A1TD : Gears Of War 3. Re-opened.

[ACDCrockr209]

I should have a Sectioned Retro Lancer progress pic in a bit

That should give you guys a bit of what the final model will look like. I should get it done sometime tomorrow and unfold it in the next couple of days.

 

[bigjohn9397]

hey people, now i come here to troll everyone
kidding
bigjohn9397 do u understand about what fail about u cut do u do?
type, the face part, and neck part. this is a fail part.

I only cut the bottom hole on the helmet where the head would fit in. Thats is, you repaired it though.

 

[koshima07]

I should have a Sectioned Retro Lancer progress pic in a bit

That should give you guys a bit of what the final model will look like. I should get it done sometime tomorrow and unfold it in the next couple of days.

Looking nice, Pony!
I started working on the Lancer, and I've been looking at alot of references. But i keep finding that some chainsaw bayonets are recessed, while others are protruding.

That gave me the idea to make the chainsaw bayonet a separate piece, that when you prepare to saw somebody, you just unlock the handle and push it forward, pushing the chainsaw bayonet forward as well.

Not a bad idea, right?

Also cleaned up some parts where they were just separate blocks, but now they are part of the body!

"YAYS"

Going to continue working on it today, and I may go and DL the beta so I can assist on finding files.
Gaaramasa and BigJohn, I would totally appreciate advice on what tools I will be needing to get the job done.

Thank's guys!

 

[MissMeowsikins]

Just a heads up for anyone making the Anya chest, I added a few extra centimetres to my measurements to allow for padding but even with the extra it's too small! So if you're going to make it add a good 10cm to make sure it fits Or it's just that my chest is too big :/

 

[MissMeowsikins]

GODDAMMIT! I always make the pep files too early! The new retro lancer looks awesome! I built the one without the bayonet and am now trying to find a way to attach a bayonet. Anyone got any ideas? :/

 

[gaaramasa]

Just a heads up for anyone making the Anya chest, I added a few extra centimetres to my measurements to allow for padding but even with the extra it's too small! So if you're going to make it add a good 10cm to make sure it fits Or it's just that my chest is too big :/

i dont know if i be happy or not SUAHDUAHSD, but, why do use something to hold?can push a little, I have a friend who felt problems, but
Always wear a bra the silicone cosplay, just have to be fine, until pq
in the end, after the fiberglass, you cut and puts the screws in 2 weeks
I post my news, with details ^ ^

 

[gaaramasa]

GODDAMMIT! I always make the pep files too early! The new retro lancer looks awesome! I built the one without the bayonet and am now trying to find a way to attach a bayonet. Anyone got any ideas? :/

just baioneta?(baioneta is knife right?) if yes, its easy, we can add, just do glue in end

 

[koshima07]

just baioneta?(baioneta is knife right?) if yes, its easy, we can add, just do glue in end

Gaaramasa's right. The Bayonet was separated from the model, so all you have to do is attach it after your build. Try not to double-post, guys. There's the edit post button, remember?

Hey, Gaaramasa:
What's the best way to DL the game?

And it turns out a site has a link for the DL for GOW2 for PC. Something seems fishy there.

 

[gaaramasa]

today in night i will post 'add' for retrolance baioneta, i have study and class in university now
we see more later =p
bye

 

[koshima07]

Ok, I'm currently DL-ing the G3DE, and that's code, so I hope not to get into trouble, if any.
What tools might I need to extract certain models and textures (for HD-ness) and how do I get from the DL stage to the Locating Stage?

 

[ACDCrockr209]

Should have another progress pic for the Sectioned Retro Lancer sometime today.

 

[koshima07]

Should have another progress pic for the Sectioned Retro Lancer sometime today.

Epic! Working on the Lancer as we speak!

 

[bigjohn9397]

Ok, I'm currently DL-ing the G3DE, and that's code, so I hope not to get into trouble, if any.
What tools might I need to extract certain models and textures (for HD-ness) and how do I get from the DL stage to the Locating Stage?

Hey, when you find out how to get the models, can you shoot me a pm with the info? Then we can have 3 people working on them.

 

[koshima07]

Hey, when you find out how to get the models, can you shoot me a pm with the info? Then we can have 3 people working on them.

That's what I'm trying to figure out right now, lol.

(want's snub)

But thankfully, the DL is almost done. Had to torrent DL because most of the on-site links I saw weren't operational.

EDIT:
Ok, so 40% isn't "almost-done" to others like it is to me, but it's going smoothly for now.
How do I open the ".r(##) files? the (##) means numbers like .r00 and so on.

 

[bigjohn9397]

EDIT:
Ok, so 40% isn't "almost-done" to others like it is to me, but it's going smoothly for now.
How do I open the ".r(##) files? the (##) means numbers like .r00 and so on.

You have to unrar the .rar and .r## files at the same time, I recommend using winrar.

 

[koshima07]

You have to unrar the .rar and .r## files at the same time, I recommend using winrar.

So the .r00 files are basically numbered .rar files? Nice. What about the .par2?

Alright!!! 79% and counting! Thank you BitTorrent!!!
Now that I've opened .r09, I've located the character files. But no G2 Dom... or G2 Cole... will keep searching!

Also, it appears that the files are labeled ".xxx" which I believe to be a place-holder title and not a porno file (whatever those may be...i don't know, let alone want to find out.) So what's the best way to extract these files? Name them obj? It's harder to think about it for now...

 

[bigjohn9397]

the .xxx file is used with Unreal Engine 3 so in other words, open with UDK. Which if you don't have its a free download from udk.com. after you open/imprt them into UDK then you export the file into a different file type. If you could, for right now at least, export them into either .obj, or .3ds

 

[koshima07]

the .xxx file is used with Unreal Engine 3 so in other words, open with UDK. Which if you don't have its a free download from udk.com

DLing it now.
BT should be done... nope. 81%. But almost there!

Still searching.

And what do I do from there, once UDK is installed and all biscuits and gravy?

 

[gaaramasa]

hmm... the models, to find texture u have do use umodel gui, because just umodel viewer, dont can extract,
my time its short..so mpch(i thinks is that), is the chars of gears, and SF something like this, is a another thinks, gears start, geargame
gear( i dont remember now xD) and always export to .obj to import model for texture, and edit
export to .3ds ( sketchup - i use this).

koshima07
can u create a group in messenger, for we talk about this? if u do it this, we dont have do talk so much.
i always stay online

 

[koshima07]

hmm... the models, to find texture u have do use umodel gui, because just umodel viewer, dont can extract,
my time its short..so mpch(i thinks is that), is the chars of gears, and SF something like this, is a another thinks, gears start, geargame
gear( i dont remember now xD) and always export to .obj to import model for texture, and edit
export to .3ds ( sketchup - i use this).

and how can you extract the model?