Pepakura Requests

[Jade Sparrow]

MNU body armor

Item Name
MNU body armor






Item Source
District 9






Reference Images

 

[drcrter]

ITEM NAME:

Isaac Clarke's Full Armour (Simplified)

ITEM SOURCE:

Dead Space 1/2

REFERENCE IMAGES:

http://2.bp.blogspot.com/-FB2OJfCia.../s1600/dead+space+papercraft+isaac+clarke.jpg

ADDITIONAL INFO:

Can you make one that is made completely out of paper? I only need the Chest, Helmet, Arms, Hands, and Boots

EXISTING FILE LINK

No none existing file

 

[iborg7of9]

Im looking for someone who is willing to convert the the pep files from pdo to pdf so I can open and print them on a mac. I am looking for the master chief mjolnir mark v hd armor. thanks.

 

[odival]

Hy guys, I really need the help of some modeler: I'm about to shoot a short movie, on the budget, about the WW2 but I can't find a pepakura file of a M1 Helmet (this one). Can someone make a pepakura file of HD M1 WW2 Helmet, please? If so, pm me

 

[Seth Knight]

Pep probably isn't the route to go with that, considering the time and money, you probably will want to buy an airsoft helmet and paint it diferently, one like this:
http://www.airsplat.com/Items/AC-APP-MICH-HEL.htm

Hope this helps.

-Seth

 

[Khymeira]

Tamora Calhoun?

Hello there, everyone! Any Wreck-It Ralph fans?
I was wondering if anyone has the skills to make the top armor of Sgt. Calhoun's suit since I want to make it to cosplay but this will be my very first cosplay and first experience using EVA foam.

Here is a photo of Calhoun:

For a 1000 x 1858 version (for the sake of details), here: http://images2.wikia.nocookie.net/__cb20120613182934/disney/images/1/18/Detona-Ralph-31.jpeg

I haven't been able to find detailed screenshots of her backside from the film so I am using her doll version as reference in the more hard to find angles. The doll is quite accurate!

http://www.flickr.com/photos/68105287@N03/sets/72157631909304425/with/8176322251/

I pretty much just want a very basic model so it doesn't have to be incredibly detailed. I don't want a pepakura of her entire armor but just her chest armor- her corset part not included. I think I can handle the shoulder blades, arm pieces and everything else, but her chest armor has me a bit intimidated especially since I'm quite new to this.

I really hope a basic model can be done! I'm excited to join this community, I can definitely learn a lot here! ^^

 

[Azungar]

Hello everyone! I am looking for a quite experienced pepakura/3D artist who could convert the helmet in the picture into a pepakura file.

Heres the file:
http://images2.wikia.nocookie.net/__cb20120621192505/fallout/images/d/dc/Elite_riot_gear.png

I dont currently have the 3D file for the helm, but I think I could find it in the game files if thats a necessity. I do have the pepakura files for a helmet which looks quite close to the one used in picture so I can provide you with that.

Also offering a small reward to the guy who manages to convert it. (If that is even allowed here.) Reply to this post or send me a private message if you are intrested.

Sorry and thanks.

 

[Seth Knight]

I think what you are talking about is this one, the Fallout New Vegas Ranger.
http://www.405th.com/showthread.php/29659-Fallout-New-Vegas/page3
or
http://www.therpf.com/f24/fallout-new-vegas-desert-helmet-pep-files-103472/

hope these links help.

-Seth

 

[Azungar]

I think what you are talking about is this one, the Fallout New Vegas Ranger.
http://www.405th.com/showthread.php/29659-Fallout-New-Vegas/page3
or
http://www.therpf.com/f24/fallout-new-vegas-desert-helmet-pep-files-103472/

hope these links help.

-Seth

Thanks Seth! Those are from the same game and nearly the same thing, those are the NCR Desert Ranger ones and Im talking about the NCR Elite Riot gear one, this one. http://images2.wikia.nocookie.net/__cb20120621192505/fallout/images/d/dc/Elite_riot_gear.png

Its quite different from the desert one so I am still looking for someone who could supply me with a pepakura file, as in create one for me.

 

[foxleader]

i've that chest from somewhere else too.

 

[Biocreative]

Hy guys, I really need the help of some modeler: I'm about to shoot a short movie, on the budget, about the WW2 but I can't find a pepakura file of a M1 Helmet (this one). Can someone make a pepakura file of HD M1 WW2 Helmet, please? If so, pm me

You can pick up almost any steel-pot helmet and no one will know the difference. The ones that came out after the Vietnam war are extremely cheap and can be found at almost any surplus store.

