to the good part. With all that extra stuff outta the way, I began the painting process; first a layer of black, and then a taping off of all the necessary black parts. This was followed by a coat of (I used "Soft Iron Metallic) "steel" paint. Then taped off the other areas for the "X" and such and then lastly the little white details that are on the helmet. The helmet is not done being painted, I do have some touch ups to do, and may or may not "damage" it some. All in all it has turned out pretty well. When the paint process is complete I am going to trim a section of the helmet off and have it come on and off with magnets ("Back-off" mod by Impact Props). And then trim the visor off and do the same trick. In the mean-time, I will be playing with a clear visor I also bought from them.

Alakazam!!






I do have some reference shots I took in-game, they're a bit big so I'll re-size them and post'em later for anyone to use.

 

Attachments

• 
  1234448_637577886281962_191639219_n_zps2581d853.jpg

  71.4 KB · Views: 1,854
• 
  1234310_637577876281963_739155304_n_zpscc2d753f.jpg

  77.6 KB · Views: 436
• 
  1185852_637577869615297_1614748287_n_zps98cfb917.jpg

  67 KB · Views: 313
• 
  1174968_637577872948630_239358395_n_zps3cc5605e.jpg

  67.8 KB · Views: 678
• 
  1098131_637578112948606_766398873_n_zps6fa5551c.jpg

  68.6 KB · Views: 370

Hyperballistik

Well-Known Member

Southern Regiment

• Sep 11, 2013

• #2

Nice paint job, the helmet looks great

 

lordhood32

Active Member

Southern Regiment

• Sep 11, 2013

• #3

I'm sorry, Am i the only one that noticed the Change on the helmet,

Also nice build man

 

A

ABYISZ

New Member

• Sep 11, 2013

• #4

Thanks Hyper and Lordhood, more pictures to come soon, probably not till friday? though.

-And as for the "change" I got this huge Boot Beer Mug thing once, and use it to store change, and it is sized just right that I can use it instead of a foam head for now.

 

M

Motion26

New Member

• Sep 11, 2013

• #5

Lookin good!! with a little bit of weathering that thing will look pretty beast! One thing I'm kind of curious about is how people set up the visor on a locus helm, where are you going to see out of?

 

A

ABYISZ

New Member

• Sep 11, 2013

• #6

Thanks. For the hard visor, currently still attached, I will dremel it off and then have it come on and off with some small rare earth magnets. I bought a clear vacuum form visor from them as well though, so for that I have bought nightshade headlight tint for cars, and I am ordering some yellow headlight tint as well. I'm testing those two paints on some other random clear plastic pieces to see if I can get it to "sync up" at least fairly well. If I can get the clear visor how I want it, then it will be installed permanently, while keeping the hard visor as a back-up. Should the clear visor plan fall through, it shouldn't, but if it does, I might consider having the visor go up and down like how the face plates of the ironman helmets do. I have backup plans for my back up plans.

As for weathering, I have decided not to do to much, really just on the edges and such. I want it to look "worn" but still mostly just off the assembly line. For that I'm going to use some silver paint to give the illusion of metal under all the paint.

 

M

Motion26

New Member

• Sep 11, 2013

• #7

Sounds interesting. And yeah, I think that little wearing will go a long way, will make it seem more metallic less plastic. Cant wait to see how this turns out!

 

A

ABYISZ

New Member

• Sep 14, 2013

• #8

Alright y'all, spent friday fixing paint, weathering up and implimenting the "Back-off" mod I talked about. Not much to say other than that its now complete and ready for your views.









Again wanna thank Armory Props and Jose Valdez for their cast, Impact Props for the "Back-off" mod idea and you all for taking the time to look at this.

 

Attachments

• 
  BD_F_zps43e95310.jpg

  87.3 KB · Views: 354
• 
  BD_LS_zpsece8ade7.jpg

  83.9 KB · Views: 303
• 
  BD_RSS_zps0efe95cb.jpg

  62.6 KB · Views: 325
• 
  BD_RS_zpsebf5fcf7.jpg

  90.9 KB · Views: 393
• 
  BD_LSS_zpsb0b31c8d.jpg

  76.2 KB · Views: 427
• 
  BD_BO_1_zpsc58f37ec.jpg

  91.5 KB · Views: 294
• 
  BD_B_zps3152c519.jpg

  66 KB · Views: 347
• 
  BD_BO_2_zps967f83f8.jpg

  87.3 KB · Views: 315

C

Chainsaw ninja

Jr Member

• Sep 14, 2013

• #9

yeah whats with the coins? nice job btw

 

A

ABYISZ

New Member

• Sep 14, 2013

• #10

thanks, the boot stein glass is what I use to hold extra coin, and just happened to be tall enough to hold the helmet until I get a styrofoam head.

 

M

Motion26

New Member

• Sep 14, 2013

• #11

That looks awesome!!!! I knew the weathering would make it look even better xD

 

A

ABYISZ

New Member

• Sep 14, 2013

• #12

I definitely agree, at first the initial idea was pretty much just some of the edging and then maybe a couple streaks on the visor and all, but well, to quote some memes, "That escalated quickly." lol. Yeah, it fits the helmet I think and works well. I've had tons of compliments on it on facebook and work and such. I'm going to add a couple magnets for the visor and then maybe post a short video for how the "Back-off" works and all. But I am very happy with this helmet. Now, all I have to do is wait for more of the armors to come out for foaming and pep, and perhaps I'll make my full suit from H4.

