WAR MACHINE HIGH-DEF Pepakura files TEAM-UP second try

[zabana]

Hola Zabana, si no veo el link en TheRPF no me percato que sabes hablar español, oye este trabajo de War Machine esta excelente, y la Mark III esta de la misma forma.
Espero cuando tenga algunas dudas me puedas ayudar.
Saludos.

Muchas gracias tio!

La verdad que suelo escribir en ingles por respeto al foro, muchas veces lo que hago es escribirlo tambien en ingles asi nadie se pierde nada

Thanks Dude!!!

 

[zabana]

Good to see u guys! I am new one in this board actualy this day. ha ah

and i love your work man. i very nice hope to see update soon.

ps. can i ask in the first page i didn't see the file for gounlet and leg. ?

Shin is going to be unfolded soon, and forearm needs a bit of tweaking yet

 

[ironmansuitmk6]

i PM'ed spectrum to see whats taking so long, im wating for an answer.

 

[Spektrum917]

OK sorry guys this took a while but I have some updates!
Update #1
When I was checking the thigh and hip-pod files I noticed I unfolded the files INSIDE OUT :$
So I went back and fixed the 3 files
Zabana let me know if you replace these to the front page so I can disable the original ones.

Left and Right Thighs (fixed)
http://www.4shared.com/file/RYBrVBqZ/WM_Left_Thigh_fixed_.html
http://www.4shared.com/file/uCDKaiL3/WM_Right_Thigh_fixed_.html

Hip-Pod (fixed)
http://www.4shared.com/file/rmHI8SKg/WM_Hip-Pod_fixed_.html

Update #2
Here are the shins and the thruster/boot cover files. I'm not sure if you would need to flip the thruster file as I have yet to pep the shin/thruster to check. The part looks even so I doubt you need to flip... lets hope I'm right lol.

Shins
http://www.4shared.com/file/VqNPDE2E/WM_Left_Shin.html
http://www.4shared.com/file/b_vniAVz/WM_Right_Shin.html

Calf Thruster/Boot Cover
http://www.4shared.com/file/6xTA-Vc3/WM_Calf_Thruster__Boot_Cover.html

Update #3
So I finished the chest I have been working on XD! Here's my progress!

 

[mkshane81]

First of all, great work to all of the modelers in here thus far. If only I had time to do this for myself.

@Spektrum: fantastic pep work man!!

-Matt

 

[zabana]

OK sorry guys this took a while but I have some updates!
Update #1
When I was checking the thigh and hip-pod files I noticed I unfolded the files INSIDE OUT :$
So I went back and fixed the 3 files
Zabana let me know if you replace these to the front page so I can disable the original ones.

Left and Right Thighs (fixed)
http://www.4shared.com/file/RYBrVBqZ/WM_Left_Thigh_fixed_.html
http://www.4shared.com/file/uCDKaiL3/WM_Right_Thigh_fixed_.html

Hip-Pod (fixed)
http://www.4shared.com/file/rmHI8SKg/WM_Hip-Pod_fixed_.html

Update #2
Here are the shins and the thruster/boot cover files. I'm not sure if you would need to flip the thruster file as I have yet to pep the shin/thruster to check. The part looks even so I doubt you need to flip... lets hope I'm right lol.

Shins
http://www.4shared.com/file/VqNPDE2E/WM_Left_Shin.html
http://www.4shared.com/file/b_vniAVz/WM_Right_Shin.html

Calf Thruster/Boot Cover
http://www.4shared.com/file/6xTA-Vc3/WM_Calf_Thruster__Boot_Cover.html

Update #3
So I finished the chest I have been working on XD! Here's my progress!

Replaced

Very good job done on you suit

 

[vshore100]

Great work on the files you guys. And great job Spektrum on your pepping man. This may have already been mentioned but if not...Is there any chance once all of the files are complete that they could be put into an all in one zip file? Also are all the files modeled at the same scale? Thanks again to Zabana and the rest of the bunch for putting this great armor together for the community.

 

[ironmansuitmk6]

Good job spectrum! nice files and thanks for the update!!!

Zabana how are you doing with the forearms?

