Macattack64
Well-Known Member
I can't wait to see your full hayabusa done. I'm gonna be watching this thread from now on. Good luck. 
Halogoddess's Hayabusa Build
- Thread starter HaloGoddess
- Start date
- Status
yeh your suit is goin absolutly awesome and the chest piece looks like it fit i had an issue with mine because from the time i had between pepping and resining it i got well "larger" so i had to cut mine up and add 3 inches at the bottom and 1 at the top is was a shame but now it fits awesome here ill show u a pic with mine
you wont rewally notic after its all bondoed over but like ithica said its only a reference model of a chracter so there will most likely have to be adjustments but hey yours seem to fit really awesome
you wont rewally notic after its all bondoed over but like ithica said its only a reference model of a chracter so there will most likely have to be adjustments but hey yours seem to fit really awesome
KUNG FOO OYSTER
New Member
Hey, new to the forums, and checked out your thread before.
That hayabusa is looking pretty cool
I'll drop by periodically and check it out, great pepping by the way.
I haven't started my halo project, but that'll come after halloweenmaybe for next years
keep it up
-KFO
That hayabusa is looking pretty cool
I'll drop by periodically and check it out, great pepping by the way.
I haven't started my halo project, but that'll come after halloween
maybe for next yearskeep it up
-KFO
HaloGoddess
Well-Known Member
I am definately pacing myself on this. Especially since I don't need it until May AND it's too cold to do any resin.
Well, here are some thigh pieces. At first, I wasn't going to include the inner thigh parts so I didn't print those out the first time. Then I changed my mind then printed out those pieces to put in for the inner thigh. I WAS thinking about doing something different, but had a change of plans. I was just going to try and do it so that the thigh pieces were comfortable. After I fiberglass them, I will see if they feel comfortable, if not, then I will just cut those pieces out and do what I originally planned.
I am 5'4" and these were scaled at 13 inches high (330 mm).
The torso is STILL NOT 100% finished. I still have to complete the back, but I hate all those tiny little pieces I have to pep for the detail so I am looking at another way to complete that since I HATE cutting out all those tiny pieces! XD
Well, here are some thigh pieces. At first, I wasn't going to include the inner thigh parts so I didn't print those out the first time. Then I changed my mind then printed out those pieces to put in for the inner thigh. I WAS thinking about doing something different, but had a change of plans. I was just going to try and do it so that the thigh pieces were comfortable. After I fiberglass them, I will see if they feel comfortable, if not, then I will just cut those pieces out and do what I originally planned.
I am 5'4" and these were scaled at 13 inches high (330 mm).
The torso is STILL NOT 100% finished. I still have to complete the back, but I hate all those tiny little pieces I have to pep for the detail so I am looking at another way to complete that since I HATE cutting out all those tiny pieces! XD
Macattack64
Well-Known Member
Yea, I agree. That's why I didn't make my handplates and I'm buying some.. lol
TyrDropProps
Member
If the thighs do turn out too uncomfortable, just use the inner piece as a basic template for some thin foam bits, just overlap each row and you should be fine.
HaloGoddess
Well-Known Member
Wtfmfkr said:
That is sort of what I had in mind. I was going to find a different tpe of fabric though as I am custom sewing the whole under armor piece and I want it all to match very well.
Last edited by a moderator:
TyrDropProps
Member
HaloGoddess said:That is sort of what I had in mind. I was going to find a different tpe of fabric though as I am custom sewing the whole under armor piece and I want it all to match very well.
Oh, well just use the fabric sewn over the foam like custom car interior folks do it and you'll have a flexible and clean lookin' inner thigh.
Last edited by a moderator:
HaloGoddess
Well-Known Member
The belt piece is actually a female version. The guy that created this (balmung of the azure sky or something other), did not have it unfolded and since I recently learned how to unfold, I gave it a shot and tried my best to unfold this so that I could actually put it together. I think I did a good job, but unfortunately, I could not save it.
So now it's all put together and I wanted my belt to look something similar to this:
I mostly wanted the back part to look like the one on the statue, but the file was not exactly like that as you can see here:
So I simply made a piece to go where I wanted it and I think it worked pretty good!
And since I did not fully connect it yet, I was able to test it out and see how it fits!
I wanted to put on my thigh pieces to see how this all looked so far. I think it's looking pretty good.
So now it's all put together and I wanted my belt to look something similar to this:
I mostly wanted the back part to look like the one on the statue, but the file was not exactly like that as you can see here:
So I simply made a piece to go where I wanted it and I think it worked pretty good!
And since I did not fully connect it yet, I was able to test it out and see how it fits!
I wanted to put on my thigh pieces to see how this all looked so far. I think it's looking pretty good.
Macattack64
Well-Known Member
For some reason I can't see any of you're newest pictures...
Spartan 051
Well-Known Member
same with me mac even some of the older pictures doesnt come up
HaloGoddess
Well-Known Member
Pictures have been fixed! For some reason, NONE of the images I have uploaded to imagecave are working, which I thought was pretty weird. I uploaded everything to photobucket so it should be fine now.
Macattack64
Well-Known Member
Wow that's hot.
- Status
