Calgary Expo 2023 Booth Planning

Status
Not open for further replies.
What time are we able to begin moving in? Phil and I are coming down Wednesday night with the trailer and will need to offload so we can ferry other items to the expo grounds.
Meant to talk to you further about that. I think I’m going to have to head down Thursday morning first thing. Alex didn’t realize the expo was 4 days long, so I’m going to have to help her out that evening with the kiddo. As well, by the time I get off work, get the trailer loaded up, etc, it would make for a very late night. If we take off at 6 am or so on Thursdaywe can still be in town early!
 
What time are we able to begin moving in? Phil and I are coming down Wednesday night with the trailer and will need to offload so we can ferry other items to the expo grounds.
No specifics yet. They just were doing Megacon this past weekend so communication is always slow. As soon as I find out I'll let you know.
 
Hey gang, just wanted to pipe in here. I have shifts with the Star Wars clubs on most days, but IIRC have kept Saturday totally clear to focus on Halo! As for the parade, I will likely be in my Mando, but I'm reviewing my schedule to see if I can make ODST work instead.
 
7 days of straight work and I’m getting onto the final texture steps for the rocks. The concrete wall is all built and beveled. Just needs to be sealed with glue and then painted. Continuing to wait for stuff to dry so I can keep at it. The black/pink/blue tissue paper wall section is being a royal pain in the ass and I don’t know if I can budget more for glue at this point.

Estimated final cost after paint and pipe and such is around 11-1200 all in at current pace.
 

Attachments

  • D1FA7D3C-1935-46D4-9141-A637D16F9383.jpeg
    D1FA7D3C-1935-46D4-9141-A637D16F9383.jpeg
    1.9 MB · Views: 141
  • E2D7C7BC-0831-4BA8-97F3-85E4340B5ADC.jpeg
    E2D7C7BC-0831-4BA8-97F3-85E4340B5ADC.jpeg
    4.4 MB · Views: 137
  • 9D162A7F-9AFA-4B81-9D4D-195D256AAFD3.jpeg
    9D162A7F-9AFA-4B81-9D4D-195D256AAFD3.jpeg
    4.9 MB · Views: 132
  • AEEAF533-AC4C-45B6-805E-C935897297CB.jpeg
    AEEAF533-AC4C-45B6-805E-C935897297CB.jpeg
    1.9 MB · Views: 130
Last edited:
7 days of straight work and I’m getting onto the final texture steps for the rocks. The concrete wall is all built and beveled. Just needs to be sealed with glue and then painted. Continuing to wait for stuff to dry so I can keep at it. The black/pink/blue tissue paper wall section is being a royal pain in the ass and I don’t know if I can budget more for glue at this point.

Estimated final cost after paint and pipe and such is around 11-1200 all in at current pace.
Wow, the display looking good.
 
IMPORTANT
Bad news folks, I'm at my limit dollar wise and I won't be able to get paint before expo. Without anyone helping with the costs I have run out of gas. I've been carrying the project solo for a while and had to spend extra to just get it back off the ground. I'm gonna need assistance to get the last of the supplies for the following.

Grey Paint
Black Paint
White Paint
Silver paint (Pipe work)
Fake vegetation
Green paint 2 shades
Sponge brushes
Chip brushes for dry brushing

I plan to use house paint to do all the walls

Lumber for legs.
Fasteners (screws) to secure the legs.

Estimated total 150 - 200$ all in.
 
IMPORTANT
Bad news folks, I'm at my limit dollar wise and I won't be able to get paint before expo. Without anyone helping with the costs I have run out of gas. I've been carrying the project solo for a while and had to spend extra to just get it back off the ground. I'm gonna need assistance to get the last of the supplies for the following.

Grey Paint
Black Paint
White Paint
Silver paint (Pipe work)
Fake vegetation
Green paint 2 shades
Sponge brushes
Chip brushes for dry brushing

I plan to use house paint to do all the walls

Lumber for legs.
Fasteners (screws) to secure the legs.

Estimated total 150 - 200$ all in.
VonSnake and I can chip in $50 each if you let us know where to send it.
 
I have some fake veg I can bring, I also ordered the netting.
Also Mads armory rack is painted and imma try to meet up with James soon to exchange some stuff.

My crate is still in the finishing process. I better have Fibreglassing and sanding done this weekend cuz I still need to get the wire grid so we can ziptie guns to it.. and somehow I gotta figure out how to attach that to the backing board…

I probably won’t be able to weather it much but I have a feeling the con itself will be enough weathering.

Wish you weren’t so far away Viper 466 i have almost all that stuff on hand here in Calgary.
 
Update. Thank you for the donations folks. I immediately put them to good use. For the fake vegetation I’m going to be adding moss and ferns directly to the walls to help. I got some moss donated and just need to get the rest. Paint purchased and Phil gave me some white for drybrush mixing.

Current state of walls. I’m accelerating as we get closer to expo but I should have another update next weekend.

Anyone working in projects please drop image updates to keep everyone up to speed next Saturday so we can continue final preparations for travel and planning layout.

BAF57904-858D-4091-A49D-15C10AD8312E.jpegAD20C143-0F16-4F3C-9018-0DF558319E6F.jpegFA02A52A-FB46-4BBA-B688-3292D1302167.jpeg
 
IMPORTANT PLEASE READ
Alrighty folks, last updates before con. Any and all who are building Mommabear ,James Electraknite please post progress pics by Sunday night.

