HALO 3 PEPAKURA By Slyfo

[BDigital978]

After you are done sorting out the inside-out ordeal, I was wondering about the scale of the actual pep files. I printed out the left forearm for a quick sizing and saw it was too small. I read the Ultimate Sizing/Scalling thread, but I was wondering if the chart in that thread applies your armor. If not, would you mind giving me a little advice on scaling the armor so that I can build it proper. You would be doing me a favor if you could. Thanks for all the files and time spent on making them.

 

[cys920622]

this suit is built for someone 7 ft tall. im 5'10 and my scale is at 17.2, fits perfectly.

 

[BDigital978]

Do you mind me asking how you figured it out? I looked at the chart on the Scaling Thread and your number didn't match up with your height. My apologies if I am asking a stupid question here. Thanks for the help.

 

[cys920622]

Height---cm-------Base Scale Multiplier-----If current scale is 30.342
78-------195-------0.906976744--------------27.51948837
77-------192.5-----0.895348837-------------27.16667442
76-------190-------0.88372093---------------26.81386047
75-------187.5-----0.872093023-------------26.46104651
74-------185-------0.860465116-------------26.10823256
73-------182.5-----0.848837209-------------25.7554186
72-------180-------0.837209302-------------25.40260465
71-------177.5-----0.825581395-------------25.0497907
70-------175-------0.813953488-------------24.69697674
69-------172.5-----0.802325581-------------24.34416279
68-------170-------0.790697674-------------23.99134884
67-------167.5-----0.779069767-------------23.63853488
66-------165-------0.76744186---------------23.28572093
65-------162.5-----0.755813953--------------22.93290698
64-------160-------0.744186047--------------22.58009302
63-------157.5-----0.73255814---------------22.22727907
62-------155-------0.720930233--------------21.87446512
61-------152.5-----0.709302326--------------21.52165116
60-------150-------0.697674419--------------21.16883721
59-------147.5-----0.686046512--------------20.81602326
58-------145-------0.674418605--------------20.4632093
57-------142.5-----0.662790698--------------20.11039535
56-------140-------0.651162791--------------19.7575814
55-------137.5-----0.639534884--------------19.40476744
54-------135-------0.627906977--------------19.05195349
53-------132.5-----0.61627907---------------18.69913953
52-------130-------0.604651163--------------18.34632558
51-------127.5-----0.593023256--------------17.99351163
50-------125-------0.581395349--------------17.64069767
49-------122.5-----0.569767442--------------17.28788372
48-------120-------0.558139535--------------16.93506977
47-------117.5-----0.546511628--------------16.58225581
46-------115-------0.534883721--------------16.22944186
45-------112.5-----0.523255814--------------15.87662791
44-------110-------0.511627907--------------15.52381395
43-------107.5-----0.5-------------------------15.171
42-------105-------0.488372093--------------14.81818605
41-------102.5-----0.476744186--------------14.46537209
40-------100-------0.465116279--------------14.11255814
39-------97.5------0.453488372--------------13.75974419
38-------95--------0.441860465--------------13.40693023
37-------92.5------0.430232558--------------13.05411628
36-------90--------0.418604651--------------12.70130233
35-------87.5------0.406976744--------------12.34848837
34-------85--------0.395348837--------------11.99567442
33-------82.5------0.38372093---------------11.64286047
32-------80--------0.372093023--------------11.29004651
31-------77.5------0.360465116--------------10.93723256
30-------75--------0.348837209--------------10.5844186
29-------72.5------0.337209302--------------10.23160465
28-------70--------0.325581395--------------9.878790698
27-------67.5------0.313953488--------------9.525976744
26-------65--------0.302325581--------------9.173162791
25-------62.5------0.290697674--------------8.820348837
24-------60--------0.279069767--------------8.467534884
23-------57.5------0.26744186---------------8.11472093
22-------55--------0.255813953--------------7.761906977
21-------52.5------0.244186047--------------7.409093023
20-------50--------0.23255814---------------7.05627907
19-------47.5------0.220930233--------------6.703465116
18-------45--------0.209302326--------------6.350651163
17-------42.5------0.197674419--------------5.997837209
16-------40--------0.186046512--------------5.645023256
15-------37.5------0.174418605--------------5.292209302
14-------35--------0.162790698--------------4.939395349
13-------32.5------0.151162791--------------4.586581395
12-------30--------0.139534884--------------4.233767442


DO NOT USE THE FINAL COLUMN
but instead get your height in cm, find the base scale multiplier for it and multiply by 19.157869

 

[nocareas]

DO NOT USE THE FINAL COLUMN
but instead get your height in cm, find the base scale multiplier for it and multiply by 19.157869

I'm not sure I got it right. You are 5'10 = 177'8 cm, so your base multiplier should be something like 0.825581395, which multiplied by 19.157869 equals 15.8163802142473 instead of 17.2

Using that formula for me, that am 168 cm tall, with a base multiplier of about 0.779069767 I got a scale of 14,9253165380465, which is too small.



