- Hall of Honor - Post Pics of your finished armor/weapons
- Thread starter ReheatedHeroics
- Start date
operator
New Member
yooo was this at Holiday Matsuri in Orlando?
DollarstoreDime
New Member
Yup! I was there. I know there were a few other halo guys, but I was one of the only ODSTs running around.
commanderwyro
New Member
J0sephAguilar
New Member
Here's all my builds so far. I've been experimenting with modular designs so I had some fun with the paint job.
I'll put all the links below
ODST SMG:
www.aguilarworkshop.com
www.aguilarworkshop.com
Shotgun:
www.aguilarworkshop.com
www.aguilarworkshop.com
Emile's Knife:
www.aguilarworkshop.com
www.aguilarworkshop.com
Halo 5 Magnum:
www.aguilarworkshop.com
ODST Pistol:
www.aguilarworkshop.com
www.aguilarworkshop.com
I'll put all the links below
ODST SMG:
Halo 3: ODST M7S SMG | Aguilar Workshop
Major FeaturesThreaded Barrel w/ Multiple Barrel AttachmentsThere is threading on the inside of the Halo 2 Barrel Tip (Compensator?) and the Halo 3: ODST Suppressor. I have tested it out and it screws on easily and securely. Railing System w/ Multiple SightsThe railing system is functional and...
www.aguilarworkshop.com
M7S Submachine Gun - (ODST SMG)
The suppressed variant of the M7 SMG, perfect for sneaking around the streets of New Mombasa.
www.aguilarworkshop.com
Shotgun:
Emile's M45 Shotgun | Aguilar Workshop
Seamless, Modular DesignAs you can see this model includes a lot of parts. This was done to minimize the overall supports required (as almost all of the parts can be printed support free) and make the painting and sanding process easier. This also allows this entire piece to have no ugly seams...
www.aguilarworkshop.com
M45 Shotgun - (Reach Shotgun)
A deadly CQC weapon, second only to a Kukri...
www.aguilarworkshop.com
Emile's Knife:
Emile's Knife | Aguilar Workshop
Major Features Simplistic, Support Free DesignThis is a great prop for starters. The only supports required are a minuscule amount on the inside of the handle. The blade slides into the handle and is further stabilized by the connecting rod. As with all of my props, the tolerances allow for...
www.aguilarworkshop.com
Emile's Knife - Halo Reach
"Now that's a Knife!" - Crocodile Dundee to Emile in a cross-over we didn't know we neededPerhaps the reason our precious Emile bit the dust on Reach was because he simply had one. With the magic of 3D printing, feel free to make yourself enough Kukris to take down the entire covenant...
www.aguilarworkshop.com
Halo 5 Magnum:
M6H2 Magnum | Aguilar Workshop
Major Features Modular DesignThe design of this pistol is such that most of the parts hold themselves in place without the need for glue, this allows for plenty of fun mix and matching. This is of course provided your printer is calibrated correctly. Even so a little glue never hurt once you...
www.aguilarworkshop.com
ODST Pistol:
M6C/SOCOM - (ODST Pistol) | Aguilar Workshop
Major Features Sliding ReceiverThe back half of the receiver slides back and springs forward just as it does in game. The hooks there can easily support a tensional spring or a small rubber band. The tolerances on the inside of this piece are also slightly larger to allow it to actually slide...
www.aguilarworkshop.com
M6C/SOCOM Pistol - (ODST Pistol)
For the connoisseur of stringing together Grunt Headshot KilltacularsBefore you drop into the streets of New Mombasa, make sure to bring one (or two for all you dual wielders out there) of these for optimal shieldless enemy disposal. Major FeaturesSliding ReceiverThe back half of the receiver...
www.aguilarworkshop.com
The Wolf
Member
Here's all my builds so far. I've been experimenting with modular designs so I had some fun with the paint job.
I'll put all the links below
View attachment 297694
View attachment 297700
View attachment 297695
View attachment 297701
View attachment 297696
View attachment 297699
View attachment 297697View attachment 297698
ODST SMG:
Halo 3: ODST M7S SMG | Aguilar Workshop
Major FeaturesThreaded Barrel w/ Multiple Barrel AttachmentsThere is threading on the inside of the Halo 2 Barrel Tip (Compensator?) and the Halo 3: ODST Suppressor. I have tested it out and it screws on easily and securely. Railing System w/ Multiple SightsThe railing system is functional and...M7S Submachine Gun - (ODST SMG)
The suppressed variant of the M7 SMG, perfect for sneaking around the streets of New Mombasa.
