Spartan Rae

[BlondieDoes]

The build thread for my Halo Spartan. She is a generation IV. I have thought about Halo 5 guardians Copperhead core, Anubis helmet but I’m leaning towards doing MK IV for now because aesthetic lol. I’m recycling my old blue Spartan armor for this until I can do the build I want. I love Caboose but I was so tired of being called Caboose lol. The Cortana Spartana will be my new blue armor eventually.

I am hoping we might see some renditions of Halo 5 armor in infinite as I would love to mix and match armor all in one game.

Essentially what I am doing for now is repainting my blue armor until I can commission a build. Or maybe I’ll just make two versions, I don’t know XD

Spartan Rae:

Mark IV core (unless says otherwise)

Epsilon Winter Coating
Anubis , Sabertooth
Sunset Cloak ( hexagon pattern red)
Chest- MK IV standard (would love to slap a knife on it- JUST a knife)
Left shoulder- TAC-Crys flatblade
Right shoulder-UA/TATIUS
Gloves- CHALLENGER (MK V)
Wrist- UA/P1DA Bracer (MK V)
Utility- M45 Hardcase (MK V)
Knee- UA/SKYKOMISH

 

[BlondieDoes]

Halo Infinite Anubis helmet, silver base using Rustoleum Bright Coat Metallic Finish in silver

 

[BlondieDoes]

Visor. I used a face shield / sneeze guard (the thin flexible plastic ones from Amazon). I used reflective tint on the inside and VViViD bio Hex headlight tint (the red hexagonal tint) on the outside.

 

[BlondieDoes]

Halo Reach - Noble 6 - Mark 5 armor set including Helmet by moesizzlac

Update 04.12.24 - Added v2 Up ArmorUpdate 04.08.24 - created v2 for the full chest to better reflect the front chest of noble 6. made some other quick fixes as this file was made so long ago and I've learned a lot since then.Update 03.04.20 - Uploaded V2 of Right Hand Plate. First one was a...

www.thingiverse.com

Possible sources (TBC)

Halo Wars - Mark IV Armor Set - Including Helmet by moesizzlac

This is an armor set remixed from a Pepakura armor files uploaded on the 405th.com forum.The files I made printable are from:https://www.405th.com/forums/resources/halo-wars-mjolnir-mark-iv-standard.11/It's sized to 5'10" 185LB Person.The reason for uploading the armor set like this is that it...

www.thingiverse.com

Halo Infinite - Anubis Helmet by moesizzlac

Added Meowlnir and Jackal EarsHere is the Halo Helmet from Infinite called Anubis. It is currently sized for a 24" head.Enjoy

www.thingiverse.com

Sabertooth:

RS[3]/SABERTOOTH Helmet Attachment 3D Model for Cosplay Armour Inspired by Halo Infinite — Skookum Props

The RS[3]/SABERTOOTH by Lethbridge Industrial is a remote sensor suite for training AI but we all know it’s actually cool headphones for your Multiplayer SPARTAN to wear. This set of 3D models will allow you to build your own RS[3]/SABERTOOTH attachment as it appears in Halo Infinite. All files are

www.skookumprops.ca

Shoulder

HALO 5 SHOULDER LEFT by Galanionn

This is a remix of a part created by "CarterBuilder12" from http://www.405th.com/Link: http://www.405th.com/showthread.php?t=47387&highlight=armor+3d+printebleThanks!

www.thingiverse.com

Fred Knife

Halo infinite/legends Fred Knife by ODCA

Fred 104's shoulder knifes from halo legends/infiniteModeled these for my own build, you'll need a 4mm metal or fiberglass rod for the internal supportif you want to see more of the costume, you can visit my build thread...

www.thingiverse.com

ODST knife

Halo ODST Custom Knife by purplehazey

Halo ODST Knife. Slot for 150 5mm rod for alignment. You will have to mirror it to get a complete knife. Not for commercial useUpdated files: Thickened blade, fixed slot, splitted the guard from the knife, improved text for ODST logo. New files are as follow:ODST Grip.stlODST Blade.stlODST...

www.thingiverse.com

Halo 5 SASS knife

Halo 5 Assassination Knife by ReProps

Here's my attempt at the Halo 5 Assassination Knife, should be about a foot long in length.Be sure to post a make and check out my other models

www.thingiverse.com

Misc. Mk. VII Chest Attachments by Torrin_Norixius

TAC/MK 88 RatioParadise Rignever been printed

www.thingiverse.com

 

[KocourUS]

Visor. I used a face shield / sneeze guard (the thin flexible plastic ones from Amazon). I used reflective tint on the inside and VViViD bio Hex headlight tint (the red hexagonal tint) on the outside.

How is the visibility out of that? It looks like you can't see a thing.

 

[BlondieDoes]

How is the visibility out of that? It looks like you can't see a thing.

Everything is red but I can see pretty well!

 

[caretaker08]

It looks so good so far. Keep up the good work sis and if you need help just message me lol

 

[BlondieDoes]

It looks so good so far. Keep up the good work sis and if you need help just message me lol

I will lol I need foam parts and bits. I need to find all my 3D print files folder. XD

 

[caretaker08]

I will lol I need foam parts and bits. I need to find all my 3D print files folder. XD

Just let me know what bits out of foam I'll help make them lol

 

[Hype]

View attachment 352307

POV: You mouthed off a little too much to the police officer and got pepper sprayed.

Looks like a good plan. I'm excited to see how the different armor pieces mix and match.