Templar 320
Member
We need more Jun reference pictures!!!!!!
Chevysrule's 3D Models
- Thread starter Chevysrule
- Start date
- Status
Chevysrule
Member
Templar said:
I know right! Not just for Jun, but for nearly everything Reach-related!
I have a very, very horrible (in my opinion, some people might like it, for a size tester, at least) shin file completed... It ended up being one of those things that I finished just to get out of the way. A picture will be up sometime.
Until then, it is up for download at: http://www.4shared.com/file/240804813/9369a215/Reach_Lower_Leg.html
The Fuel Rod Gun has been improved some, but it's a slow progress. I have also abandoned the Jorge helmet and Sniper Rifle (because people have released ones that are much better than what mine would be). My current projects are the Fuel Rod Gun, Reach Marine (or Army, I don't know which) helmet, and some lesser ones that are unimportant to name (mainly because very little progress has been made on them).
Last edited by a moderator:
Chevysrule
Member
Would anyone out there be kind enough to upload some hi-def pictures of this plane:
It is the one that is crashing on "The Ark" mission of Halo 3. I do not have Live, or else I wouldn't be asking this. If whoever can could get a picture of the bottom, front, back, and top, preferably as straight and direct as possible, I would be much obliged. To get those pictures in theater mode, when the plane is flying over the large open area, it is possible to free roam over there to get each view from one paused point.
It is the one that is crashing on "The Ark" mission of Halo 3. I do not have Live, or else I wouldn't be asking this. If whoever can could get a picture of the bottom, front, back, and top, preferably as straight and direct as possible, I would be much obliged. To get those pictures in theater mode, when the plane is flying over the large open area, it is possible to free roam over there to get each view from one paused point.
Chevysrule said:Would anyone out there be kind enough to upload some hi-def pictures of this plane:
It is the one that is crashing on "The Ark" mission of Halo 3. I do not have Live, or else I wouldn't be asking this. If whoever can could get a picture of the bottom, front, back, and top, preferably as straight and direct as possible, I would be much obliged. To get those pictures in theater mode, when the plane is flying over the large open area, it is possible to free roam over there to get each view from one paused point.
in google sketchup's model wearhouse there are some modles for this particular aircraft. you could try just taking snapshots of those either that or
maybe you can hook up a camera to your tv and play back a video and record muiltiple angels and take it into photoshop on your pc or something and edit or whatever... sorry for the misspelled words.
Last edited by a moderator:
Spartan 051
Well-Known Member
there is no need to model that one you can get a ripped from halo 1
Chevysrule
Member
gakkengod said:
I completely forgot to look there! Now I have some models for reference, thank you.
Spartan 051 said:
I know, it's just that I want something to work on when I get bored. And at the end of the day, it feels better knowing I made the model, rather than just ripped it from the game
. Thank you though, for the help.
Last edited by a moderator:
Chevysrule
Member
rvb18 said:
Thank you for the name of it. (That narrows my image search way down
)So, I figured I would throw in some pictures of what I've been working on:
A little bit more done on the Fuel Rod Gun, but it has lots of work left.
And one of the chest attachments, though I don't know its name.
Its the piece going from the stomach upward. Tell me of any problems visible from that picture, and as I work I will fix them.
Last edited by a moderator:
Boba Fett
Well-Known Member
well, the outside edges should not be flat, rounded (on the ends, where it goes off on either side.) It's the 3-sided thingy... whatever. LOVE THE FUEL ROD! Thhose things are bad-@$$... On legendary today , I took down 2 hunters in 3 shots. The level Regreat... How the HECK did I beat that?
Chevysrule
Member
Boba Fett said:
Yeah, I hadn't got to that part yet. Thank you, and yeah, it is a pretty fun weapon. Maybe you took them down by hitting them in between their armor?
Better much? Not ready for release, yet, because I have the upper half to do still. I just have to go back and find a reference picture.
EDIT: I need a second opinion. Does it look like that piece is complete, or is there more of it being covered up? (the actual picture is in post #88)
Last edited by a moderator:
Boba Fett
Well-Known Member
I think it's cool as-is. The fuel rod just owns, it hits and, and the enormous splash damage kills those beasties. Fuel-rod is the best anti-hunter weapon, followed by the sniper in between the plates. In CE though, the shotty took them down like crazy. and of cousre theat pistol...
Chevysrule
Member
Boba Fett said:I think it's cool as-is. The fuel rod just owns, it hits and, and the enormous splash damage kills those beasties. Fuel-rod is the best anti-hunter weapon, followed by the sniper in between the plates. In CE though, the shotty took them down like crazy. and of cousre theat pistol...
Alright. Yeah, one time on Halo 3 an ODST saved me by shooting one in the back (it died just before its big arm-shield thing hit me). Every weapon, when used properly, can be pretty amazing in my opinion.
I guess I will release the the attachment piece.
Download here, format is .3ds: http://www.4shared.com/file/256211467/d600c6ef/Reach_Chest_Add-On.html
Last edited by a moderator:
Chevysrule
Member
Boba Fett said:
Thank you! And yes, I must admit I am getting a little better at it (and I noticed I can make new things faster than I used to).
Jay123way said:
Thank you too! How's this looking for somewhat-future work?
Semi-Powered Infiltration Armor, bicep. Work in progress, with some things to add, others to fix.
I added that "somewhat-future work" part in because Bungie just released some pictures of the Reach weapons. That being said, you all can expect a break in the work on the SPI armor, but a likely release of some new weapons.
Last edited by a moderator:
Chevysrule
Member
Tyvern said:
Trying is the more appropriate word.
rvb18 said:
Thank you, I need all the reference I can get.
I finished the bicep (but forgot a picture). It's one of my more mediocre creations, in my opinion. By the way, it is a compilation of all the references I could find, so some things on it are features that other references may not have.
Link: http://www.4shared.com/file/Es8Zmiu_/SPI_Bicep.html
Last edited by a moderator:
ratchet fan
Member
hey Chevysrule! what your doing is amazing! think you could remake the Reach Eva helmet to a more HD one? i would myself but you are way better! plus i cant find one anywhere else and i dont know how to use blender...
Chevysrule
Member
ratchet_fan said:hey Chevysrule! what your doing is amazing! think you could remake the Reach Eva helmet to a more HD one? i would myself but you are way better! plus i cant find one anywhere else and i dont know how to use blender...
I will add it in to the to-do list, but I can't make any promises. I am in the middle of a big English project, and the Reach Beta is coming out soon. I also have my Missile Pod being restarted, so I am going to have to dedicate most of my free time to it. It's a rough schedule, but if I find the time I can try to get some work on it done.
Last edited by a moderator:
- Status
