Updating for the HAZMAT Core armor from Halo Infinite: Halo Infinite HAZMAT Core Suit by moesizzlac - Thingiverse
Free 3D Model Index
- Thread starter TurboCharizard
- Start date
Unfit Armory
Member
- Member DIN
- S628
Halo Infinite MA5 Evolved
One of the newest models for the AR, I have it a shot and came out with something pretty damn good, in only 4 days!
files include a cut version with pvc holes, .75. Inch outer diameter.
Changes to the model may occur in the future.
Files
Print test:
Credit: Kahn 319
One of my references:
One of the newest models for the AR, I have it a shot and came out with something pretty damn good, in only 4 days!
files include a cut version with pvc holes, .75. Inch outer diameter.
Changes to the model may occur in the future.
Print test:
Credit: Kahn 319
One of my references:
Unfit Armory
Member
- Member DIN
- S628
Dude you are dropping these like bombs, keep it up!!!
CorgiAhn
New Member
This is amazing!!! Can't wait to print these out.
Updating for Reach Operator Helmet with and w/o B5D0 Optics: Halo Reach - Operator Helmet with and w/o B5D0 Optics by moesizzlac - Thingiverse
today was also a slow day at the office, noble team helmet base
www.printables.com
Noble Team Helmet Stand by ODCA Props | Download free STL model | Printables.com
"The Covenant are on Reach, its the winter contingency" helmet base inspired by noble team's emblem | Download free 3D printable STL models
www.printables.com
- Member DIN
- S149
Hi there! Unfortunately that'd be a no; since the Mark IV kit just came out no one has made the files for it just yet. If you give it probably a month or two, we likely will start seeing Infinite Mark IV files coming out of the woodwork. Patience is key with new stuff my friend, I know it likely wasn't what you wanted to hear, but that's the unfortunate reality! Hope this helps!
Rhaptyr
New Member
Oh, sorry. Still not sure how it all works
Updating for Halo Infinite Stalker Rifle. May I never need to touch this guy again.
www.thingiverse.com
Halo Infinite - Stalker Rifle by moesizzlac
Update 3/16/24 - I forgot to add a channel to MoeSizzlac - Halo Infinite - Stalker Rifle - Front - MiddleHere is the Halo Infinite Stalker Rifle. There are 2 versions of this Rifle. One where I made all the holes about 3% bigger and another in the zip file where a perfectly tune machine has...
www.thingiverse.com
Qivro
New Member
Beautiful work as always Moe.Updating for Halo Infinite Stalker Rifle. May I never need to touch this guy again.
Halo Infinite - Stalker Rifle by moesizzlac
Update 3/16/24 - I forgot to add a channel to MoeSizzlac - Halo Infinite - Stalker Rifle - Front - MiddleHere is the Halo Infinite Stalker Rifle. There are 2 versions of this Rifle. One where I made all the holes about 3% bigger and another in the zip file where a perfectly tune machine has...
View attachment 342296View attachment 342297View attachment 342298
tahu505
Sr Member
- Member DIN
- S505
You're all good, no need to apologize for asking questions! Just to expand on what Sigma said, it can take a while because 3d modeling can be a long process and relatively not many people do it. The few people who do 3d model tend to do it for fun/independant work in between school/regular work, which also adds to the time for new models to be made.
But with how popular Mark IV is, it is likely that the infinite version will be made by someone. I haven't looked too closely at the armor in game compared to existing files, but if the base armor for the Mark IV core is the same as existing files, you could use existing files and see if new files come out for the new attachments/helmets added to Infinite.
Also if there's any specific 3d model you want made, you can always put a request in this thread and someone might voluntarily make it!
ThreeEvening158
Jr Member
Great work Moe! I'm using your files for my Reach CQC build, though scaling them is proving to be... fun? I'm 6'2" and around 165 pounds, but I'm working through it. Thanks for your contributions to the community!Updating for Halo Infinite Stalker Rifle. May I never need to touch this guy again.
Halo Infinite - Stalker Rifle by moesizzlac
Update 3/16/24 - I forgot to add a channel to MoeSizzlac - Halo Infinite - Stalker Rifle - Front - MiddleHere is the Halo Infinite Stalker Rifle. There are 2 versions of this Rifle. One where I made all the holes about 3% bigger and another in the zip file where a perfectly tune machine has...
View attachment 342296View attachment 342297View attachment 342298
ThreeEvening158
Jr Member
Sorry to bother anyone, but is there a chance we could get printable CQC shoulders for the Reach Mk. V? I know there's some .obj files on the site, but I have no idea what the correct scaling is, and the size when imported into a 3D modeling software was about 12 millimeters long.
Last edited:
- Member DIN
- S018
Typically when software exports a model and it's not the correct scale, it's off by some factor of 10 (like 10, 100, 1000 times bigger or smaller). But ideally you'd be scaling armour to fit yourself anyway so the default scale isn't a huge deal.
Womanrepelnt
New Member
Does anyone know where I could find the Halo ODST helmet accessories?
Last edited:
PrintMasterJay
New Member
Big thank you to CarterBuilder12 and everyone who posts to this thread. Been working on this on and off over the past few months and wanted to share.
Cut it into 4 sections, added holes for a dowel rod, came out better than I'd hoped.
Attachments
Here's the Halo Reach CQC Shoulder scaled to the smaller size one. Print it at about 130% for the larger sized one. I'll let you figure out which way is up
ThreeEvening158
Jr Member
Thank you! I'm currently brainstorming ideas for how to swap shoulders, I'm trying to get that full Reach experience into my build (constantly changing the parts because I feel like it.) Great work and we appreciate you!Here's the Halo Reach CQC Shoulder scaled to the smaller size one. Print it at about 130% for the larger sized one. I'll let you figure out which way is up
View attachment 344314
Similar threads