Helmet: Locus
Chest: Tracker
Shoulders: (R) offhand think its pathfinder? (L) Mk V
Forearms: Outerplated
Legs: ODST

 

Attachments

• 
  fullbody?target=large.png

  177 KB · Views: 2,110

D

Dorvack

Jr Member

• Sep 14, 2013

• #13

I like the weathering, but some of the scratches look a bit too regular.

It you take a bit of sponge, dip it lightly in silver paint, wipe most of it off and dab the sponge on some of the heavy use areas, it might add some visual interest. You could also do this with dark gray / black paint on the stripes. Test it on scraps first though.

You could also go over the armor plate edges with the flat edge of a silver pencil to create wear marks. The good thing about this method is that if you go too heavy, you can take off the excess with an eraser. Again, test this on something that you don't mind ruining, just in case.

Nice work overall though.

 

A

ABYISZ

New Member

• Sep 15, 2013

• #14

thanks Dorvack, I'll look into that, though since I think I'm done with this one, maybe on the next.

Well, a little premature but I do have a small video ready for ya'll. Mostly showing how the magnets are working. I will be fixing some small details on the helmet like adding a few more magnets to the visor.

Thanks for all the comments.

 

Last edited by a moderator: Jan 1, 2017

K

KaylaKerigan

New Member

• Sep 16, 2013

• #15

wow that looks awesome ^_^

 

A

ABYISZ

New Member

• Sep 16, 2013

• #16

Heres a couple quick "Selfies," lol.

 

Attachments

• 
  image_zps133dd415-Copy_zps88c7c20f.jpg

  71.5 KB · Views: 451
• 
  image_zps6dd3a716-Copy_zpsa8708d58.jpg

  57.8 KB · Views: 360
• 
  image_zps6b902d08-Copy_zps21d36edc.jpg

  59.9 KB · Views: 362
• 
  image_zps8c441148.jpg

  55.9 KB · Views: 1,409
• 
  image_zps5bdb1213-Copy_zps07146188.jpg

  54.2 KB · Views: 346
• 
  image_zps37c7ab6d-Copy_zpsb63c5dfd.jpg

  68.3 KB · Views: 338

S

spartan IV

Jr Member

Midwest Regiment

• Sep 16, 2013

• #17

As cool as the helmet looks a full set should look amazing. Great job with the paint.

 

B

BiGHARYSCOTSMiN

Member

• Sep 16, 2013

• #18

so... how do you see out of it?

Great helmet tho. I'd go as far as to say probably one of the best I've seen yet.

Gotta admit some of those MC helmets are really good but this one is waaaaaay up there.



Hope you make the rest of your suit... I'd love to see it.

 

A

ABYISZ

New Member

• Sep 16, 2013

• #19

You can do a vacuum-formed visor, I did buy one from Armory Props too, haven't done it yet. That visor would be clear and can be tinted with headlight paint from an auto store or such.
The way I have it set up right now is the same way Jose has his, we dremeled the visor itself straight off, and have it coming on and off with magnets. Like I said in the video as you're walking around at places like Pax or such you can have it off and then when you pose for pictures and things you put it on.





I'm still trying to figure out exactly how to do the paint on the clear visor I bought. I have Black headlight tint (VHT Nightshades), but it wouldn't look like the "steel" paint. And then as for the yellow "X" on the visor I was looking at some yellow headlight tint on amazon and eBay, but that can is around 3oz and $32-35. I'm going to keep looking and see what I can find to get it as close as possible to the original paint and if I have to I'll succumb to the pressure and buy the yellow tint. Still $35 is a lot for a little ~3oz can of spray tint, Nightshades was $17-19 and was the equivalent to an actual spray paint can. I have seen some "Smoke" tint so I guess I could always buy a can of that too and kinda mix both the Nightshades and smoke together and see how it looks. It has to be mildly dark so people can't see in, but still capable of being seen out of by the wearer.

This project is done but not done at the same time for the above reasons. When I figure things out I'll post my results and I guess a lil how-to on how I did it. So yeah, still a little bit of progress to go and then completely finished with this helmet. Again thanks for all the comments and feedback.

 

Attachments

• 
  image_zpsaa4d5092.jpg

  30 KB · Views: 554
• 
  image_zpsb5fe0ce0.jpg

  30 KB · Views: 277
• 
  image_zpsa5c7408c.jpg

  28.2 KB · Views: 270
• 
  image_zpsca1e3081.jpg

  27.6 KB · Views: 290

D

Dorvack

Jr Member

• Sep 17, 2013

• #20

If the visor is vac-formed from policarbonate, Tamiya makes a rather good 'smoke' paint for RC car bodies. The product number is PS-31 and it should cost less than $8 for a small spray can. Tamiya also makes a translucent yellow policarbonate paint (PS-42) and a translucent silver policarbonate paint (PS-36) which might work for you in some combination.

You apply it in light coats and stop when you have the desired darkness of tint. A little goes a long way...

Policarbonate paint only really bonds to policarbonate / lexan, but there's also a version of the 'smoke' paint for plastic. TS-71 is the product number.

Good luck.