File it under Crimmson

Status
Not open for further replies.
Hmmm, not sure why it wouldn't? Have you checked out the Rigify tutorial video by CG cookie? I know it took me 4 or 5 tries before I got the Halo 5 Male Under suit to work. A few problems may occur with the layers, or with some of the rotations with the finger joints not be lined up properly. By lined up, I mean the rotations of the finger bones. Also, in pose mode. If you start messing with switching things from FK, and IK movements that can gets things out of whack. So you just got to remember what you switched, or things just want pose right.
SavedbyGraceG12 after beating my head with my good arm I think I figured it out. I was trying to rigify with the armor on and in place instead of parenting it afterwards

I really love the community here on 405 so I tried to unfold the Iron Companion Hood from Destiny.
https://www.4shared.com/file/HcBQnGOyba/Iron_Companion_Hood_By_Achylon.html
If this link works please tell me what you think.
Archylon thank you very much

crimson sad to hear that I was out four three weeks do to a sun burn that got out of hand still pilling skin off places and it's still dark red around my feet.
foxleader sunburns have got to suck, luckily I don't sunburn

Hey Crimson! Talking about Destiny files, I saw you made one for the Titan and Warlock VoG helmets, but have you/are you thinking of working on the Hunter one as well?
goboy3133 do you know the name of the helmet in question



currently I am working on the sparrow, hellcat armor from h5 and learning unreal engine 4. I am going to see what comes out of it.
 
Last edited by a moderator:
hello peoples,


here is the hellcat armor minus the helmet. it will be done today or tomorrow, but right now I am getting ready to take my girls to the water park. I will just sit there and hope I don't get kidnapped by peta.
the chest kicked my butt for a while. I could not find the extra vertices and faces, so I selected all by trait, loose and non manifold still nothing, so I searched one face by face for 4 days, did I mention it took me
4 days extra on top of getting the chest manifold. so if you find anything wrong please let me know asap. I use pepakura to check my work for extra faces as it will tell you if you have loose or extra geometry but
it wont show where they are located, fun. fun fun
helmet not done
hc%20helmet.jpg


chest not unfolded
hc%20chest.jpg
http://www.mediafire.com/download/bzyqg72nc2c1n23/halo_5_hellcat_chest_v2.obj

shoulder not unfolded
hc%20shoulder.jpg
http://www.mediafire.com/download/gpqevcwmm1v5nlc/halo_5_hellcat_shoulder.obj

forearm not unfolded
hc%20forearm.jpg
http://www.mediafire.com/download/saxa46qijcfap68/halo_5_hellcat_forearm.obj

hand plate not unfolded
hc%20hand%20plate.jpg
http://www.mediafire.com/download/c2f7iw8qls7pps6/halo_5_hellcat_hand_plate.obj

butt plate armor
hc%20butt%20plate.jpg
http://www.mediafire.com/download/3ps59f9rpa1oe1c/halo_5_hellcat_butt_plate.obj

thigh armor not unfolded
hc%20thigh.jpg
http://www.mediafire.com/download/y3h579v9fvfhqlb/halo_5_hellcat_thigh_armor.obj

shin armor not unfolded
hc%20shin.jpg
http://www.mediafire.com/download/yk5btzq4tmkycgy/halo_5_hellcat_shin_armor.obj

boot not unfolded
hc%20boot.jpg
http://www.mediafire.com/download/pu570hd4kl0qa8g/halo_5_hellcat_boot.obj


my shoulder is better but my right thumb index and middle finger go numb whenever they feel like it. normally I find out because I am holding some thing and it falls out of my hand, it has happened with drinks. too much fun.
yeah.
 

Attachments

  • hc%20butt%20plate.jpg
    hc%20butt%20plate.jpg
    60.6 KB · Views: 266
Nice work [MENTION] Crimmson[/MENTION] as always! When I'm done getting the Archilles armor Unfolded I'll start on the Hellcat armor. I'll let you know if I find any issues with the torso.:cool
 
Awesome work man!!! That armour looks like it was fun to do! I might need to add that to the list though, it does look epic as!
 
