JoshuaDean444
New Member
I'm extremely impressed with all the hard work and detail you guys have put into these. Just wanted to say THANK YOU VERY MUCH for taking the time to unfold and scale everything.
Skyrim Pepakura Files
- Thread starter zombiegrimm
- Start date
- Status
ggg - Couldn't resist temptation - someone has to try building that sea horse.
I did sort the parts in groups and have cut the snout & eyes parts so far. Will probably see how assembling goes this weekend.
From the looks of it the spikes on the forehead will be the most difficult parts since those are really tiny parts.
I'll show you how it looks - good or bad. Not sure I'll do the whole thing - that probably depends on how it goes but I just had to try!
I did sort the parts in groups and have cut the snout & eyes parts so far. Will probably see how assembling goes this weekend.
From the looks of it the spikes on the forehead will be the most difficult parts since those are really tiny parts.
I'll show you how it looks - good or bad. Not sure I'll do the whole thing - that probably depends on how it goes but I just had to try!
zombiegrimm
Active Member
Hello once again Skyrim fans!!
Sorry that I have been absent lately, as I just under went a major surgery to hopefully help lower my pain levels. Its' been a week since surgery happened and I would be further along but I popped one of my internal stitches, which lead to a quick visit to the emergency room. They gave me antibiotics and advised me to up the dosage of my pain pills to compensate for the increased pain I'm going through. So, I've been a bit out of it lately and haven't gotten to work on any files. I do have some templates that I was working on prior to the surgery but they aren't finished. I'll try my best to get those out to you guys as soon as possible. The pain pills help manage the pain but make me super groggy, so concentrating is difficult. But letting you know I haven't forgotten about you guys, the fans.
Sorry that I have been absent lately, as I just under went a major surgery to hopefully help lower my pain levels. Its' been a week since surgery happened and I would be further along but I popped one of my internal stitches, which lead to a quick visit to the emergency room. They gave me antibiotics and advised me to up the dosage of my pain pills to compensate for the increased pain I'm going through. So, I've been a bit out of it lately and haven't gotten to work on any files. I do have some templates that I was working on prior to the surgery but they aren't finished. I'll try my best to get those out to you guys as soon as possible. The pain pills help manage the pain but make me super groggy, so concentrating is difficult. But letting you know I haven't forgotten about you guys, the fans.
Take it slow and time your timer to recover from surgery. Taht's the top priority.
Just popping in to show you my trial of the seahhorse:
Just as I imagined the horns on the forehead are the toughest part - parts so tiny I had to print them without the numbers or I couldn't make out the lines, lots of folds... that part isn't quiet as clean as it should have been but I am almost done with it. It's strengthened from the inside with a layer of paper maché which included as I build along and if I manage to finish it it's get a layer from the outside as well, to smooth out the whole thing.
Speaking of smoothing things out - I decided to lower the threshold for the folding lines to get hidden to 160 - a lot less folds and the paper curves just enough to work with this. I've played a bit with that thresthold on my last few builds and found that 160 works well enough for organic shapes / curves when you don't need to many sharp edges.
Just popping in to show you my trial of the seahhorse:
Just as I imagined the horns on the forehead are the toughest part - parts so tiny I had to print them without the numbers or I couldn't make out the lines, lots of folds... that part isn't quiet as clean as it should have been but I am almost done with it. It's strengthened from the inside with a layer of paper maché which included as I build along and if I manage to finish it it's get a layer from the outside as well, to smooth out the whole thing.
Speaking of smoothing things out - I decided to lower the threshold for the folding lines to get hidden to 160 - a lot less folds and the paper curves just enough to work with this. I've played a bit with that thresthold on my last few builds and found that 160 works well enough for organic shapes / curves when you don't need to many sharp edges.
zombiegrimm
Active Member
Hello once again Skyrim fans!!! I'm just here to update everyone and give a MAJOR hint as to the next batch of files.
So, for the update, I'm in and out of the emergency room for intense pain at my incision site. They are still not sure what is going on quite yet. The doctors thought the surgery would help my pain, but it instead moved the pain to another area. And it is still horrendous pain. At the moment, I've got some pain meds to get me through until I can see the doctor later this week. When I'm on the pain meds, I can move around a bit more, but it makes me groggy. I'm working on new files, but it is slow going. Hard to concentrate until a half hour before my next pill. Which is weird, but whatever. I'm still here, and still trying to do things when I probably should be resting. That's on me, but I don't know how to stop doing stuff. Its a gift and a curse. Seriously.