 

[Spektrum917]

Great work on the files you guys. And great job Spektrum on your pepping man. This may have already been mentioned but if not...Is there any chance once all of the files are complete that they could be put into an all in one zip file? Also are all the files modeled at the same scale? Thanks again to Zabana and the rest of the bunch for putting this great armor together for the community.

I think that once Zabana is done with the forearms there might be a possibility for a zip file with all suit parts. I'm not sure if the armory will be in the same zip file or a different one. As for the scaling, no its all at different scales... so when you rescale the parts you need to, Pepakura Designer will scatter all the parts again and you might need to trim some down to fit the page :/... I tried to scale the leg parts to the same scale of the previous War Machine .pdos. Hope it helped.

BTW Zabana, are the hand plates going to be with the forearm or a file on their own?

And thanks to everyone for the positive feedback on my progress but its not done yet so it could only mean more updates for the moment i'm working on unfolding ironmansuitmk6's gatling gun and arm files so keep an eye out for that

 

[zabana]

I think that once Zabana is done with the forearms there might be a possibility for a zip file with all suit parts. I'm not sure if the armory will be in the same zip file or a different one. As for the scaling, no its all at different scales... so when you rescale the parts you need to, Pepakura Designer will scatter all the parts again and you might need to trim some down to fit the page :/... I tried to scale the leg parts to the same scale of the previous War Machine .pdos. Hope it helped.

BTW Zabana, are the hand plates going to be with the forearm or a file on their own?

And thanks to everyone for the positive feedback on my progress but its not done yet so it could only mean more updates for the moment i'm working on unfolding ironmansuitmk6's gatling gun and arm files so keep an eye out for that

Yes, the hand plates will be apart, indeed it will be 3 different files when done

 

[ironmansuitmk6]

zabana any news on the forearms?

 

[zabana]

zabana any news on the forearms?

No, sorry, I was busy with family this easter, it will take a while to work on it, sorry

 

[ironmansuitmk6]

No, sorry, I was busy with family this easter, it will take a while to work on it, sorry

yeah i was doing the same thing, i was asking just in case there was news.

 

[ironmansuitmk6]

zabana i dont know if youre a captain america fan but im working on the 3d model of the helmet and the plan is to make it peppable so if youre interested in helping with the model PM me.(right now it needs to be smoother and then unfolded)

P.S. any one else interested feel free to PM me.

 

[zabana]

zabana i dont know if youre a captain america fan but im working on the 3d model of the helmet and the plan is to make it peppable so if youre interested in helping with the model PM me.(right now it needs to be smoother and then unfolded)

P.S. any one else interested feel free to PM me.

I´m not the most fan but I´m interested of course ( I did a captain shield time ago ) but problem as always is not having enough free time

 

[Spektrum917]

I´m not the most fan but I´m interested of course ( I did a captain shield time ago ) but problem as always is not having enough free time

i got time but i dont know much about working with 3D files other than unfolding lol ironmansuitmk6 i sent you a message already
i worked on a cap helmet already and if its not a problem with you guys here i'll share a couple pics here on that? seeing as this is a War Machine thread lol

 

[ironmansuitmk6]

My recently finish models(what ive been working on):
war machine (files in this thread)
-also been working on the pod for the ex wife (almost done)
captain america helmet(new movie version)
thor mjolnir(hammer from the new movie)
also will be working on mk5 files (plan to start after im done with war machine)

P.S. in case anyone is interested in unfolding any of these PM me or quote/reply this post.

 

[le yo ra]

[/QUOTE] P.S. in case anyone is interested in unfolding any of these PM me or quote/reply this post.[/QUOTE]


it's me... i'm back...hehe


i've transfered to the other side of the pond and having problem with materials here... but cardstock,very available,LOL.... you can add/view me

eorlitofang@yahoo.com (facebook account,email account)

i can help with unfolding... but i go on line every tuesday and friday only, for uploading the files(if there are)... good luck to us...

 

[ironmansuitmk6]

CHECK OUT MY NEW THREAD FOR THE CAP AND THOR FILES ANYONE INTERESTED IN HELPING ME MAKE THESE FILES BETTER AND PEPPABLE IS WELCOME.
http://www.405th.com/showthread.php/32078-IRONMANSUITMK6-s-Captain-America-and-THOR-PEPAKURA

 

[ironmansuitmk6]

how is it going with the forearms?