Restarting my Freelancer Medic

JD of Asgard · Apr 21, 2015

So it's taken me like 9 months to start getting some steam behind this project. Between work, and learning the in's and out's of Pepakura through trial and error...
But I had a whole week off last week and not only did I build a pelvic armor but decided to revisit my helmet to see if I could improve it at all. It came out better than expected so I decided to revisit some other peices I've made and restart this project.

Agent Virginia build:

I was going on this weird assumption that I had to be able to just slip into these armor peices and would scale them up so that I could slide them on. But then they always made me look like a kid trying on his dad's clothes. Just recently discovered magnets and other methods to make this whole process a lot easier.

TheUX31EGuy · Apr 21, 2015

Your pep work looks very clean!

Yeah, there are a bunch of methods of holding your armor on, magnets, straps, etc. Somebody will hopefully chime in about what they used to hold their armor on...

arma358 · Apr 21, 2015

I think there's a post somewhere in this particular forum about materials to hold things up.

Darktemplar · Apr 21, 2015

VELCRO. A LOT OF VELCRO. (Strong, easy, cheap.)

arma358 · Apr 21, 2015

I know Velcro is popular, but I've also seen magnets and other similar materials used.

JD of Asgard · Apr 22, 2015

yeah i'm using the magnets to hold together the two peices on the cod peice. Going to do the same when I rebuild the torso at a better scale. I'll probably use velco somewhere between the peices.

Black Rabbit · Apr 22, 2015

Looks awesome! I used magnets for the cod piece as well. I also used them for the part on my chest piece that opens up so I can put it on. For my biceps, I used heavy duty domes because my undersuit has vinyl on it and is strong enough. Had to strap my thighs though. Only thing I found with velcro is it cause some fabrics to have areas of fuzziness if the velcro gets stuck to it.

I totally recommend domes if your undersuit won't stretch!

JD of Asgard · Apr 23, 2015

Added some Project Freelancer flair on the helmet. I think that it really brings it all together. :]

JD of Asgard · Apr 23, 2015

Black Rabbit said:
Looks awesome! I used magnets for the cod piece as well. I also used them for the part on my chest piece that opens up so I can put it on. For my biceps, I used heavy duty domes because my undersuit has vinyl on it and is strong enough. Had to strap my thighs though. Only thing I found with velcro is it cause some fabrics to have areas of fuzziness if the velcro gets stuck to it.

I totally recommend domes if your undersuit won't stretch!

yeah i was thinking about using similar methods for my own. pretty sure i'm going to use these magnets on the chest peice and using velcro for the other areas. I'll have to look into those domes though!

JD of Asgard · May 10, 2015

Update on my medic! Finally got the hang of this whole scaling thing. With the helmet and torso I felt like I'd just gotten lucky or something, but I've made like 3-4 chest pieces in the past that have either been far too small or far too big. This one is coming together swimmingly thanks to the inclusion of magnets into my design and some elbow grease.

I'm leaving a few small spaces open for after my paint job in order to install lighting. I have more work to do in the back as well as sealing some parts down but I wanted to finally try on the frame I'd built to see how it fit. Starting tomorrow I'm going to smooth down some of those hot glue bubbles and work on finishing the rest up.

With this done the major pieces are all built and I can start working on the less detailed and smaller pieces like biceps and whatnot!

ErMaC · May 11, 2015

Looking good so far sir.

Starrmont · May 11, 2015

Sounds like you've already got the magnets worked out, but I just watched the turorial from Cereal Kill3r on installing magnets in your armor, and it's really good! (but kinda long) Hopefully there's some good info in there you can use! XD

JD of Asgard · May 11, 2015

I've seen a few of his tutorials but not this one. thanks! Any little info that might help my technique is always welcone!

Starrmont said:
Sounds like you've already got the magnets worked out, but I just watched the turorial from Cereal Kill3r on installing magnets in your armor, and it's really good! (but kinda long) Hopefully there's some good info in there you can use! XD

Starrmont · May 11, 2015

JD of Asgard said:
Any little info that might help my technique is always welcone!

It's a constant learning process. Why do we do any of this if not to improve, eh?

Reii · May 11, 2015

A medic rocking the recon helmet, I like it!

JD of Asgard · May 12, 2015

Reii said:
A medic rocking the recon helmet, I like it!

gotta be steathly man! don't want to get all shot up trying to save someone's life!

JD of Asgard · May 28, 2015

Some progress! Finished the back up. Got most of the glue bubbles and rough spots smoothed out. What's left should be covered when I plastidip it. I've tried making like 3-4 torso's before and this one fits the best!

I also used my wife's photography camera to snap the pics. Amazing how the quality jumps with the right camera!

strandedninja · May 28, 2015

Love it.

Are you going for a white under suit as well?

JD of Asgard · May 28, 2015

strandedninja said:
Love it.

Are you going for a white under suit as well?

I've been jumping back and forth on that one. I think the white would go well with the color scheme I already have. I could maybe use red 3D fabric paint to do some accents and stuff on the suit like I've seen done on some Spider-man cosplays. but that classic black just keeps pulling me back every time I think this.

strandedninja · May 28, 2015

Then what about black with white piping/accents?

Restarting my Freelancer Medic

Active Member

Jr Member

Active Member

Jr Member

Active Member

Active Member

New Member

Active Member

Attachments

Active Member

Active Member

Well-Known Member

Member

Active Member

Member

New Member

Active Member

Active Member

New Member

Active Member

New Member

Similar threads

Similar threads