Steampunk combat suit
- Thread starter lordtosco
- Start date
- Status
Hi guys!
Well, did not get a buckle ready to solve my problem closing the straps of the vest. Then I lost my patience and I look 2 here in fright.
Pieces of a shelf barred some display bakery or something.
Cutting it in half and wiping the ink
I have it
Cleaning the white bars have it
Cutting this plate (softer) have the tips of the buckle closure
Leveraging a supporter of brake lining
I can take the plate using a drill in the right places (solder points)
Then shoot the pieces to assemble the clamp buckle
Assembling the pieces
Continue...
Well, did not get a buckle ready to solve my problem closing the straps of the vest. Then I lost my patience and I look 2 here in fright.
Pieces of a shelf barred some display bakery or something.
Cutting it in half and wiping the ink
I have it
Cleaning the white bars have it
Cutting this plate (softer) have the tips of the buckle closure
Leveraging a supporter of brake lining
I can take the plate using a drill in the right places (solder points)
Then shoot the pieces to assemble the clamp buckle
Assembling the pieces
Continue...
After the solder and clip set
With that fixed the piece in place to use
For fixation of the shoulder joint
A bearing belt
Soldering a bezant to fix a screw (Do not know if I translated right)
Use this leftover cut another piece as a prop to support the joint
Bolt, washer and nut closing
subassembly
Continue...
And some pictures with all the pieces in place
As I anticipated the shoulder joint due to lack of regulation away does not work well. So I made some adjustments "adjustable".
The support of the shoulder joint is not giving enough adjustment for a move reasonably fluid. Then cut a piece and adapted a regulation.
Parts
This pin is part of the bearing assembly of a belt of any car.
Making a hole and threading the pin
A bar removed from a old xerox machine will serve as a guide
Continue...
As I anticipated the shoulder joint due to lack of regulation away does not work well. So I made some adjustments "adjustable".
The support of the shoulder joint is not giving enough adjustment for a move reasonably fluid. Then cut a piece and adapted a regulation.
Parts
This pin is part of the bearing assembly of a belt of any car.
Making a hole and threading the pin
A bar removed from a old xerox machine will serve as a guide
Continue...
Other 2 pins are welded on a piece of the bar to be the guides of regulation
With two guides ready pay the tip of the support joint
And soldering the pins with bolts and fixing the tip stuck in
Then have the same result but with the possibility of adjustment in size. (The slack is how I took the support to be able to create the regulation distance).
With this operation can greatly improve the assembly
I made a little video with the phone (very bad) to illustrate the functioning of the joints together.
www.youtube.com/watch?v=EJo2IEE56S4&feature=youtu.be
There are still many adjustments but "slow and steady".
With two guides ready pay the tip of the support joint
And soldering the pins with bolts and fixing the tip stuck in
Then have the same result but with the possibility of adjustment in size. (The slack is how I took the support to be able to create the regulation distance).
With this operation can greatly improve the assembly
I made a little video with the phone (very bad) to illustrate the functioning of the joints together.
www.youtube.com/watch?v=EJo2IEE56S4&feature=youtu.be
There are still many adjustments but "slow and steady".
killerownz11
Member
I'm watching this very closelly. I love when suits are made from material that can actually be used for something in the real world. Now we just need halo suits made perfectly with metal like this 
I'm watching this very closelly. I love when suits are made from material that can actually be used for something in the real world. Now we just need halo suits made perfectly with metal like this
Thank you for the compliment.
I think quite possible to make armor of these HALO steel, so would need a torch, some hammers, an anvil and metal plates of 3 mm. The rest a little kevlar we solved
Think green LEDs, liquid filters with internal lighting, green laser (tracer) in one eye, a flashlight chest, metal fans (if possible) and if I have the equipment and knowledge necessary, an electric arc along the metal parts as a frankenstein
Hi Guys !
Adding the bar pneumatic front
With a tip of a steering bar welded on edge buffer that was already done I'm closing the front linkage arm
Here weld was made
This piece and a piece I cut another piece (the left side of the vest)
With everything in place have this result
Another video (low quality)
Adding the bar pneumatic front
With a tip of a steering bar welded on edge buffer that was already done I'm closing the front linkage arm
Here weld was made
This piece and a piece I cut another piece (the left side of the vest)
With everything in place have this result
Another video (low quality)
Last edited by a moderator:
Very, very, very creative work you've got going here. I am loving the results so far.
Thanks man ! The work is slow, but is need to guarantee a good result. I so sorry for the slow updates
- Status
