Pepakura Requests

Status
Not open for further replies.
Dead Space 2 Engineer Rig

I would appreciate having either the .pdo files or files for 3D Studio Max for the Dead Space 2 Engineer Rig.

Here are a few reference pictures
1
2
3
4

If nothing else I would love to have the helmet. I could foam the rest.
 
The Red Hood Helmet

this is what im trying to find

imgres
 
I have been looking for longest time for a decent pep file for a frigate, all the ones i have found are either too high detail to pep unless its 5-6ft long or not enough detail that it looks like a duplo lego build. any suggestions out there?
 
Dead space 2 & vanquish

Hi, im crazy looking for some pepakura models, im looking for Dead Space 2 Security suit or Advanced suit, and also the ARS from Vanquish

I already checked this forum looking for it, but the only pepakura file i found is Security suit from Nintendude (banned) from 2 years ago, and the links are dead...

Someone have the Nintendude's Security suit file?

Thanks anyway

EDIT:
Here are the photos

Security suit

http://images.wikia.com/deadspace/images/c/cb/SecurityRIG.jpg

Advanced suit

http://media.giantbomb.com/uploads/0/669/1473622-0_dead_space_2_gc_halo_jump60_rev04_05.jpg

ARS vanquish

http://i27.tinypic.com/21bvj8l.jpg
 
I have a model of the reach Mk V (I think) helmet that I just finished in blender. I am looking for someone to unfold it and would like to know how should I get it to them? (email, 4shared, something else?)
pic3.jpg
 
I have the advanced suit 3d model but i could get you pretty much any of them.
Pm me with a picture of the one you want and i will do my best to get you your rig ;)
 
Hey there 405th!

I'm looking for a halo helmet pep building from scratch, preferable HQ version but I can work with what's made. This helmet is one from the Noble 6 Concept art and also the cover from the book Cole Protocol, I believe it was going to be the MK.V but then things changed with the release of reach.

I know how much time work you guys put into what you do and its really appreciated However I am willing to compensate whoever takes this on for there time and efforts involved in the design and unfold of this. My current build is mainly based around this helmet so unless i can get it off the ground then there isn't much point to the build other than practice so i have plenty to get on with wile it is made.

This is the original concept helmet design:
noble.png


And this is the one from Cole Protocol (more towards what i was aiming for);
cole-protocol-cover-crop-336x336.jpg

Mkivtcp.jpg


I was working on the current one from Satchmo III witch is a good file, however i wanted to add allot of detail and smooth some parts out a bit more as well as change the angle of the top front slope to a bit more of a peak, the problem is i just don't have the skill or money for all the materials needed to do so and the know how of changing something so much.

If anyone is interested in taking this project on board or would like some more details please PM me I'm more than happy to hear from anyone about this and it would be great if i can get this file sorted out for my build.

With all that said you guys are great at what you do and your the ones who make these build possible for allot of us, It's really appreciated guys keep up the great work!
Many thanks, Ross
 
Just to clear some stuff up: You're asking for two different helmets. The concept art helmet IS the Mark V they just added the UA attachment and a large buckled strap around it. The other helmet is a Mark IV helmet from grey team that is the artist's rendition of the Mark IV helmet from halo wars.
 
Hey fella,
I'm not asking for two different helmets, although the fist picture shares some similar qualities that the MK.V it is not the same helmet, yes it has a UA with strap and some of the shaping is the same these are very different, The jaw construction is complete different same as the peak and it has a second sort of vent shape instead of the circular shape over the ears. I can see how it was developed into the MK.V but it isn't quite there.

And again the second helmet is not in any way similar to the Halo Wars version or at least i fail to see it if it is. If you look at allot of the detailing on the jaw of both pictures you will notice they have the same detail in the same place as well as the vents and none rounded ear parts, the over all shape is again very similar between the two of them, the main thing that changed between the two pictures is the peak and curve of the top of the helmet and the plate running between the chin peak and jaw connection.

I can understand what you saying but I have spent hours looking at these two pictures (as sad as that is) trying to work out how to restructure the Noble 6 Concept i already pep'd. I'm pretty sure they are the same helmet just one is a bit later on and has some small changes made to it, as you can imagen it would given they were never put in any of the games.

Many thanks, Ross
 
Hey there 405th!

I'm looking for a halo helmet pep building from scratch, preferable HQ version but I can work with what's made. This helmet is one from the Noble 6 Concept art and also the cover from the book Cole Protocol, I believe it was going to be the MK.V but then things changed with the release of reach.

I know how much time work you guys put into what you do and its really appreciated However I am willing to compensate whoever takes this on for there time and efforts involved in the design and unfold of this. My current build is mainly based around this helmet so unless i can get it off the ground then there isn't much point to the build other than practice so i have plenty to get on with wile it is made.

This is the original concept helmet design:
img

And this is the one from Cole Protocol (more towards what i was aiming for);
img
img

I was working on the current one from Satchmo III witch is a good file, however i wanted to add allot of detail and smooth some parts out a bit more as well as change the angle of the top front slope to a bit more of a peak, the problem is i just don't have the skill or money for all the materials needed to do so and the know how of changing something so much.

If anyone is interested in taking this project on board or would like some more details please PM me I'm more than happy to hear from anyone about this and it would be great if i can get this file sorted out for my build.

With all that said you guys are great at what you do and your the ones who make these build possible for allot of us, It's really appreciated guys keep up the great work!
Many thanks, Ross


I believe satchmo made it:
http://www.405th.com/showthread.php/32448-Model-portfolio-(Satchmo-III)
He has several noble six concept variants. Reach Concept 2, and Noble Six Concept look similar, I think that's your best bet.
 
hey , i have a request (not halo related)
could anyone make the bane mask from the dark knight rises please
 
Can anyone point me in the right direction for a pep file of Jorges Heavy machine gun? Been looking for a couple months now to no avail :(
 
Status
Not open for further replies.
Back
Top