Reply to thread

Message

Firstly, the files came from [USER=18606]MoeSizzlac[/USER] , who always does great work, and were easy to print out. [ATTACH=full]349964[/ATTACH]
They were printed and assembled, with bondo and filler primer for the gaps and print lines. They were then hit with coats of rustoleum Oregano, followed by sponged on acrylic olive green. Olive mixed with black was used for shading, and a gunmetal was used for the scuffs and weathering. The suit was then sealed with some semi gloss clear coat
[ATTACH=full]349965[/ATTACH]
This photo shows the weathering up close, and is from the first full suit up and test. It was also taken on August 30th, just two days before DragonCon started!

[QUOTE="LadyTano, post: 846064, member: 45981"] Firstly, the files came from [USER=18606]MoeSizzlac[/USER] , who always does great work, and were easy to print out. [ATTACH type="full" alt="firstcoat.JPG"]349964[/ATTACH] They were printed and assembled, with bondo and filler primer for the gaps and print lines. They were then hit with coats of rustoleum Oregano, followed by sponged on acrylic olive green. Olive mixed with black was used for shading, and a gunmetal was used for the scuffs and weathering. The suit was then sealed with some semi gloss clear coat [ATTACH type="full" alt="8CCB4AA0-1422-4845-A379-373052BFDF10.jpg"]349965[/ATTACH] This photo shows the weathering up close, and is from the first full suit up and test. It was also taken on August 30th, just two days before DragonCon started! [/QUOTE]

This thread is more than 10 months old.

Your message may be considered spam for the following reasons:

This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.

If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.

I am aware that replying to this thread may be considered spam, but I still want to make a reply.

Verification