Shotgun:
Emile's M45 Shotgun | Aguilar Workshop
Seamless, Modular DesignAs you can see this model includes a lot of parts. This was done to minimize the overall supports required (as almost all of the parts can be printed support free) and make the painting and sanding process easier. This also allows this entire piece to have no ugly seams...M45 Shotgun - (Reach Shotgun)
A deadly CQC weapon, second only to a Kukri...
Emile's Knife:
Emile's Knife | Aguilar Workshop
Major Features Simplistic, Support Free DesignThis is a great prop for starters. The only supports required are a minuscule amount on the inside of the handle. The blade slides into the handle and is further stabilized by the connecting rod. As with all of my props, the tolerances allow for...Emile's Knife - Halo Reach
"Now that's a Knife!" - Crocodile Dundee to Emile in a cross-over we didn't know we neededPerhaps the reason our precious Emile bit the dust on Reach was because he simply had one. With the magic of 3D printing, feel free to make yourself enough Kukris to take down the entire covenant...
Halo 5 Magnum:
M6H2 Magnum | Aguilar Workshop
Major Features Modular DesignThe design of this pistol is such that most of the parts hold themselves in place without the need for glue, this allows for plenty of fun mix and matching. This is of course provided your printer is calibrated correctly. Even so a little glue never hurt once you...
ODST Pistol:
M6C/SOCOM - (ODST Pistol) | Aguilar Workshop
Major Features Sliding ReceiverThe back half of the receiver slides back and springs forward just as it does in game. The hooks there can easily support a tensional spring or a small rubber band. The tolerances on the inside of this piece are also slightly larger to allow it to actually slide...M6C/SOCOM Pistol - (ODST Pistol)
For the connoisseur of stringing together Grunt Headshot KilltacularsBefore you drop into the streets of New Mombasa, make sure to bring one (or two for all you dual wielders out there) of these for optimal shieldless enemy disposal. Major FeaturesSliding ReceiverThe back half of the receiver...
Both of your props/weapons are amazing!!!!!
Marty Falco
Member
The paint job is what absolutely sells this build. Looks incredible. What kind did you use because I refuse to believe you accomplished this with spray cans
Sharpworks
Member
Custom Noble 6 build completed finally 
Dan99
New Member
Sorry for the late reply but it was all airbrushed by hand! It gives the suit much more depth and realism when the green is not completely consistent.
Spiderboy196
Well-Known Member
Amaz1ngWhale
New Member
Just finished by 3D printed H2A BR55. Paint job is based off of the "Day at the Beach" trailer
N8TEBB
Sr Member
- Member DIN
- S410
I finished this months ago... but somehow I never posted in the hall of honour. It is my first ever suit of armour! It's mostly foam, but the helmet and gun are 3D printed. MK VI from halo 3
I built it over the summer of covid so I could spend lots of time on it. If you only count the days where I worked on the suit, it was built in 47 days! (from start to finish it was more like 2 and a half months)
I built it over the summer of covid so I could spend lots of time on it. If you only count the days where I worked on the suit, it was built in 47 days! (from start to finish it was more like 2 and a half months)
ParaplegicFox
New Member
After attending the Discovery Outpost back in 2019 and meeting with the 405th for the first time, and seeing all the different Spartans & ODSTs at probably the biggest Convention type event (other than MegaCon). I decided that I want to do that, I want to become a Spartan or ODST. So after signing up on here and joining a Facebook group for the Southern Regiment that's when I begun planning what I'd really want to do.
It took time before I knew what I wanted to do, so around Early-2020 is when I decided to make a ODST. Though, I can say not having the best crafting experience with armor making. I did have to buy the pieces to have my dream come true of being a ODST. But, I can say that painting everything on the armor itself is my handy work which I certainly am proud of doing. The more I look at this armor the more I love it, it was till maybe Late-November when I fully finished this amazing Cosplay.
Well, here it is. My ODST.
It took time before I knew what I wanted to do, so around Early-2020 is when I decided to make a ODST. Though, I can say not having the best crafting experience with armor making. I did have to buy the pieces to have my dream come true of being a ODST. But, I can say that painting everything on the armor itself is my handy work which I certainly am proud of doing. The more I look at this armor the more I love it, it was till maybe Late-November when I fully finished this amazing Cosplay.
Well, here it is. My ODST.
Ceruleon117
New Member
here's my Mark VI build! it began production in august 2019 and was finished January 202. it was a lot of work, but I'm honored to say it's finished!
Ceruleon117
New Member
Helmet by Justin Branfuhr.
- Member DIN
- S314
Saw your build on the spotlight! Great job!
shadowbreakre
Member
Halo Wars mark IV fully 3d printed finished back in September. Currently working on a more detailed version from Halo 5 and the Hellcat armor.
