Skyrim Pepakura Files

[Dracosfire83]

content unavailable

 

[EvIlDeAd1]

Zombiegrimm, I have been looking at your work for a long time and have been amazed at every one. I decided to make the Carved Nordic Armor. I had a blast with each piece. Thank you so much for everything. This was my first official build to completion.

 

[zombiegrimm]

Hello once again 405th, Skyrim fans! I was sick for a bit, so I was unable to work on some files. But, I cranked out a few last night for everyone to enjoy! Side note, I would to see more pictures of your finished projects. I'm collecting them for a scrapbook I want to put together. So, please, help me out, and post your finished works! Also, has anyone been keeping track of what's left? I'm sure most of the regular weapons are done, but with so many files in my collection, it's hard to know which ones are left. Any tips would be nice.

Another side note, I keep giving back because I love this community. I've seen some Facebook posts about people scamming others, and it pisses me off. One person in particular is all over Facebook, but I won't mention names. My point is, I'm sick of seeing people get scammed because the person they thought was a decent artist screwed them. I don't blame the fans. Not everyone knows about pepakura and how easy it is to make your own props. I blame people who take your hard earned money and run with it. At least you should get your prop that you ordered. I just want to let everyone know that I will NEVER scam another person. All my files are free to everyone. This is my passion, and if you've downloaded any of my files, you should be able to see that passion. I even take requests from time to time to help others. I try my best to help everyone I can. I also encourage everyone to help each other out. Hopefully one day our beloved community will not have people who pull others down. This site, and its fans are what keep me going. I see the joy everyone gets when pictures are posted. The hard work shows, and I'm proud of everyone of you!

Sorry about that, just needed to clear the air. Anywho, back to the files. I've got the rest of the Orcish weapons for everyone to enjoy! Have fun! And don't forget to post your finished projects!

Orcish Battle Axe
Measures about 48 inches.

Download Link: http://www.4shared.com/file/fpBk4egbba/Orcish_Battle_Axe.html

Orcish Greatsword
Measures about 64 inches.

Download Link: http://www.4shared.com/file/aj_w1nzqba/Orcish_Greatsword.html

Orcish Hand Axe
Measures about 28 inches.

Download Link: http://www.4shared.com/file/lfoWIHVlba/Orcish_Hand_Axe.html

Orcish Mace
Measures about 36 inches.

Download Link: http://www.4shared.com/file/1IviwNLOce/Orcish_Mace.html

Orcish Sword
Measures about 48 inches.

Download Link: http://www.4shared.com/file/YqYbI-JBce/Orcish_Sword.html

Orcish War Hammer
Measures about 54 inches.

Download Link: http://www.4shared.com/file/H-ojQXLnba/Orcish_War_Hammer.html

 

[Doden Mane]

Do u plan on doing thalmar boots zombie?

 

[lamira]

Wow!!!
Thank you so much,i have udated our costumes with the orcish wepons,hubby is getting the axe and sword of the orcish set and i will make the orcish battelaxe from you rfiles as well.
I am very happy, they look very nice and the dagger isn't that hard to fold according to hubby,we cut that out a week or so ago.
He will be folding and coating them with resin,i will do the detailing and the painting.We will make them look like bone a think.

Again thank you so much,and sad to hear you have been ill.
Not sure if it is in you country as well, but here a lot of people (including me) have been suffering from the flu.

Take care of yourself, and i cannot wait to see what else you will make.

 

[kyrok]

First I want to thank Zombiegrimm for all the great work here.

Below is my first attempt at assembling a pep model. Unfortunately it is just a little too small. I have a few questions if anyone can help out.

Where would be a good place/places to take measurements for a better fit?
How much space should you account for finishing the interior?
At the temples where the mandables(?) connect to the helmet the folds are really tiny and hard to arrange. Does anyone have advice that would make that section easier?

 

[MNCProps]

Hey zombiegrimm
I just wanna thank you for the files you shared with the community and show you the result

all the WIP are found here ^^
https://www.facebook.com/media/set/?set=a.600805680033175.1073741838.264979793615767&type=3

 

[Nephtis]

kyrok. Personally I measure the width on the inside of the helmet to make sure it fits - and the distance between eyes if it has a closed front with just eye holes. It never hurts to add a little extra for padding. I build my Dragonscale helemt exactly to size and it fits - but without padding it gets ucomfortable to wear after a while. Since then I make sure I have a little room for padding. Look into the kind of padding they sell for bicycle helmets, I found that was a nice compromise if you want to keep your helmet as small as possible.
MNCProps Impressive - and that attention to detail!

 

[MCSpartan105]

Oblivion Legion armor ( The Horsehair crest helmet version) Really wanting to build this set!

 

[zombiegrimm]

Hello once again fellow Skyrim fans! No files this time. I've been struggling with medical issues and my personal life as well. Its made unfolding very difficult to do. But, fear not, I'm working on a super special set of armor for everyone. Hint, it is in Skyrim, but not as an armor. Not yet anyways. Hopefully I'll have that ready soon!

