Myr's ODST Build

Status
Not open for further replies.
Update for 3/26:
Finished opening the zip tie holes and nylon strap slots for all the belt pieces. And even though I'm going to have to take them apart before paint, I threw the straps and zip ties on to see how it looks.
uploadfromtaptalk1427830241057.jpg
uploadfromtaptalk1427830253059.jpg
uploadfromtaptalk1427830368844.jpg

Also finished forming and riveting the braces into the ankle guards.
uploadfromtaptalk1427830434354.jpg
uploadfromtaptalk1427830396962.jpg
 
Update for 5/6:
Yesterday and today, I bonded the calf pieces together. Not the cleanest joint, but I can sand it down and cover it up with paint and strapping.
ImageUploadedByTapatalk1430971788.006972.jpg
ImageUploadedByTapatalk1430971808.148919.jpg

So excited: this means that all the pre-paint build is done! This payday, I'm heading to the auto parts store to get paint and start turning these pieces of plastic into armor!

Just 13 weeks until RTX and the big reveal!


Sent using Tapatalk
 
looking forward to seeing it completed, I about halfway through my first build, using EVA foam, all pieces have been cut and sanded now on to painting for me as well! Good Luck!
 
looking forward to seeing it completed, I about halfway through my first build, using EVA foam, all pieces have been cut and sanded now on to painting for me as well! Good Luck!

Thanks! Same goes to you!


Sent using Tapatalk
 
Last Payday, I stopped at my neighborhood auto parts store and picked out some cans of spray paint. This (and several test scraps) is the fruit of my labor:

ImageUploadedByTapatalk1431971219.561520.jpg
ImageUploadedByTapatalk1431971230.832567.jpg

This week I'll be picking up some cans of grey and starting on the armor plates.


Sent using Tapatalk
 
Spent the day sanding, cleaning, priming, & painting. And ran out of metallic gray paint during the first coat. The store next to my house only had the one can of the color I liked. Going to have to shop around tomorrow- can't leave this job half-way done, 1 day into a 3-day weekend!

My setup:
ImageUploadedByTapatalk1432449502.808147.jpg


Sent using Tapatalk
 
Neighborhood store is still out of the Magnetic Grey Metallic I want to use (Gunmetal is too bright), & I don't exactly feel like driving from store to store on this holiday weekend. So spent today starting my rucksack build instead. I had been putting that off as something I would only do if the rest of the suit was finished in time. Looking good so far- parts are fitting together well, so I'll do the riveting tomorrow and get it ready for paint at the same time I finish painting the rest of the parts. Pics to come tomorrow.


Sent using Tapatalk
 
Rucksack parts trimmed and riveted. Side rails still need supports, otherwise ready for paint. ImageUploadedByTapatalk1432581901.043221.jpg
ImageUploadedByTapatalk1432581913.125584.jpg
ImageUploadedByTapatalk1432581920.080386.jpg
ImageUploadedByTapatalk1432581926.663795.jpg
(We're gonna need some foam...)

Sent using Tapatalk
 
For those who have done molded plastic: clear coat after the color spraypaint? Or will it look too shiny?


Sent using Tapatalk
 
More painting accomplished. Shoulder bells and chest piece half done. Then, the camo pieces and we're done painting.


Sent using Tapatalk
 
Presenting: The completed paint job for my ODST build! Granted, I still need camouflage & detail paint (belt buckle, name plate, etc), but this will do for its first outing at RTX. So excited to put it all together...
ImageUploadedByTapatalk1433398381.659057.jpg
ImageUploadedByTapatalk1433398429.279363.jpg
ImageUploadedByTapatalk1433398438.101342.jpg
ImageUploadedByTapatalk1433398446.685826.jpg


Sent using Tapatalk
 
Spent today strapping the boot cover on, riveting the shin plates together, and cutting the straps for the belt plates (sewing has to wait until my GF can help). Need to pick out what pants I'm going to wear under this armor so I can size up the straps for the leg armor. Still, a pretty productive weekend. Only a few of these left before RTX!
ImageUploadedByTapatalk1433665558.539762.jpg
ImageUploadedByTapatalk1433665568.493653.jpg


Sent using Tapatalk
 
Ordered a BDU to wear under the armor; should arrive early next week. In the mean time, continued strapping pieces- this time the thighs.
A couple pieces need detail paint (paint rivets to match surroundings; buckles will be silver), but that can be fixed after the build is complete if there's time before RTX. Later I'll paint the thigh pieces camo to match in-game models.
ImageUploadedByTapatalk1434007247.527487.jpg


Sent using Tapatalk
 
Gauntlets are way too big. Going to wait until I get the BDU to see how much I'll need to trim.
ImageUploadedByTapatalk1434185088.373602.jpg
ImageUploadedByTapatalk1434185102.780422.jpg

Finished riveting & strapping the chest and back pieces together. Everything is safety pinned until I get the BDU to try on. Going to start the shoulder straps next.
ImageUploadedByTapatalk1434185120.973012.jpg
ImageUploadedByTapatalk1434185130.279396.jpg

So exited how quickly it's coming along.


Sent using Tapatalk
 
Status
Not open for further replies.
Back
Top