First build: Thom A293 based concept armor
- Thread starter Thom A293
- Start date
- Status
Thom A293
Active Member
Prrrrrrrogress update! Finally with my internet back and some sunshine I can show you guys a little bit of progress. All the pieces have almost all the pieces are sealed and ready to go. The Chest, a thigh, and a shin are all that's left in this faze. I have the base metal color on a lot of the pieces and today tried putting the base colors onto a few of these pieces. With my minty toothpaste I dabbed the pieces up where I wanted the paint to be warn off and sprayed on two-three laters. I actually just finished wetsanding the hands and one of the boots and I am quite happy with how they turned out 
. Its just the base coat so I still need to paint brush on the rest of the colors. I might tape off some things and spray them, but a few pieces will be tricky if done like this so painting by hand and them wetsanding again will do just fine. Still a lot of painting to go, but they are starting to take shape:
Here are the boots side by side, one has been wetsanded and the other has not.
Other than that, I met up with the amazeballs mblackwell1002 again and got my armor ability module. The front and back separate so that you can wire the module with lights. A light sanding and it will be ready to paint. I also got my visor from stonyprops on etsy and I cant wait to have the helmet done and it installed.
. Its just the base coat so I still need to paint brush on the rest of the colors. I might tape off some things and spray them, but a few pieces will be tricky if done like this so painting by hand and them wetsanding again will do just fine. Still a lot of painting to go, but they are starting to take shape:Here are the boots side by side, one has been wetsanded and the other has not.
Other than that, I met up with the amazeballs mblackwell1002 again and got my armor ability module. The front and back separate so that you can wire the module with lights. A light sanding and it will be ready to paint. I also got my visor from stonyprops on etsy and I cant wait to have the helmet done and it installed.
StayFrosty
Jr Member
Haha every time that I come back on to the 405th after a few weeks you've made great progress! I really do need to get back on the forums though...
SI3RRA 117
Well-Known Member
- Member DIN
- S240
Looking great. Just curious what it is exactly your wet sanding? Is the plastidip texture or just sanding to weather it? Can't wait to see the armor ability all lit up!
Thom A293
Active Member
Thanks man, and yes, you need to get back on the forums. Progress is slower than I would of wanted, but progress is still progress.
So after every bit of painting or sealing I have been wet Sanding the entire piece. My first wetsanding was after the Mod podge and kwik. The second was after the metal color and then the third was after this base color. My hope is only one more wetsanding per piece cause so far I'm doing a lot of wetsanding. Let ke just say though that it's heavilyworth it. I did a few more pieces and they are immensly smooth, no paint feel what so ever which vastly helps with the armor illusion.
So I only had the shoulder and helmet in plasti, after that I switched to my own process cause I didn't like how it was (mod, kwik, mod, wetsand). Yeah, if I am a bit rougher it greatly helps with the weathering, but at this point it was mainly for getting off the toothpaste which really stuck on there.
StayFrosty
Jr Member
Haha don't even talk to me about slow progress! I keep saying that I'm going to finish my non-halo project soon, but it's taking forever, and stopping me from starting other projects. I really need to buckle down and get it done!
SPARTAN1803
Active Member
This is looking spectacular man!!!
Thom A293
Active Member
Small update, so I finished sealing the rest of the pieces and sprayed on up to the metal coat (except the chest). The rest of the pieces I had that needed to have the toothpaste wetsanded off were completed and they look quite fancy. There is still a bit of toothpaste residue that seams to keep appearing on the parts, but I'll just do another quick clean and they will be fine.
Getting close to being able to full paint the suit I went back to the drawing table and took another look at the paint scheme I had for the suit. I actually really liked how the grey turned out on my forearms and boots so I wanted to incorporate that more into the suit, I also added a dark grey to replace the black I thought was a lot of the details on the suit when it wasn't.
I was thinking and thought I showed you guys the finished pistol but looked back and saw I didn't. Soooooo, here is the complete pistol. It has a total of about half a million vertices and I already split it apart for printing. I was going to have the long barrel and stock and such, but as I got further into the stock it was looking less like the m6. Plus the long barrel was hindering on the look since the socoms front attachment is a suppressor, so I cant go barrel, suppressor, and then back to barrel.. I tried extending the suppressor but that's when it looked bad in my opinion. To save me from all of that and keep it about the size of a sidearm and not a carbine, I just kept it as the pistol.
