Pepakura Requests
- Thread starter nuhkschuitykaht
- Start date
- Status
Catfetus
New Member
I'm looking to commission a Mighty Morphin Power Rangers Pink Ranger helmet pepakura model. I haven't been able to find one already made for sale (or for free) online and I am also willing to pay to have this model made.
It is hard to find good reference images of the helmet, but here are some I was able to find:
Here is a close up frontal shot of someone that had a professionally cast one made:
http://images.cosplay.com/photos/28/2879969.jpg
Here is the same helmet from a little distance away:
http://images.cosplay.com/photos/28/2879968.jpg
Here is a low quality image of a few different views (not sure how helpful it will be):
http://www.mynameiskate.ca/WindowsL...Canadianwomenaretrappe_8464/pinkranger[3].png
Another professional cast helmet (I think):
http://images.cosplay.com/photos/29/2941469.jpg
http://images.cosplay.com/photos/28/2891580.jpg
http://images.cosplay.com/photos/29/2941365.jpg
I also want to add that for my purposes, I don't need the lips on the helmet made (not sure if that part is particularly difficult to model, but it could be left flat) as I am planning to make that a different way and add it on to the helmet later.
If anyone can do this for me that would be extremely helpful! I have been having a hard time finding someone to commission this from. Please contact me by either replying to this post or emailing me at shivvy at gmail dot com.
It is hard to find good reference images of the helmet, but here are some I was able to find:
Here is a close up frontal shot of someone that had a professionally cast one made:
http://images.cosplay.com/photos/28/2879969.jpg
Here is the same helmet from a little distance away:
http://images.cosplay.com/photos/28/2879968.jpg
Here is a low quality image of a few different views (not sure how helpful it will be):
http://www.mynameiskate.ca/WindowsL...Canadianwomenaretrappe_8464/pinkranger[3].png
Another professional cast helmet (I think):
http://images.cosplay.com/photos/29/2941469.jpg
http://images.cosplay.com/photos/28/2891580.jpg
http://images.cosplay.com/photos/29/2941365.jpg
I also want to add that for my purposes, I don't need the lips on the helmet made (not sure if that part is particularly difficult to model, but it could be left flat) as I am planning to make that a different way and add it on to the helmet later.
If anyone can do this for me that would be extremely helpful! I have been having a hard time finding someone to commission this from. Please contact me by either replying to this post or emailing me at shivvy at gmail dot com.
Jade Sparrow
New Member
i am also interested in this helmet. my email is timothygill@rocketmail.com
Jade Sparrow
New Member
Jason 078
Well-Known Member
Item Name
M5AC Assault Rifle, M6C Magnum Sidearm, and Spartan Laser
Item Source
Halo 3 (HALO 2 for the M6C)
Reference Images
MA5C Individual Combat Weapon System
M6C Personal Defense Weapon System
Weapon/Anti-Vehicle Model 6 Grindell/Galilean Nonlinear Rifle
Additional Info
I am looking for these three items in .obj format. Not pep file, but the straight .obj. Unfortunately, I do not have the ability to export them from the pep files that I have. I am looking for as high detail as possible.
As a secondary consideration, for the pistol and rifle, could you find a .obj file with the separate magazines? This is not a requirement, though.
Existing File Link
n/a
M5AC Assault Rifle, M6C Magnum Sidearm, and Spartan Laser
Item Source
Halo 3 (HALO 2 for the M6C)
Reference Images
MA5C Individual Combat Weapon System
M6C Personal Defense Weapon System
Weapon/Anti-Vehicle Model 6 Grindell/Galilean Nonlinear Rifle
Additional Info
I am looking for these three items in .obj format. Not pep file, but the straight .obj. Unfortunately, I do not have the ability to export them from the pep files that I have. I am looking for as high detail as possible.
As a secondary consideration, for the pistol and rifle, could you find a .obj file with the separate magazines? This is not a requirement, though.
Existing File Link
n/a
myricalboi
New Member
Item Name
Mileena Jade Kitana
Item Source
Mortal Kombat
Reference Images
Additional Info
i seen that someone on here already ready converted them into .obj files but the download link was broken.
please someone help i have been searching for like 3 days
Existing File Link
Mileena Jade Kitana
Item Source
Mortal Kombat
Reference Images
Additional Info
i seen that someone on here already ready converted them into .obj files but the download link was broken.
please someone help i have been searching for like 3 days
Existing File Link
Missing Spartan
New Member
Ok this has probably been asked before but I'm looking warhammer 40k space marine pep files. Mainly I'm looking for different chest peace files to try and fin one that looks close to a scouts armor. Any help would be great. And I already have the Astarte2 file back.
Jason 078
Well-Known Member
Because of the size of the ring, it might be a better idea to sculpt it rather than trying to pepakura it. Otherwise, you would lose so much detail and the pieces would be so small that it wouldn't be worth it.
----------
I am looking for three files in as high detail as possible with a 1/8" sliced pepakura format. I prefer sliced over straight pep for weapons as it is easier to install electronics and such (for me anyway). The three files I am looking for are the M5AC Assault Rifle, the M6C Magnum Sidearm, and the Spartan Laser from Halo 3 (Well, the M6C is from Halo 2).
MA5C Individual Combat Weapon System
M6C Personal Defense Weapon System
Weapon/Anti-Vehicle Model 6 Grindell/Galilean Nonlinear Rifle
As a secondary consideration, for the pistol and rifle, could you try to slice one to include the removable magazine? This is not a requirement, though.
nitro byrn
New Member
Could someone please model the Halo Reach Medpack?
http://www.halopedian.com/images/4/4d/Reach_health_pack.png
I don't know if this has already been made but if it has I could not find it.
http://www.halopedian.com/images/4/4d/Reach_health_pack.png
I don't know if this has already been made but if it has I could not find it.
