Army of two Second mask ever build

[surename]

Finished the pep model and added supports, that's why it looks wide, looks a bit small though.

 

[surename]

Here's the supports, I used Masking tpe to secure them in, not sure how this will work out.

 

[surename]

First coat of resin.

 

[surename]

The first one did end up being to small, so I'm peping a second.

Finished the pep

There is a considerable size difference.

 

[surename]

Added supports for Resin and Rondo, I used super glue this time since the masking tape pealed up my rondo when I tried to remove the supports. Any suggestions as to what else I could use to secure my supports?

 

[surename]

Here's a better look at how much smaller the first mask was thn the second one.

 

[surename]

Second take on the resin.

Finished Resin and let it cure, now to prep for rondo, taping the eyes so I don't have any fall out on me.

Starting Rondo.

Rondo.

My work area.

 

[surename]

Time for glass.

First layer of glass, I'm using cloth, what's your preference?

First layer done.

One of the most annoying thins about glass is when it starts to stick to your fingers, then to everything you touch.

Removed the supports with my dremel. In hindsight I should have removed them before glassing. Oh well, to late now.

Here's the front view of what I have so far.

 

[surename]

Starting bondo yaaay.

Layed it out as smooth as I could, here's what I turned out with.

Starting to sand woop woop.

Washed it down with a damp wrag. Looks and feels pretty smooth.

Primer.

Sorry for the blurry pictures.

Cleaning up some areas with spot putty, first time I've ever used this stuff, I'd recommend it to anyone doing bondo work.

 

[surename]

Finally figured out how to make this camera focus correctly.

In around the eyes is tough to get.

Places like this are also hard to smooth out, any suggestions?

Looks pretty cool with the splotches of red.

After a bit of sanding it looks pretty bad ass, I hate that I'm going to have to primer over it.

I know these are large updates, truth be told I already have the mask done, and I'm just uploading pictures as I get to them, I'll be finishing this thread today nd looking back for comments. Primer, looking pretty smooth so far.

A few nicks, but I think I'll leave them, well this is about it. Smooth as I can get it and a few nicks. Customer asked me not to paint it because he wants to do it himself, what a shame I would have fun painting this thing. Oh and this original model is by A1td and the unfold was done by mks81

 

[surename]

Second mask I've ever built*

 

[MikyVengeance]

None of your photos are working. If you're using Photobucket, use the

 

[GuitarMaster157]

Eleven posts in a row and still no pictures...

 

[surename]

That's odd I did use the

 

[surename]

I'm going to try to fix it, I think it's because I have my photobucket linked with my facebook.

 

[surename]

I figured it out, and it is now fixed. Sorry for the noob mistake, turns out I was just using the wrong code.