I own a machine called a "carvewright" and they just released an application that allows me to pull a 3D file (.stl format) in and slice it up into 3/4" sections and carve it...so I found a 3D Halo pistol by "Birdman" on google's 3d warehouse and carved it up....This machine rocks. I'm looking for a decent 3d model of the assault rifle now to do it!\
one of the images shows the pistol sliced into two halves...each carved and held in place with "tabs" I placed in the application. All I had to do was cut it out and sand off the tabs. I used a pretty weak pine, so a few of the details blew out in the carving. I'm going to do it again on a higher quality setting and see if I can retain more of the details.
one of the images shows the pistol sliced into two halves...each carved and held in place with "tabs" I placed in the application. All I had to do was cut it out and sand off the tabs. I used a pretty weak pine, so a few of the details blew out in the carving. I'm going to do it again on a higher quality setting and see if I can retain more of the details.