First build WIP - Halo 4 Recon Helmet / Halo 4 Mark VI Armor

Status
Not open for further replies.
Truckin along with a heck of a torso piece to go with that helmet! It always amazes me how a piece can look so different through each phase of the creation process. Yours is looking so pristine after that primer, it'd hard for many to see how much work went into getting it so smooth and sharp. I am so excited to see this go through its many stages and end up at the same level as your helmet.

Congratulations on the Waypoint post; you definitely deserve it!! ^__^

Thanks a ton! I really appreciate the reply. Stuff like this helps keep you going on a long build.
 
Progress from today:

Goal was to shape the front top horseshoe detail pieces. I started at 8am and stopped at 4:30pm, long day. I got the pieces shaped and realized the left shoulder sat too low and didn't look good matching up to the detail piece like the right shoulder so I measured them up and sure enough the left was slightly misaligned. Straight forward enough fix was to add roughly 5mm to the top of the left shoulder.

10787057773_6208fce39f_b_d.jpg


10786923444_6bfa0af0c0_b_d.jpg
 

Attachments

  • 10787057773_6208fce39f_b_d.jpg
    10787057773_6208fce39f_b_d.jpg
    211.2 KB · Views: 233
  • 10786923444_6bfa0af0c0_b_d.jpg
    10786923444_6bfa0af0c0_b_d.jpg
    429.1 KB · Views: 210
I apologize for the double post tonight but I really wanted to get this pic up. I had dinner tonight then decided I couldn't end the weekend with spot putty on the torso. I sanded like crazy and sprayed on a layer of primer.

10790679644_153e8f93e3_b_d.jpg
 

Attachments

  • 10790679644_153e8f93e3_b_d.jpg
    10790679644_153e8f93e3_b_d.jpg
    333.1 KB · Views: 240
Came home from work and added the thruster pack details, really happy with how it's turning out :)

10808280474_b2f6a0af3d_b_d.jpg


10808282264_641e7889bc_b_d.jpg
 

Attachments

  • 10808282264_641e7889bc_b_d.jpg
    10808282264_641e7889bc_b_d.jpg
    223 KB · Views: 246
  • 10808280474_b2f6a0af3d_b_d.jpg
    10808280474_b2f6a0af3d_b_d.jpg
    354.1 KB · Views: 214
amazing work man. I am going to have to build a suit out of pep and fiberglass at some point. Very impressive!
 
wow

Came home from work and added the thruster pack details, really happy with how it's turning out :)

10808280474_b2f6a0af3d_b_d.jpg


10808282264_641e7889bc_b_d.jpg

wow your work i amazing you doing great man
 

Attachments

  • 10808282264_641e7889bc_b_d.jpg
    10808282264_641e7889bc_b_d.jpg
    223 KB · Views: 235
  • 10808280474_b2f6a0af3d_b_d.jpg
    10808280474_b2f6a0af3d_b_d.jpg
    354.1 KB · Views: 217
man are you still working on the armour

Thanks for your previous reply, and yup I'm still working on it but with my day job I can't complete much during the week currently; So I usually make my big progress on the weekends. Keep checking back I'll have more for ya soon.
 
I'm jumping on board a little late as far as seeing this build in the process, but I am really awed. The chest looks amazing so far and the helmet as well. I don't know if this was already asked/mentioned, but where did you get that visor?
 
Such great attention to detail! :D I can't wait to see more progress.
Thanks, more progress on its way all the time ;)

I'm jumping on board a little late as far as seeing this build in the process, but I am really awed. The chest looks amazing so far and the helmet as well. I don't know if this was already asked/mentioned, but where did you get that visor?

Thanks a lot! You use any visor you wish and then use this stencil to get the hex pattern. http://www.shop.deltaarts.pl/index.php?main_page=product_info&products_id=403

Weekend of Nov. 16/17 20130 update:
So I've made it to the final detailing/ smoothing phase, I started with the rear section of the torso this weekend. Below you can see my progress so far. I hope to be able to pour some hours into it this week after I get home from work each day and by the end of next weekend start painting!!

10913684726_eb8abcea13_b_d.jpg


10913647065_16fecfe322_b_d.jpg
 

Attachments

  • 10913647065_16fecfe322_b_d.jpg
    10913647065_16fecfe322_b_d.jpg
    450.1 KB · Views: 222
  • 10913684726_eb8abcea13_b_d.jpg
    10913684726_eb8abcea13_b_d.jpg
    184.9 KB · Views: 209
^Thanks again guys.

.............................................................
WARNING - EYES ONLY TOP SECRET / ONI.SEC.PRTCL.1A / ENCRYPTION CODE GAMMA

/Begin transmission
/Transmitting via ONI sloop secure link.
//Package is almost ready, a couple more days and the titanium alloy outer shell will be ready to move onto the paint process. We are so close now. 1 file(s) attached.
/Transmission terminated

10955876604_2d6b5150de_b_d.jpg
 

Attachments

  • 10955876604_2d6b5150de_b_d.jpg
    10955876604_2d6b5150de_b_d.jpg
    151.5 KB · Views: 202
Wow!!!
It's spectacular, is doing an amazing job, I can not wait to see the pictures of the painting!!
 
^Thanks again guys.

.............................................................
WARNING - EYES ONLY TOP SECRET / ONI.SEC.PRTCL.1A / ENCRYPTION CODE GAMMA

/Begin transmission
/Transmitting via ONI sloop secure link.
//Package is almost ready, a couple more days and the titanium alloy outer shell will be ready to move onto the paint process. We are so close now. 1 file(s) attached.
/Transmission terminated

10955876604_2d6b5150de_b_d.jpg

Dear god... this is breath taking work here. What I would do for such quality...
 

Attachments

  • 10955876604_2d6b5150de_b_d.jpg
    10955876604_2d6b5150de_b_d.jpg
    151.5 KB · Views: 243
This is a great chest piece! I had not explored the rest of the thread yet, but your work is amazing...
 
Thanks again everyone.

You can see my paint progress on the torso below. I started off with a gloss black base then wet sanded it to 1500 grit. Next I did 3 different shades of the "bare metal paint" (dark to light). I'm sticking to the same paint process I used on the helmet for the most part except I only sanded the helmet to 600 grit.

11015025824_747916ecec_b_d.jpg


11015268346_15128f6bc4_b_d.jpg
 

Attachments

  • 11015025824_747916ecec_b_d.jpg
    11015025824_747916ecec_b_d.jpg
    539.7 KB · Views: 211
  • 11015268346_15128f6bc4_b_d.jpg
    11015268346_15128f6bc4_b_d.jpg
    360.9 KB · Views: 292
Status
Not open for further replies.
Back
Top