Mark VI Mjolnir Powered Assault Armor GEN 3 - 3D Printed - Full Walkthrough

[Draxes]

Just following up, the armor and helmet remaster went out today! I'm super proud of the improvements made and think it will help a lot of folks out! Those that purchased the older version should get an update email in the coming hours with a new download link .

Can I just say, WOW. I only looked at just the Helmet files and they are spectacular. You really thought of everything. I was just about to do a printout of my modified previous version you had, but now I'll have to add all my modifications to this newest model. It is VERY nice. I LOVE the nice extra touch of providing the sizing slice. Very Very NICE!

 

[PilotBH17]

Hey Draxes! I know I'm super late to this But after seeing this build I became inspired as I am trying to make the same set of armor. Just had a few questions, with mobility, and rigging. Because most of this is 3d printed do you find any parts clash together or restrict movement at all besides the belt piece? And rigging I don't even know where to start when setting up my armor as mine as little to no attachment points built into it. Im still very new so any advice or tips on this would mean the world to me and help SOOO much. Awesome build man by far one of the coolest chief armors I've seen built.

 

[Draxes]

Hey Draxes! I know I'm super late to this But after seeing this build I became inspired as I am trying to make the same set of armor. Just had a few questions, with mobility, and rigging. Because most of this is 3d printed do you find any parts clash together or restrict movement at all besides the belt piece? And rigging I don't even know where to start when setting up my armor as mine as little to no attachment points built into it. Im still very new so any advice or tips on this would mean the world to me and help SOOO much. Awesome build man by far one of the coolest chief armors I've seen built

I am actually pretty happy with my range of movement. If you read my tutorial I go over specific spots that I had to overcome. But if I were to give one specific advice to flexibility, make sure you digitally cut out as large as you can the arm holes in the chest armor. The Galatic Armory guys just rereleased updated files so they might have fixed all those issues. I hope so. I really don't know about the new files. I would HIGHLY recommend using the newer files because it seems they tried to fix a lot of issues. As for rigging, the only real rigging I have is attaching the biceps to my torso and attaching my thighs to my belt. Most of the other armor is just held in place with my clothing.

I am actually really jealous you will be using the new 3D files. It is probably going to be WAY easier than what I had to go through. Please share with us your progress. I'd love to see how it came out. I just reprinted my helmet using the new files and it was so enjoyable.

 

[PilotBH17]

I am actually pretty happy with my range of movement. If you read my tutorial I go over specific spots that I had to overcome. But if I were to give one specific advice to flexibility, make sure you digitally cut out as large as you can the arm holes in the chest armor. The Galatic Armory guys just rereleased updated files so they might have fixed all those issues. I hope so. I really don't know about the new files. I would HIGHLY recommend using the newer files because it seems they tried to fix a lot of issues. As for rigging, the only real rigging I have is attaching the biceps to my torso and attaching my thighs to my belt. Most of the other armor is just held in place with my clothing.

I am actually really jealous you will be using the new 3D files. It is probably going to be WAY easier than what I had to go through. Please share with us your progress. I'd love to see how it came out. I just reprinted my helmet using the new files and it was so enjoyable

Thank you so much for this advice Draxes really... Already learning a lot and your thread is by far one of the most detailed I've seen. I am using the newer files and they have some attachment points on the armor that are super helpful, and the openings have a lot more clearance I believe, but trying to figure out how to rig it all is tough for me as a newbie. I supposes its part of the fun and I'll definitely figure it out! I'm thinking on using a harness system similar to yours, so I can attach some elastics and buckles and the keep the armor fitting snug without sliding. Of course man I'm going to post a forum of it in the new recruits section! You can watch the chaos of my build unfold ahahaha

 

[Draxes]

Thank you so much for this advice Draxes really... Already learning a lot and your thread is by far one of the most detailed I've seen. I am using the newer files and they have some attachment points on the armor that are super helpful, and the openings have a lot more clearance I believe, but trying to figure out how to rig it all is tough for me as a newbie. I supposes its part of the fun and I'll definitely figure it out! I'm thinking on using a harness system similar to yours, so I can attach some elastics and buckles and the keep the armor fitting snug without sliding. Of course man I'm going to post a forum of it in the new recruits section! You can watch the chaos of my build unfold ahahaha

I would recommend getting a belt like this: Versatile Waist Belt Molle System Waist Pack Set Outdoor - Temu

instead of the climbing gear I used. Much cheaper and that is really all you need.

 

[PilotBH17]

I would recommend getting a belt like this: Versatile Waist Belt Molle System Waist Pack Set Outdoor - Temu

instead of the climbing gear I used. Much cheaper and that is really all you need.