 

[hobbitdude13]

Here you go, McSpartan. All variants of the Imperial Legion armor from Oblivion are included. And the Dwarven armor.


Cool to hear that, zombie! Hope your medical issues work out for you man you've been good to all of us

 

[MCSpartan105]

I cannot wait to start a Dawnguard cosplay, Zombiegrimm, wondering if you would please unfold the knee armor from the heavy armor of dawnguard? That would be legend

 

[Seylum]

In average, how long. Does it take to build a Deadric armor for a beginner ?

 

[MCSpartan105]

Thanks hobbitdude13, any chance of adding the elbow guard as unfolds to the legion armor?

 

[hobbitdude13]

http://www.4shared.com/file/hZ4bJKx7ce/Legion_Elbow_Armor.html

Elbow armor is the same across all armor variants, and also between right arm and left arm so this is only one. I sized it to my arm, as a default. Enjoy!

Keep checking my thread for new Oblivion unfolds.

 

[chrisfrog1234]

Is it possible for anyone to unfold an Ancient Nord Sword or Axe? -thanks a bunch

 

[cullen9]

My first pep project. I wanted to look like it was an iron mask I dug out of the ground.

Thanks Zombie.


also does anyone know how to edit the pep files I wanted to print just the deadric fingers, not the fingers and gauntlets..

 

[zombiegrimm]

Hello once again 405th! I apologize for being so late with new files. Been struggling with medical issues and personal problems. I'm not gonna lie, its been difficult here. But, I have some new files for you to enjoy right here in December! I have no idea if this batch will be the last for this year or not. I tend to get to files in a crazy way, so who knows. I've included a few items that were requested. Trying to get everything finished. The big surprise is, Ysgramor Armor! Hope every enjoys the files! Make sure to scale the armor for yourself before printing! Also, the Nord Hero weapons are exactly the same as the Ancient Nord weapons. No idea why they were labeled as such, but enjoy them anyway.

Dawnguard Male Knee Guards
Measures about 9 inches.

Download Link: http://www.4shared.com/file/YTO2QIRCba/Dawnguard_Male_Knee_Guard.html

Nord Hero Hand Axe
Measures about 28 inches.

Download Link: http://www.4shared.com/file/qDf5Zj8oba/Nord_Hero_Hand_Axe.html

Nord Hero Sword
Measures about 50 inches.

Download Link: http://www.4shared.com/file/hMyvKodBce/Nord_Hero_Sword.html

Axe of Ysgramor
Measures about 54 inches.

Download Link: http://www.4shared.com/file/QeNskIIuce/Axe_of_Ysgramor.html

Ysgramor Boots
Measures about 20 inches.

Download Link: http://www.4shared.com/file/fWQurdtMce/Ysgramor_Boots.html

Ysgramor Thighs
Measures about 15 inches.

Download Link: http://www.4shared.com/file/2Q_JE0M5ba/Ysgramor_Thighs.html

Ysgramor Belt
Measures about 9 inches.

Download Link: http://www.4shared.com/file/nzvW795qba/Ysgramor_Belt.html

Ysgramor Gauntlets
Measures about 10 inches.

Download Link: http://www.4shared.com/file/C24WYgQEba/Ysgramor_Gauntlets.html

Ysgramor Torso
Measures about 22 inches.

Download Link: http://www.4shared.com/file/Oovu39Ypce/Ysgramor_Torso.html

Ysgramor Shoulders
Measures about 12 inches.

Download Link: http://www.4shared.com/file/vS2bpw-vba/Ysgramor_Shoulders.html

Ysgramor Helmet
Measures about 18 inches.

Download Link: http://www.4shared.com/file/RbaIKyg7ce/Ysgramor_Helmet.html

 

[chrisfrog1234]

Thank you so much!!!!!! You're the best!!!!

 

[sansastark]

Hey, Zombie! Your work is awesome, man. I've been following this thread for... months, maybe a year now. Really appreciate everything you're doing for this fandom. You truly are a god among men! I've made... three or four builds in the past week off your unfolds, and I'm loving all of them. I do have one question and a few requests.

I ran into this problem with the steel sword, but I've seen it on a few weapons (a problem on my end, that is, because I'm just a beginner). What am I supposed to do with pieces that are laid across multiple pages? Just cut out 'tabs' of my own and glue them together that way? Or is there a way to print them differently?

And some requests - I know you can't do things like the Nightingale armor because of the leather, but could you do any Thieves Guild pieces? The 'hard' pieces, like the gauntlets/gloves and shoulders? I'm not sure if that would translate well into pepakura, but I would really appreciate it if you gave it a look and let me know. Other than that, I'd love to see the iron dagger and the hold guard helmet! I've seen a few people do the helmet from pepakura, but never been able to get my hands on any actual files.