One more thing guys and galls....
Don't look now, but if you go to the 405th home, you will see that there are robots online. There number was a little high so be careful and keep that m6 on your side ready... just in case they try anything fishy.
Getting close to being able to full paint the suit I went back to the drawing table and took another look at the paint scheme I had for the suit. I actually really liked how the grey turned out on my forearms and boots so I wanted to incorporate that more into the suit, I also added a dark grey to replace the black I thought was a lot of the details on the suit when it wasn't.
I was thinking and thought I showed you guys the finished pistol but looked back and saw I didn't. Soooooo, here is the complete pistol. It has a total of about half a million vertices and I already split it apart for printing. I was going to have the long barrel and stock and such, but as I got further into the stock it was looking less like the m6. Plus the long barrel was hindering on the look since the socoms front attachment is a suppressor, so I cant go barrel, suppressor, and then back to barrel.. I tried extending the suppressor but that's when it looked bad in my opinion. To save me from all of that and keep it about the size of a sidearm and not a carbine, I just kept it as the pistol.
One more thing guys and galls....
Don't look now, but if you go to the 405th home, you will see that there are robots online. There number was a little high so be careful and keep that m6 on your side ready... just in case they try anything fishy.
CaminusPrime
Active Member
This build is looking Amazing!
Electraknite
Active Member
neodymium rare earth magnets is the technical name
Last edited:
PerniciousDuke
Sr Member
- Member DIN
- S128
There are different grades of rare earth magnets which indicate their strength. Here is a calculator so that you will know if the magnets you are buying are strong enough. I wouldn't recommend buying them off this site because they are much cheaper through ebay.
K&J Magnetics - Magnet Calculator
K&J Magnetics - Magnet Calculator
Thom A293
Active Member
I have not forgotten!
The suit has been a slow pace but it is still moving. Right now it has mainly been a lot of painting and painting on the suit. All the pieces are quite close except the chestpiece and the helmet, both of those are mainly a solid green.
Previously I had been talking about how I had been using toothpaste as my paint coverer and was praising it. Yes, it created a result that looked quite good, but it was a pain to clean up and take off... I then tried Vaseline and low and behold it created a better result and came off super easy... Why I hadn't been using that before I don't know, but in short don't use toothpaste, use Vaseline.
Not relative to my suit but still halo cosplay, my friend got two molded helmets that he wanted me to fix up and primer. I was super jealous cause the noble 6 was a regular $130 I think, but the original mark he got for $10. Anyway, they were quite fun to do the touch up work on, removing the seams and such. I cant rn but ill post pics of those two helmets later.
What I will do to keep hopefully more posts going is each armor part I "finish" with the basic painting I will post some pictures of it.
The suit has been a slow pace but it is still moving. Right now it has mainly been a lot of painting and painting on the suit. All the pieces are quite close except the chestpiece and the helmet, both of those are mainly a solid green.
Previously I had been talking about how I had been using toothpaste as my paint coverer and was praising it. Yes, it created a result that looked quite good, but it was a pain to clean up and take off... I then tried Vaseline and low and behold it created a better result and came off super easy
... Why I hadn't been using that before I don't know, but in short don't use toothpaste, use Vaseline.Not relative to my suit but still halo cosplay, my friend got two molded helmets that he wanted me to fix up and primer. I was super jealous cause the noble 6 was a regular $130 I think, but the original mark he got for $10. Anyway, they were quite fun to do the touch up work on, removing the seams and such. I cant rn but ill post pics of those two helmets later.
What I will do to keep hopefully more posts going is each armor part I "finish" with the basic painting I will post some pictures of it.
SI3RRA 117
Well-Known Member
- Member DIN
- S240
Once everything is painted are you going to give it all a black wash? It's going to really bring out the detail you have built into all of the armor.
Thom A293
Active Member
Yeah lol, it did take a while. Once I get the magnets for the chest I will do a suit up for ya guys. Can't do a suit up if the chest piece won't stay.took ya' long enough.
Looks sick man! And show us a premature suit-up!
Yes, my plan is to do a black wash with a few other weathering colors on the armor. There is quite a bit of painting I still got to finish beforehand though.
- Status