The Joker Wildcard Shoot has been moved to Saturday at 2:00 PM. Asking for folks to watch the booth while we move to the shoot and back. Anyone who doesn't wish to go is perfectly fine. PLEASE VERIFY YOUR TIME SLOTS.

I'm working on the last of the wall fabrication/paint and building legs as well as paint and add vegitation tonight/tomorrow. We are 5 days out to initial load in at 5-7pm Wednesday.
 
Hello all! I'm excited to be seeing all of you very soon!

@Viper466 has tasked me with arranging for the set up etc. at Expo.

Expo requires that we book times now to use the loading area. For obvious reasons they can't have all of the vehicles arriving at the same time. We are considered "orange zone" which means we have to load in between 5 - 7 Wednesday evening or between 7 am and 11 am on Thursday morning. I am booking @Viper466 in for a slot between 9:30 and 10:30. We MUST be loaded in completely by 11 am on Thursday. The show opens to the public at 4:00 pm on Thursday but I believe that VIP's get in at least an hour earlier. To be safe, we are capping our set up time to 2:00 pm.

I know that there are a few others who have items to drop off. I will need to book you a time as well. Please message me so we can work that out. Keep in mind - this is ONLY if you need to drop off the items using the loading area with a vehicle. If you can just walk the items in easily from where you park in the parking lot, we don't need to book you a time. You do need to bring them in at the back though, (marked in orange on the 1st map below) if you are coming in outside of the convention being open. Keep in mind as well that the Expo Centre has very strict rules about what can come in it's front doors, so when you bring in your costume - bring it in the back. They will not allow you to roll anything on those front floors. If you can carry it, easily, you should be okay. Normally this would be so easy - we'd have a change area to store everything and you wouldn't need to do that. However, they weren't able to give us that this year do to space restrictions. So we just have to do our best. WHEN IN DOUBT - CALL/TEXT ME - 780-910-4737

We have exhibitor badges and the Expo has kindly given us this for free. The Expo has also given us the booth space for free. Given that, please, please, please if you can and you haven't contributed in other ways with builds of your own, throw some money at Viper466. He's posted an accounting of what he has spent, which, can be used time and time again for the group. If you have done a build - please discuss that with Viper466 so we can work on trying to even out the expenses across everyone.

As an aside, I need to remind all of you that you are representing not only Snowburner but the Canadian Regiment and the 405th as a whole while you are at this event. Please be on your best behaviour. Stuff is definitely going to go sideways and likely multiple times. So much of what happens at these events is out of our control and lots of times the information coming in gives us mixed messages and can be confusing. When this stuff happens, take a deep breath and reach out to me or to Viper466. Let us deal with whatever it is. We have to be kind to Fan Expo Staff and Expo Centre Staff. They are all just doing their jobs and what they are told. Please be kind to the other fan groups and to other costumers. I know it's easy to judge but remember, we all started where they are. We are ambassadors for not only the 405th but also for what costuming groups SHOULD be. Uplift everyone. The other fan groups around us are great people. We're very fortunate as that isn't always the case. Embrace the community and show everyone how freakin' fabulous this group is.

Make sure to put your best foot forward. Bring your deodorant and use it often but don't douse yourself in shower in a can. Wear 405th logo clothing or other Halo clothing while working in the booth and not in costume. If you have neither of those, don't worry. Just dress nicely in something non-fandom. Please make sure that you show up on time for your shifts. And check in often to see if we have a gap in coverage that we're looking for people to cover. It's so easy to let time slip away at a convention so make a point to keeping yourself to the schedule. Don't give club information to people if you aren't sure you have the correct answer. Remember no one needs a costume to join and deployment is not a requirement. We also have a tier system for deployment for those that wish to deploy allowing for a very wide range of builds being deployed. The forum is the home of the 405th. The social media assets are extra add ons so please direct people to the forums.

People want to see costumes so if you want to hang on in the booth in your 405th costume even outside of your shifts that's totally fine. However, be aware of what you are doing. If you're all standing in a circle chatting with one another, you're making yourself unapproachable and potentially blocking people from getting in to the booth.

Any questions, please let Viper466 or myself know. I'll be there Wednesday at 5:00 to get the badges and scout out our spot. We will be there for set up at 8:30 Thursday morning as well and can come out back to give you a badge as you arrive. Just text me and let me know when you plan to arrive. We are located in Hall C in booth 613. We are directly across from the Family Zone. On the other side of the Family Zone directly across from us is the Star Wars groups and on the end of our row is the Ghostbusters of Alberta. On that note, it's going to be LOUD. The Ghostbusters are generally very loud and I image in the Family Zone is going to be very loud. Because we don't have a charity with us, I highly recommend telling people that if they wish to donate after getting a photo with us that they can contribute at either the Ghostbusters or the Star Wars booths. There isn't much sense in us bringing in another charity to such a small area but we most definitely can help build the donations of the two that are there!

I know this is a lot and frankly I've likely missed some stuff. Please let me know if you have any questions!

1682446832530.png


1682446859707.png
 
Status
Not open for further replies.
Back
Top