Thank you to everyone for the huge amount of patience you given me over the last few months. This surgery has knocked me down hard. I'm getting back up but it is taking longer than I want. I appreciate all of my fans, and I think of all of you often. This thread has literally saved me from boredom and sometimes allows me to think of other things besides the pain I experience all the time. I sincerely thank everyone one of you for believing in me, and downloading my work. I am in awe of what everyone can create.
For the next batch, it will be both male and female armor sets. But the hint is here. The armors are not meant to be built like the rest of my files. These will be templates for you to lay material over and create something... unique.
And I've given too much hints away. If you know what it is, ten points to you!
So, for the update, I'm in and out of the emergency room for intense pain at my incision site. They are still not sure what is going on quite yet. The doctors thought the surgery would help my pain, but it instead moved the pain to another area. And it is still horrendous pain. At the moment, I've got some pain meds to get me through until I can see the doctor later this week. When I'm on the pain meds, I can move around a bit more, but it makes me groggy. I'm working on new files, but it is slow going. Hard to concentrate until a half hour before my next pill. Which is weird, but whatever. I'm still here, and still trying to do things when I probably should be resting. That's on me, but I don't know how to stop doing stuff. Its a gift and a curse. Seriously.
Thank you to everyone for the huge amount of patience you given me over the last few months. This surgery has knocked me down hard. I'm getting back up but it is taking longer than I want. I appreciate all of my fans, and I think of all of you often. This thread has literally saved me from boredom and sometimes allows me to think of other things besides the pain I experience all the time. I sincerely thank everyone one of you for believing in me, and downloading my work. I am in awe of what everyone can create.
For the next batch, it will be both male and female armor sets. But the hint is here. The armors are not meant to be built like the rest of my files. These will be templates for you to lay material over and create something... unique.
And I've given too much hints away. If you know what it is, ten points to you!
sansastark
New Member
Happy to hear from you, man! I hope everything works out well. I definitely understand the curse of creativity, haha. You can't reason with that one. And I'm excited for the new batch! I have an idea, possibly wrong, but... well, if I'm right, I'll be very, very ecstatic! You take care of yourself, though.
zombiegrimm
Active Member
Hello once again Skyrim fans!! Happy fourth to you all. Hope everyone is enjoying this holiday. I have a few items for everyone to download during this festive day. If anyone guessed Nightingale armor, then you were correct. Unfortunately, doctors haven't gotten me regulated on pain meds and I haven't been able to unfold everything I wanted. But I got the Male armor finished and will be releasing it today. I will still be working on the Female set, just gonna take a little longer. I promise I'll get them released soon. As always, make sure to scale the files to yourselves before printing. These are meant to be used to cover with material and transfer. So that you can duplicate the clothe look. Enjoy!
Male Nightingale Boots
Measures about 18 inches.
Download Link: https://www.4shared.com/file/kVKa3gPxba/Nightingale_Male_Boots.html
Male Nightingale Cape
Measures about 48 inches.
Download Link: https://www.4shared.com/file/Dw59yv4_ce/Nightingale_Male_Cape.html
Male Nightingale Gauntlets
Measures about 12 inches.
Download Link: https://www.4shared.com/file/SqhrGp9Hce/Nightingale_Male_Gauntlets.html
Male Nightingale Hood
Measures about 16 inches.
Download Link: https://www.4shared.com/file/9kYK9hcPce/Nightingale_Male_Hood.html
Male Nightingale Shoulders
Measures about 8 inches.
Download Link: https://www.4shared.com/file/bx7XHyfYce/Nightingale_Male_Shoulders.html
Male Nightingale Thighs
Measures about 9 inches.
Download Link: https://www.4shared.com/file/taUjCt7Gce/Nightingale_Male_Thighs.html
Male Nightingale Torso
Measures about 38 inches.
Download Link: https://www.4shared.com/file/ml8VU4u1ce/Nightingale_Male_Torso.html
Male Nightingale Boots
Measures about 18 inches.