Thanks I'll definitely do that! The real fun is gonna be figuring out the undersuit ahaha

 

[BarataNet]

Good afternoon, everyone.
Where can I find these free files so I can assemble this Halo armor (Master Chief - Jhon-117) in .PDO (Pepakura) or in .STL / .3MF (3D Printer)?

 

[Otavio S]

Incrível, você pode me fornecer os arquivos da armadura? Eu quero construir uma também porque tudo é mais caro aqui no Brasil

 

[Otavio S]

Amazing, can you provide me with the armor files? I want to build one too because everything is more expensive here in Brazil

 

[Cadet]

Amazing, can you provide me with the armor files? I want to build one too because everything is more expensive here in Brazil

The files this member used are shown in the first post:

Halo Infinite Master Chief Full Body Armor STL Files | 3D Print Model

Model available for download in Stereolithography format. Visit CGTrader and browse more than 1 million 3D models, including 3D print and real-time assets

www.cgtrader.com

These are paid files that must be purchased. Here in our Group we do not endorse or support Piracy, most especially not of fan and user created 3D files. If someone is charging for their files, we will not help you circumvent that and obtain an illicit copy of that file and violate their creative commons license.

If you do not want to pay for files, please feel free to look through the Free File Index:

Free 3D Model Index

3D printers are rapidly becoming a prop and costume builders best friend and many of the members of the 405th are extremely talented at developing high definition and accurate models for printing. This thread is an index to help both new builders find quality models and showcase the hard work of...

www.405th.com

 

[Hyprfixate]

This is an incredible build! I found your build in Reddit before I even got my printer. Saved the thread and when I finally got my printer set up and going I used a lot of your ideas to get my build going! Luckily GA had updated their files before I got too far into my build so I was able to convert them, but I did use their boots bc I didn’t want covers. You did an awesome job documenting everything so much so that a total 100% newb like me was able to use it as a guide for my own build! So thank you so much for that!

I also had a question, what are you using for the ab wrap? Or have you figured anything out since posting for the ab wrap and joint parts?

 

[Draxes]

This is an incredible build! I found your build in Reddit before I even got my printer. Saved the thread and when I finally got my printer set up and going I used a lot of your ideas to get my build going! Luckily GA had updated their files before I got too far into my build so I was able to convert them, but I did use their boots bc I didn’t want covers. You did an awesome job documenting everything so much so that a total 100% newb like me was able to use it as a guide for my own build! So thank you so much for that!

I also had a question, what are you using for the ab wrap? Or have you figured anything out since posting for the ab wrap and joint parts?

Oh man, I am still trying to figure that out. I have created a custom 3D model of the ab and all the other soft parts to 3D print them in a flexible PLA...but it is SUPER difficult. I just watched a tiktok on how another Halo guy did it with his using Foam and I think I can use the techniques he used for my flexible PLA part.

But short answer is I just have a cool airsoft undershirt that looks just OK for the ab part. I'll make a post if I ever finish the undersuit in my flexible PLA. I do have a functioning flexible PLA neck piece that people really like and tha tworks well.

 

[Draxes]

The files this member used are shown in the first post:

Halo Infinite Master Chief Full Body Armor STL Files | 3D Print Model

Model available for download in Stereolithography format. Visit CGTrader and browse more than 1 million 3D models, including 3D print and real-time assets

www.cgtrader.com

These are paid files that must be purchased. Here in our Group we do not endorse or support Piracy, most especially not of fan and user created 3D files. If someone is charging for their files, we will not help you circumvent that and obtain an illicit copy of that file and violate their creative commons license.

If you do not want to pay for files, please feel free to look through the Free File Index:

Free 3D Model Index

3D printers are rapidly becoming a prop and costume builders best friend and many of the members of the 405th are extremely talented at developing high definition and accurate models for printing. This thread is an index to help both new builders find quality models and showcase the hard work of...

www.405th.com

Thanks for answering that request. We don't want to short the creators of the 3D models. Otherwise they won't make more cool stuff.

 

[Hyprfixate]

Oh man, I am still trying to figure that out. I have created a custom 3D model of the ab and all the other soft parts to 3D print them in a flexible PLA...but it is SUPER difficult. I just watched a tiktok on how another Halo guy did it with his using Foam and I think I can use the techniques he used for my flexible PLA part.

But short answer is I just have a cool airsoft undershirt that looks just OK for the ab part. I'll make a post if I ever finish the undersuit in my flexible PLA. I do have a functioning flexible PLA neck piece that people really like and tha tworks well.

I didn’t even know there was such a thing as flexible PLA lol. I was thinking of using Dragon Skin 10 fast, but the stuff expensive.