I'll try now doing something like the following:

If 177'8 cm (your height) -> 17.2 then 168 -> X, where X=168*17,2/177,8 = 16.251968503937.

By the way, the part I'm using for my tests is the one in the file "lower torso.pdo"

 

[Sikarian]

Bump for the updated pepakura helmet!

 

[cys920622]

I'm not sure I got it right. You are 5'10 = 177'8 cm, so your base multiplier should be something like 0.825581395, which multiplied by 19.157869 equals 15.8163802142473 instead of 17.2

Using that formula for me, that am 168 cm tall, with a base multiplier of about 0.779069767 I got a scale of 14,9253165380465, which is too small.
I'll try now doing something like the following:

If 177'8 cm (your height) -> 17.2 then 168 -> X, where X=168*17,2/177,8 = 16.251968503937.

By the way, the part I'm using for my tests is the one in the file "lower torso.pdo"

sorry i forgot to mention

look at the width, depth, length at the bottom of the PEP window.

i saw that my number was too big and took a little off, and now it seems to fit.

just hold a ruler up to your forearm and measure it, compare it with the length or whatever it is for the PEP forearm

good luck. the forearm should be the easiest to scale. then use that for everything else BUT check that the # of cm's fits your body.

 

[mbrethour]

Do you use the same scaling for these files as the Halo 2 armor files?

 

[LiveSpartan]

in pep go to 2dpattern window and select show edge id

Legend Thanks!

 

[WarHead9705]

Hey if posible could you make a ODST from Halo 3?

 

[s meisters]

kk, for those who have scaling problems this is what I did. I am using the helmet for this example and keep in mind that all the numbers are specific to me. It might take a bit but it works well.

1. Grab the Halo 2 version and use the scaling sticky to find out what number you are.
- 71 is what I had.
2. Paste the scale numbers into the "Scale" box.
- 25.0497907 is what I had.
3. Copy the numbers in the "Assembled size (height) __ cm" box.
- 26.4 is what I had.
4. Grab the Halo 3 version and insert into the "Assembled size (height) __ cm" box, whatever number you had in step 3 (for me it was 26.4).

Like I said, all the numbers are specific to me. So find your own numbers and tell me if this works ^^.

 

[Crook]

Hey if posible could you make a ODST from Halo 3?

"Helljumper/marine armor is a priority right now. I just have to get the models for them first. (Happening -soon- )"

-Slyfo

 

[Zyclone]

Ok, so i got some 3D screenshot from H3 of the EVA and CQB armors...

EVA

CQB

 

[Damien]

well, the pep version of the cqb takes out my project(CQB helm)

 

[Sikarian]

My respirator and visor arrived today, so I'd love to get started this weekend. Can anyone confirm they've made a proper helmet by just reversing the fold lines? It won't be messed up?

 

[cys920622]

need help scaling the helmet...

what angle is the height, width and depth measured from? facing forward?

and, should i be scaling down the helmet?


just because he's 7 feet tall doesn't have to mean he's got a giant head....
im measuring this against my full-face biking helmet, and at my scale (17.2) it seems a bit small (i havent built it yet, im using a ruler)

 

[s meisters]

^OMFG LOOK AT MY POST!!!!!

-EDIT-

Zyclone where did you get those? Do they have one for MC by any chance ¿?

 

[Sikarian]

I tried cutting up the pepakura in the designer to avoid the overly complicated visor.... I can't tell really what needs to be cut and what doesn't. Some of the parts on the visor seem like important parts of the helmet...plus the designer doesn't make the 3d view very easy.

Interestingly enough, there seems to be a solid thick red line around a. the neck, and B. the visor. The neck I assume is a line showing where the opening is... does the red line around the visor have anything to do with this? Lol...can I just turn OFF the visor? Somehow?



Calling out to Slyfo for the fixed pepakura!

 

[s meisters]

Btw forgive me for asking, this question sounds really dumb to me but. Where on the armour is the gauntlet located?

 

[Sikarian]

Btw forgive me for asking, this question sounds really dumb to me but. Where on the armour is the gauntlet located?

That would be the glove