Download Link: https://www.4shared.com/file/kVKa3gPxba/Nightingale_Male_Boots.html
Male Nightingale Cape
Measures about 48 inches.
Download Link: https://www.4shared.com/file/Dw59yv4_ce/Nightingale_Male_Cape.html
Male Nightingale Gauntlets
Measures about 12 inches.
Download Link: https://www.4shared.com/file/SqhrGp9Hce/Nightingale_Male_Gauntlets.html
Male Nightingale Hood
Measures about 16 inches.
Download Link: https://www.4shared.com/file/9kYK9hcPce/Nightingale_Male_Hood.html
Male Nightingale Shoulders
Measures about 8 inches.
Download Link: https://www.4shared.com/file/bx7XHyfYce/Nightingale_Male_Shoulders.html
Male Nightingale Thighs
Measures about 9 inches.
Download Link: https://www.4shared.com/file/taUjCt7Gce/Nightingale_Male_Thighs.html
Male Nightingale Torso
Measures about 38 inches.
Download Link: https://www.4shared.com/file/ml8VU4u1ce/Nightingale_Male_Torso.html
Crimmson
Well-Known Member
Thank you zombiegrimm . I hope everything turns out good for you here soon, I hope that the doctors figure out what is causing the pain. hope you get well.
Last edited by a moderator:
sansastark
New Member
YES! I was sooo hoping it would be the Nightingale armor!!! You really are the man, Zombie. I hope you start feeling better soon!
PsychicOrchid
New Member
I'm so glad you've created files for the Nightingale Armour! My friend has challenged me to create a set, and this will make it so much easier for me! Thanks a million for these amazing files! I'm actually working on Dragonscale Armour at the moment, using your files, and it's coming along great.
I wish you a speedy recovery!
I wish you a speedy recovery!
TxWarMachine
New Member
First off I just wanna say your work is amazing and thanks for putting in all the hours to help everyone! Ive decided to build the ebony male armor but can't find the pep files. The links on 4shared are no longer working. I know its been awhile but i was wondering if you still had these and if so is there any chance i can get them from you?
zombiegrimm
Active Member
Hello Skyrim fans!! If a link isn't working, just let me know and I can fix it. Like the ebony armor for the males wasn't working. I went in and updated it, so everything should be fine now. If other links don't work for some reason, let me know, and I'll put up a new link.
The Dragonbone Mace (page 20) link is also invalid. I'd really love to make that mace. Whenever you have time, and if you're able to mend the link I'd appreciate it.
Thank you for all the files.
grifandsargert
Member
like it
zombiegrimm
Active Member
Hello once again Skyrim fans!!!
I'm working on fixing the broken links. I have a DeviantArt page as well, so if the links don't work on here, they will work for the DeviantArt page. I'll leave a link up for that. Make sure to bookmark it, as I post in these two areas.
DeviantArt page: http://zombiegrimm.deviantart.com/
Here is a link to the page in my DeviantArt for the two broken links.
Daedric Mace: http://zombiegrimm.deviantart.com/a...time ((dragonbone) AND (by:ZombieGrimm))&qo=4
Sanguine Rose: http://zombiegrimm.deviantart.com/a...new=10%3A1437755336&ga_type=edit&ga_changes=1
Once again, the links should be working for these. If you come across anymore, please let me know, and let's keep this thread alive. Show me your progress and finished armor pieces. I wanna know what everyone is making, or made.
I'm working on fixing the broken links. I have a DeviantArt page as well, so if the links don't work on here, they will work for the DeviantArt page. I'll leave a link up for that. Make sure to bookmark it, as I post in these two areas.
DeviantArt page: http://zombiegrimm.deviantart.com/
Here is a link to the page in my DeviantArt for the two broken links.
Daedric Mace: http://zombiegrimm.deviantart.com/a...time ((dragonbone) AND (by:ZombieGrimm))&qo=4
Sanguine Rose: http://zombiegrimm.deviantart.com/a...new=10%3A1437755336&ga_type=edit&ga_changes=1
Once again, the links should be working for these. If you come across anymore, please let me know, and let's keep this thread alive. Show me your progress and finished armor pieces. I wanna know what everyone is making, or made.
- Status
Similar threads
