bondandracing
New Member
Just one quick question, the files that are on page one are for which model? Thank you
Tutorial: How to use Pepakura to make your Mjolnir Armor
- Thread starter Frizzlefry
- Start date
- Status
Ral Partha
Sr Member
JediFraz's Halo 3 armor.bondandracing said:
Last edited by a moderator:
bondandracing
New Member
does anyone have any finished pictures of the armor, i just want an idea of how to make it look. and which helmet model is this as in Mark V, Mark VI. Thank you
maximozzle
New Member
Thanks for the great tutorial, was easy to follow and hopefully easy to start, (getting myself some cardstock today 
) hope to see you guys through a visor soon
) hope to see you guys through a visor soon 
Patrick Smith
New Member
Wow, thanks for all the work and time you've put in making this. It's going to very helpful in the future.
I am one those who have a mac. Is there an application for Mac OS X that would do what Pepakura does? Or at least something similar?
I am one those who have a mac. Is there an application for Mac OS X that would do what Pepakura does? Or at least something similar?
charlie tuna
Member
Not that I know of, I haven't found and Mac programs that will read a pdo file. If you have a PPC based Mac, try looking up Virtual PC on ebay, but make sure you get one with windows XP Home with it, that's what I have on my G4 powerbook and have been able to run windows progs that way.Infrantry-Spartan said:
Last edited by a moderator:
You know...I didn't know were to begin, I stumbled onto the site looking for other types of Sci-Fi armor...but this alone has made me want to create a set of armor.
This has to be one of the best Online Prop/Costuming sites I've ever seen..hands down one of the best ones..if not the best ones out there!
Thanks for taking the time to put this together...is going to be a great help...my biggest issue now is going to be Resizing...as I'm not a small guy.
This has to be one of the best Online Prop/Costuming sites I've ever seen..hands down one of the best ones..if not the best ones out there!
Thanks for taking the time to put this together...is going to be a great help...my biggest issue now is going to be Resizing...as I'm not a small guy.
Dreadnought
Well-Known Member
QballFI said:
Welcome to the 405th
NOW GET TO WORK!
-Harrison
Last edited by a moderator:
VengeanceRealized
New Member
Hey there guys,
I used the files on here and let me tell you... I'M SO EXCITED!!! Good job on the files Frizzlefry!!
I chose to go the cardboard route. I felt it would give it more strength and structure and minimize warping when resining. I have all the pieces of the suit made and I just need to resin them. Here are some pics:
The whole suit
The HELMET!!
The chest and biceps
The mid section
The lower section
Me wearing it for the first time!!
Back
So just a few things:
1. This armor is HUGE! Please scale it. I'm 6'7" and its big on me.
2. This armor is HOT temp wise, so if you're planning on wearing it on Halloween, please pace yourself when you drink (i.e. drinking in a hot tub or on the beach)
3. When you build with cardboard, you don't need the tabs, so just cut them off and hot glue the INSIDE joints together (I made the mistake of filling in the outside helmet joints with hot glue and it melts when you sand it)
4. I'm going to use Bondo body filler to fill in the joints and then resin the whole piece (veterans please tell me if this is cool)
That's pretty much it so far, more progress pics to come!
Let me know what you guys think!
The chest looks a little small (narrow across my body), info please!
Thanks
- VengeanceRealized
p.s. if this is in the wrong place please move or lock
I used the files on here and let me tell you... I'M SO EXCITED!!! Good job on the files Frizzlefry!!
I chose to go the cardboard route. I felt it would give it more strength and structure and minimize warping when resining. I have all the pieces of the suit made and I just need to resin them. Here are some pics:
The whole suit
The HELMET!!
The chest and biceps
The mid section
The lower section
Me wearing it for the first time!!
Back
So just a few things:
1. This armor is HUGE! Please scale it. I'm 6'7" and its big on me.
2. This armor is HOT temp wise, so if you're planning on wearing it on Halloween, please pace yourself when you drink (i.e. drinking in a hot tub or on the beach)
3. When you build with cardboard, you don't need the tabs, so just cut them off and hot glue the INSIDE joints together (I made the mistake of filling in the outside helmet joints with hot glue and it melts when you sand it)
4. I'm going to use Bondo body filler to fill in the joints and then resin the whole piece (veterans please tell me if this is cool)
That's pretty much it so far, more progress pics to come!
Let me know what you guys think!
The chest looks a little small (narrow across my body), info please!
Thanks
- VengeanceRealized
p.s. if this is in the wrong place please move or lock
SmileyFace69
New Member
okay i got the program + the files, and i dont get what u do after there printed?
how do u know what to do ?
how do u know what to do ?
Ral Partha
Sr Member
Read the very first post of this thread. You might as well the rest of the thread and the other stickies, too.SmileyFace69 said:
Last edited by a moderator:
swampbilly
Active Member
hey just a neat little tip: after you have completed your pep piece try giving it light from the inside...it really shows definition and lets you see imperfection that you can note later when fiberglassing and filling with bondo. this image shows my tip.
InfiniTTTy
Active Member
Ha HA! Nice! I want a "Chief's Head" lamp too!
Just be careful about how long it stays there... the heat of the bulb could bring trouble.
Just be careful about how long it stays there... the heat of the bulb could bring trouble.
swampbilly
Active Member
InfiniTTTy said:Ha HA! Nice! I want a "Chief's Head" lamp too!
Just be careful about how long it stays there... the heat of the bulb could bring trouble.
thank youo! i forgot to mention that. it wouldnt be pretty. and you are the second person that said "hey! a masterchief lamp i want one!" lol
Last edited by a moderator:
wingstealer
New Member
ok i relise the tut but i cant figure this out i veiw and i did all the nessesary steps to print but when i print there is no lines just the numbers and i cant figure it out
swampbilly
Active Member
wingstealer said:
where did you d/l your pdo file from? who is it by?
Last edited by a moderator:
SpartanIII 0324
New Member
yea so i was making my armor from pep and it was all going well til i started adding foam so it would fit to my body. It was all fine yesterday, today i went to go check on it and the foam shrank and ruined my armor completely so i need to start from square one. i am not going to bother with making it out of pep now, i think i might do it out of foam coated in resin.
- Status
Similar threads