 

[Aion]

Xlii

It might be a little early to start asking for this, but I haven't found the Ironman Mark XLII (a.k.a. Mark VIII).
Besides the helmet there are no body PDO files.
Should I ask for help in here or in the 3D modeling section?
Thx!

 

[Seth Knight]

Uh, check the RPF, there's like 3 or 4 different model threads with just about every file for Iron Man 3, as well as Iron Patriot (not Osbourne).

-Seth

 

[Unaki]

Looking for someone that could make a PDO file for Dukemon from Digimon Tamers/Frontier. This will be for my fall lineup so it wouldn't be required for a while though I would like to at least finish the costume itself probably in late August or early September. If anyone could pep Dukemon for me I would love that.

Small album with a couple reference pictures:

http://imgur.com/a/uxN6M

Obviously the waist wouldn't be a 2 inch wide piece lol.

 

[Train Sebastian]

I would like to request a pepakura or even just a 3d model of the Scythe from Rooster Teeth's and Monty Oum's newer series "RWBY" Red.

This is the video it is from and I would like it to be the open scythe as is in the video from 1:20-3:10. If you are able to do the gun in a separate file as it is in the video from 1:12-1:20 that would be amazing as well.

I found a picture of a 3d model on google that someone made but I havent found any access to the file or the person whom made it. This is the google image search of what I found.
https://www.google.ca/search?hl=en&...2F1556846-need-tips-on-3d-modeling%2F;960;540

My e-mail is Trainsebastian@gmail.com if you have anything you want to talk to me about. I will also be willing to post progress once I start making it.
I would be forever happy if someone could do this for me XD

Have fun and Thank you

 

[Train Sebastian]

Item Name
I would like to request a pepakura (or even just a 3d model so I could finish it myself) of the Scythe from Rooster Teeth's and Monty Oum's newer series "RWBY" Red.

Item Source
This is the video it is from and I would like it to be the open scythe as is in the video from 1:20-3:10. If you are able to do the gun in a separate file as it is in the video from 1:12-1:20 that would be amazing as well.

Reference Images
I found a picture of a 3d model on google that someone made but I havent found any access to the file or the person whom made it. This is the google image search of what I found.
https://www.google.ca/search?hl=en&q...2F;960;540

Additional Info
My e-mail is Trainsebastian@gmail.com if you have anything you want to talk to me about. I will also be willing to post progress once I start making it.
I would be forever happy if someone could do this for me XD

Have fun and Thank you

 

[velicy]

item name
commando helmet/carter helmet


item source
halo reach/xbox 360


reference image

 

[Croc co]

item name
commando helmet/carter helmet


item source
halo reach/xbox 360


reference image

look around a little more there are tonnes of these

check the halo pepakura wikia

 

[velicy]

thanks that was useful

 

[Crimmson]

I would like to request a pepakura or even just a 3d model of the Scythe from Rooster Teeth's and Monty Oum's newer series "RWBY" Red.

This is the video it is from and I would like it to be the open scythe as is in the video from 1:20-3:10. If you are able to do the gun in a separate file as it is in the video from 1:12-1:20 that would be amazing as well.

I found a picture of a 3d model on google that someone made but I havent found any access to the file or the person whom made it. This is the google image search of what I found.
https://www.google.ca/search?hl=en&q=rwby+red+scythe&bav=on.2,or.r_gc.r_pw.r_qf.&bvm=bv.42661473,d.cGE&biw=1268&bih=642&um=1&ie=UTF-8&tbm=isch&source=og&sa=N&tab=wi&ei=EjMlUYelBeHxiwKt4ICwCA#imgrc=REy9JSgL-yYrRM%3A%3B5gfaerXMk3kbyM%3Bhttp%253A%252F%252Fi557.photobucket.com%252Falbums%252Fss13%252FKookehMonsters%252FrwbyOne.png%3Bhttp%253A%252F%252Fwww.minecraftforum.net%252Ftopic%252F1556846-need-tips-on-3d-modeling%252F%3B960%3B540

My e-mail is Trainsebastian@gmail.com if you have anything you want to talk to me about. I will also be willing to post progress once I start making it.
I would be forever happy if someone could do this for me XD

Have fun and Thank you

in progress, not done yet. check it out