Skyrim Pepakura Files

[Skullptura]

The fingers look like they would be almost painful to build. Our patience levels will be tested rofl

 

[rockerknight]

the fingers were not to bad to build took a few hours... and i lost a piece so i had to go searching in the viewer to print another one.

 

[Skullptura]

HA HA HA I hate loosing pices. Even though they might be small, they tend to be an integral piece that holds everything together. And I spend about an hour looking for it before realising i just need to print it again! Drives me nuts roflmao

 

[RepublicOfShae]

Yeah, Thanks Grimm n_n - your work is amazing!
Here's what I've been up to (and hoping these pics post)

I'm making up the peps and then chopping them up to make flatpatterns for EVA foam. Still haven't quite figured out fancy paint and such, but no doubt i'll learn I'm 1/2 way through the Daedric torso (making some minor changes as i go so it fits me) so if anything Zombie - slow down! I'm way behind n_n

 

[Skullptura]

I'm making up the peps and then chopping them up to make flatpatterns for EVA foam. Still haven't quite figured out fancy paint and such, but no doubt i'll learn I'm 1/2 way through the Daedric torso (making some minor changes as i go so it fits me) so if anything Zombie - slow down! I'm way behind n_n

Your work is fantastic. Thats a really really good pair of helmets. Your detailing is really good too. You should make your own thread and post all your stuff on it. I'll be watching for it!

 

[BSlapNinja87]

hey sorry to ask you wold not happen to have the nightingale armor id like to build that for a con plz and thank you

 

[DocDailey]

Grimm,

As always you are LEGEN...........

 

[DocDailey]

grimm,

as always you are legen...........

dary!!!!!!!!!!

 

[Pacemaker]

hey sorry to ask you wold not happen to have the nightingale armor id like to build that for a con plz and thank you

hey Ninja the Nightingale armor is mostly made of leather and cloth....grimm mostly does weapons and sold armor pieces and leaves the cloth and leather to the builders. I've seen females versions of nightingale armor online and they look super good. I would just suggest looking those up and playing skyrim or however you please to get the patterns and build it out of foam or cloth....real easy...and looks good.

 

[Skullptura]

Pacemaker... you got a link for those nigtingale ones?

 

[Roceifin]

anxiously waiting for the dragonscale armor.
also, are you going to do the bonemold armor?

 

[Pacemaker]

Pacemaker... you got a link for those nigtingale ones?

No i don't have a specific link to them Skullptura...but if you just go to google images and search Nightingale armor or Nightingale cosplay you'll find tons of good images for ideas of how or what to make the armor out of....there are some real pro looking ones out there and it doesn't seem to look like too hard of a build.

Good luck if you decide to go for it and post pics.

 

[BSlapNinja87]

ok thank you ill look into that shouldn't be to hard to do in leather and foam work

 

[Rising Valkyrie]

No i don't have a specific link to them Skullptura...but if you just go to google images and search Nightingale armor or Nightingale cosplay you'll find tons of good images for ideas of how or what to make the armor out of....there are some real pro looking ones out there and it doesn't seem to look like too hard of a build.

Good luck if you decide to go for it and post pics.

A good material would be pleather or lycra, bound to something. or you could run wire down the edges and use that as support. whatever you can get your hands on.

 

[titans2031]

Here is my 2nd attempt at a skyrim helm. Helm of Yngol. Again, many thanks to zombie for unfolding. Thank you so much!

I will have finished pics soon!

 

[zombiegrimm]

Things have been kinda hectic for the past few weeks, and have been trying to get everything in order. I would have gotten to this sooner but 4shared was being difficult and didn't allow me to upload for a few days. No idea what happened there. But, I am back and have a few more files to release. I will try to get to the new expansion pack, Dragonborn, but until they release it for PC, it will be awhile. Still trying to get things put together from Dawnguard. I'm one man, but I'm trying as fast as possible. Sometimes life gets in the way. Anyway, enough babbling, on to the files. Like always, MAKE SURE TO SCALE FOR YOURSELF BEFORE PRINTING. I cannot stress that enough. Enjoy the files.

Skyrim Male Dragonscale Helmet
Measures about 14 inches.

Download Link: http://www.4shared.com/file/WDDzmQ_X/Male_Dragonscale_Helmet.html

Skyrim Male Dragonscale Shoulders
Measures about 13 inches.

Download Link: http://www.4shared.com/file/67HfsVAd/Male_Dragonscale_Shoulders.html

Skyrim Male Dragonscale Gauntlets
Measures about 14 inches.

Download Link: http://www.4shared.com/file/3dLoo_Cc/Male_Dragonscale_Gauntlets.html

Skyrim Male Dragonscale Torso
Measures about 24 inches.

Download Link: http://www.4shared.com/file/aDbwc3E_/Male_Dragonscale_Torso.html

Skyrim Male Dragonscale Thighs
Measures about 16 inches.

Download Link: http://www.4shared.com/file/2qZENdHi/Male_Dragonscale_Thighs.html

Skyrim Male Dragonscale Boots
Measures about 23 inches.

Download Link: http://www.4shared.com/file/S9t2r7gd/Male_Dragonscale_Boots.html

 

[Tigersgrace]

THANK YOU SO MUCH!!! a must have in my book!

 

[wizard]

Thanking you once again dear sire

 

[hobbitdude13]

Zombie my man, you have just saved me. I had dl'd the model files from another source, but they were unsorted and not unfolded in anyway.

We are not worthy! We are not worthy!

I am in the middle of a Dragonscale build myself (here), and this will help immensely. Thanks again!

 

[zombiegrimm]

I was recently asked if I could do Ingots, and I have done just that. Since most of the textures are spread over the different Ingots, I've only done a few. It should be enough to cover all the bases. Enjoy!

Skyrim Dwarven Ingot
Measures about 10 inches.

Download Link: http://www.4shared.com/file/9uvP2JEm/Ingot_Dwarven.html

Skyrim Gold Ingot
Measures 10 inches.

Download Link: http://www.4shared.com/file/HZqRSc_5/Ingot_Gold.html

Skyrim Moonstone Ingot
Measures 10 inches.

Download Link: http://www.4shared.com/file/SgNmkuxr/Ingot_Moonstone.html

Skyrim Steel Ingot
Measures 10 inches.

Download Link: http://www.4shared.com/file/sSB4urYJ/Ingot_Steel.html