Ghostpider
New Member
Item Name
Chaos chosen armor
Item Source
Warhammer : Age of Reckoning - MMO ; Armor of the Chaos army's "tank" class
Reference Images
http://imageshack.us/photo/my-images/845/41569.jpg/
http://imageshack.us/photo/my-images/231/chosenvwarriorpriestp.jpg/
Additional Info
Being a MMO there are diff. version for the class's armors. The chosen model would be prefered. Sadly not too many overall pictures exist.
If the model is really impossible, i could provide another set perhaps.
Helmet would be wonderful, more,if possible, would be welcomed.
I have no 3d skills, and my current location doesn't allow me to start a non-papercraft model.
Edit : i'm 180 cm tall, fit built.
Thank you very much to anyone willing.
Cheers.
-Ghostspider-
Chaos chosen armor
Item Source
Warhammer : Age of Reckoning - MMO ; Armor of the Chaos army's "tank" class
Reference Images
http://imageshack.us/photo/my-images/845/41569.jpg/
http://imageshack.us/photo/my-images/231/chosenvwarriorpriestp.jpg/
Additional Info
Being a MMO there are diff. version for the class's armors. The chosen model would be prefered. Sadly not too many overall pictures exist.
If the model is really impossible, i could provide another set perhaps.
Helmet would be wonderful, more,if possible, would be welcomed.
I have no 3d skills, and my current location doesn't allow me to start a non-papercraft model.
Edit : i'm 180 cm tall, fit built.
Thank you very much to anyone willing.
Cheers.
-Ghostspider-
Ghostpider
New Member
Good day everyone.
I posted already in the 3d model request.
I tried to look around for models from Warhammer: Age of Reckoning. Chaos side would be very prefered, Chosens,Maguses,Zealots,Marauders and such.
http://imageshack.us/photo/my-images/845/41569.jpg/ ; http://imageshack.us/photo/my-images/231/chosenvwarriorpriestp.jpg/
I'm 180 cm tall,fyi.
The model i requested on the 3d modeling thread, but i am open to any chosen models ( helmets would be a prio,if possible).
I would love to build this from scratch, but my current location it's not good for this and i'm still here for a while more ( Uni in Swiss).
Cheers.
-Ghostspider-
I posted already in the 3d model request.
I tried to look around for models from Warhammer: Age of Reckoning. Chaos side would be very prefered, Chosens,Maguses,Zealots,Marauders and such.
http://imageshack.us/photo/my-images/845/41569.jpg/ ; http://imageshack.us/photo/my-images/231/chosenvwarriorpriestp.jpg/
I'm 180 cm tall,fyi.
The model i requested on the 3d modeling thread, but i am open to any chosen models ( helmets would be a prio,if possible).
I would love to build this from scratch, but my current location it's not good for this and i'm still here for a while more ( Uni in Swiss).
Cheers.
-Ghostspider-
Game on
New Member
@myricalboi
If you don't mind spending a bit more time to get them I might have a solution for you.
On deviantArt there is a large group of people who take models and put them into a for lack of better words posing program called XNALara. Apparently though you can take the files (.mesh or mesh.acsii) and put them into blender 2.49 where they can be exported as .obj files.
What you'll need for blender to import the files:
http://www.blender.org/download/python-scripts/import-export/
And the website that leads you to all the Mortal Kombat models you could possibly ever want. lol
http://www.tombraiderforums.com/showpost.php?p=5382261&postcount=11349
It stills goes to deviantArt for the majority of them, but at least you won't have to spend eternity looking through all the different galleries. Happy hunting!
If you don't mind spending a bit more time to get them I might have a solution for you.
On deviantArt there is a large group of people who take models and put them into a for lack of better words posing program called XNALara. Apparently though you can take the files (.mesh or mesh.acsii) and put them into blender 2.49 where they can be exported as .obj files.
What you'll need for blender to import the files:
http://www.blender.org/download/python-scripts/import-export/
And the website that leads you to all the Mortal Kombat models you could possibly ever want. lol
http://www.tombraiderforums.com/showpost.php?p=5382261&postcount=11349
It stills goes to deviantArt for the majority of them, but at least you won't have to spend eternity looking through all the different galleries. Happy hunting!
NovemberAdam
Jr Member
I apologize for not using the proper format, but I am wondering if anyone has put together the Blood Dragon armour from Dragon Age? I have searched everywhere but have only found links to the Mass Effect armour, not the Dragon Age.
Thanks in advance.
Thanks in advance.
padmeskywalker54
New Member
I've been searching for awhile now with little to no luck. I'm looking for a pepakura file of Aqua's armor from Kingdom Hearts: Birth By Sleep. It doesn't have to be unfolded, though that's a plus. I would also like a file for her keyblade, Rainfell. Please and thank you!
armor
http://images.wikia.com/kingdomhearts/images/6/6d/Aqua_armor.png
keyblade
http://images.wikia.com/kingdomhearts/images/3/32/Rainfell_KHBBS.png
------
ars_sewing@yahoo.com
armor
http://images.wikia.com/kingdomhearts/images/6/6d/Aqua_armor.png
keyblade
http://images.wikia.com/kingdomhearts/images/3/32/Rainfell_KHBBS.png
------
ars_sewing@yahoo.com
CPO mendez
Active Member
Spirit of fire pep file.
i want it about one to two meters long, and as high detail as possible too. i'm willing to negotiate a commission price, just PM me if you're interested
Ref pics:
i want it about one to two meters long, and as high detail as possible too. i'm willing to negotiate a commission price, just PM me if you're interested
Ref pics:
- Status
Similar threads
