Skyrim Pepakura Files

[annabellector]

So you only have one of the dragon priest masks. Any chance you'll unwrap any of the others? I'd love to display a couple of them on the wall

if i'm not mistaken. they are all the same just different colors. one was woodlike another metal... so make a few of the one build and paint them to resemble your favorites

 

[JayOneSeven]

You're right, the only one that was different was the final one you get from collecting them all, which has the tusks. I just remember them looking different but a quick Google search proved me wrong Thanks!!

 

[Nephtis]

Thanks for the female Dragonscale armor. Chest is under construction.

Had to start over, anyone attempting this: Consider the waist-chest ratio when scaling!
It may not look so bad but under those side panels the waits IS tiny - so, girls, don't scale for the chest but rather for the waist! If that fit's the rest will work, too!

I build the base pepakura model and covered it with a layer of paper mâché. (Almost, ran out of paper for the second hip, i suppose i need to cut up a news paper - i would have prefered it without the print)

Shoulders are already 1 step further and covered with Worbla's finest Art, I just added them to make sure I scaled everything harmonically. And yes, those are the male shoulders I like them better than the female ones... WIP pictures here since I went a different route working without any fiberglass or resin http://i75.servimg.com/u/f75/16/58/54/97/dragon10.jpg)

More parts:

At first I wasn't too fond of the design for the bracers and wondered if I should just do a set of smaller boot covers so I'd have matching bracers & boots set (see large & small build) but they are extremely bulky for a bracer - not to mention that they'd actually guid a weapon towards the arm with the direction the plates are layered...

THANKS AGAIN for this great set! (and I can only second the dragon bone weapons, a Dragon bone war hammer or ax would be a fun thing to own (build).

 

[RedJak]

Any chance of getting any of the dragon bone weapons.

 

[zombiegrimm]

Hello once again 405th! I'm back once again to bring forth, yet another complete armor set. This time it is the Glass Female Armor! Yes, I have unfolded the Glass Armor now for the ladies of Skyrim. Make sure to scale these items for yourself before printing! Enjoy!

Glass Female Helmet
Measures about 11 inches.

Download Link: http://www.4shared.com/file/gADSDdi7/Glass_Female_Helmet.html

Glass Female Shoulders
Measures about 8 inches.

Download Link: http://www.4shared.com/file/X9Ms2LrH/Glass_Female_Shoulders.html

Glass Female Gauntlets
Measures about 8 inches.

Download Link: http://www.4shared.com/file/vJriGa_l/Glass_Female_Gauntlets.html

Glass Female Torso
Measures about 20 inches.

Download Link: http://www.4shared.com/file/tZk_YUCW/Glass_Female_Torso.html

Glass Female Torso Pieces
Measures about 12 inches.

Download Link: http://www.4shared.com/file/5MVqaeXd/Glass_Female_Torso_Pieces.html

Glass Female Boots
Measures about 16 inches.

Download Link: http://www.4shared.com/file/6Adl-SFt/Glass_Female_Boots.html

 

[Roceifin]

Thanks for the female Dragonscale armor. Chest is under construction.

Had to start over, anyone attempting this: Consider the waist-chest ratio when scaling!
It may not look so bad but under those side panels the waits IS tiny - so, girls, don't scale for the chest but rather for the waist! If that fit's the rest will work, too!

I build the base pepakura model and covered it with a layer of paper mâché. (Almost, ran out of paper for the second hip, i suppose i need to cut up a news paper - i would have prefered it without the print)

Shoulders are already 1 step further and covered with Worbla's finest Art, I just added them to make sure I scaled everything harmonically. And yes, those are the male shoulders I like them better than the female ones... WIP pictures here since I went a different route working without any fiberglass or resin http://i75.servimg.com/u/f75/16/58/54/97/dragon10.jpg)

More parts:

At first I wasn't too fond of the design for the bracers and wondered if I should just do a set of smaller boot covers so I'd have matching bracers & boots set (see large & small build) but they are extremely bulky for a bracer - not to mention that they'd actually guid a weapon towards the arm with the direction the plates are layered...

THANKS AGAIN for this great set! (and I can only second the dragon bone weapons, a Dragon bone war hammer or ax would be a fun thing to own (build).

WOW! i totally forgot worbla was a thing. post more pictures! i wanted to make the dragon scale set from the start, and was a little stopped by problems that worbla could easily fix.

 

[zombiegrimm]

Hello once again 405th! I'm still here, just took a little time off for Halloween and Assassin's Creed 4. I'm working on some more models to be released so no worries, I will be back soon!

 

[JayOneSeven]

Awesome, good to hear from you :] I've almost finished your helmet as my first ever pep, so thanks for the files!
I'm always interested in making Elder Scrolls stuff so I'll be sticking around this thread

 

[Roceifin]

Hello once again 405th! I'm still here, just took a little time off for Halloween and Assassin's Creed 4. I'm working on some more models to be released so no worries, I will be back soon!

any chance of getting the blades armor file out? ill unfold it if i need to.

 

[Roceifin]

Awesome, good to hear from you :] I've almost finished your helmet as my first ever pep, so thanks for the files!
I'm always interested in making Elder Scrolls stuff so I'll be sticking around this thread

get some pictures! i love seeing these files in use. more skyrim builds!

 

[JayOneSeven]

Can I request a file please? :]
I'm looking for the dragon scale shield (the light armor equivalent of the one you have up).
And just a hat tip to you, I used your Pepakura file to make this, which is still in the process of painting :] It wouldn't have been possible without your pep file!

 

[Tenkos]

Can I request a file please? :]
I'm looking for the dragon scale shield (the light armor equivalent of the one you have up).

He released the dragonscale shield file long time ago. Just look through the list again and you'll find it.

 

[JayOneSeven]

Ah thanks for the heads up, I found it! They all kinda blend in together when your eyes are as old as mine :]

Helmet is finished too!

 

[Aziara]

I'm loving these designs! Could you possibly make the files for the female version of the savior's hide?

 

[Blorin]

Ah thanks for the heads up, I found it! They all kinda blend in together when your eyes are as old as mine :]

Helmet is finished too!

I vote this your new avatar

 

[Vadavaro]

Agreed. If that is not avatar worthy, nothing is.

 

[JayOneSeven]

Haha you got it, soon as I get chance to resize it

 

[zombiegrimm]

I would have some items ready for release but I don't. I have been spending my time unfolding some weapons, and the bow I was working with really gave me a hard time. I should be able to upload some new weapons here in a couple more days!

 

[Fax287]

the daedric armor cant fit onto the paper i have. it keeps getting cut of by the margin. any suggestions?

 

[lordhood32]

Hey zombie, would you kindly do the Imperial armor the heavy version, i'd like to make the set for ESO if i'm crazy enough