Nice work Crimmson as always! When I'm done getting the Archilles armor Unfolded I'll start on the Hellcat armor. I'll let you know if I find any issues with the torso.:cool
@SavedbyGreaceG12 thank you

Awesome work man!!! That armour looks like it was fun to do! I might need to add that to the list though, it does look epic as!
Daschlenn thank you , it is awesome but I classify it a level 10 hard or expert or extremely patient.

nice work... ur the boss lol
Shonen no I am not the boss, if I was I would have completed this.......
Halo_5_Guardians_Concept_Art_DivingSuit_Final.jpg
but sadly I have restarted the helmet alone 5 times already and I keep deleting it and starting over oh well I did restart the srl sparrow from destiny many times in multiple days. it looks deceptively simple, as in simple shapes as sphere and extrusions but nope fail sauce. I do wish it was in game as I absolutely love the design.



here is the hellcat helmet, it has many small faces and back cuts, but I like a lot. next I probably will do the recluse or the teishin don't now yet. trying to catch up on the halo stuff
hc%20helmet%202.jpg

hc%20helmet%20side.jpg

hc%20helmet%20rear.jpg

not unfolded
http://www.mediafire.com/download/18hva09hay6tgd0/halo_5_hellcat_helmet.obj
 
Unfolds for the Hellcat boot, and hand plate have been uploaded to the File Archive, to anyone who is iterested.

Chest will probably be finished last. Its Unfolded just need to the editing in the 2d menu. Gonna be a lot of work left to do on it.
Untitled.jpg

- - - Updated - - -
 
Unfolds for the Hellcat boot, and hand plate have been uploaded to the File Archive, to anyone who is iterested.

Chest will probably be finished last. Its Unfolded just need to the editing in the 2d menu. Gonna be a lot of work left to do on it.
View attachment 31449

- - - Updated - - -
SavedbyGraceG12 thank you for unfolding these and anything else I think it probably be at 5o(I kept staring at this number thinking hey a lower case zero when did they put that on my key board) plus pages. that set is a really nice set. that chest armor was a lot of fun to make it manifold, but it looks really sanzy. I would love to able to 3d print that chest armor but in sections not sliced. I am starting on the shinobi set right now. that helmet will have to grow on me though. the teishin set looks nice but the geometry is really weird. in example when I hit alt j to convert tris into quads I would have to straighten out each face and when I did it started changing the look of the chest.
 
Last edited by a moderator:
Crimmson Your welcome bro. Thank you for getting some files ready. Hopefully people will start using these. I need more variety, you just don't see many people tackling some of the newer armors. Its funny I was kinda eyeballing the Shinobi armor yesterday, thinking that would be a cool armor to bring to life. Also, I agree with you on the Shinobi helm. I think its just the ear thingys sticking out on its sides that trowing it off. Maybe make them detachable, that way the assembler has the option of whether or not they would like to keep them. One more thing, did ya get a PM from me the other day?
 
Last edited by a moderator:
Crimmson Your welcome bro. Thank you for getting some files ready. Hopefully people will start using these. I need more variety, you just don't see many people tackling some of the newer armors. Its funny I was kinda eyeballing the Shinobi armor yesterday, thinking that would be a cool armor to bring to life. Also, I agree with you on the Shinobi helm. I think its just the ear thingys sticking out on its sides that trowing it off. Maybe make them detachable, that way the assembler has the option of whether or not they would like to keep them. One more thing, did ya get a PM from me the other day?

SavedbyGraceG12 are you asking about the h4 mc back detail. I tried and it looked like crap. I mean bad, to the point I rage quit that day. the shinobi helmet I did it as you asked, the ears are separate as well as the horn. then I re did it and attached everything back on.

not unfolded

helmet
helmet%20horn%20un.jpg
http://www.mediafire.com/download/46ds7vguu82hi03/halo_5_shinobi_helmet_armorv2.obj

this version is manifold
http://www.mediafire.com/download/j68h0mxjda30k2z/halo_5_shinobi_helmet_armor_v3(2).obj

chest
chest.jpg
http://www.mediafire.com/download/ktr4kkbr8tut20h/halo_5_shinobi_chest_armor_v2.obj

shoulder
shoulder.jpg
http://www.mediafire.com/download/1h2gysyh7uu1c70/halo_5_shinobi_shoulder_armor.obj

forearm
forearm.jpg
http://www.mediafire.com/download/f6axyg650i5an5c/halo_5_shinobi_forearm_armor(2).obj

buttplate
butt%20plate.jpg
http://www.mediafire.com/download/8ci66jv1csttec3/halo_5_shinobi_butt_plate_armor.obj


thigh
thigh.jpg
http://www.mediafire.com/download/wk94odae780ipj0/halo_5_shinobi_thigh_armor.obj

knee
knee.jpg
http://www.mediafire.com/download/pxaniidl02eb4ho/halo_5_shinobi_knee_armor.obj

shin

shin.jpg
http://www.mediafire.com/download/tmgf1ygxjr1gasp/halo_5_shinobi_shin_armor.obj


boot
boot.jpg
http://www.mediafire.com/download/72t5421dcjyo6fx/halo_5_shinobi_boot_armor.obj

from here I am going to do a request of destiny armor


edit: dang it I forgot some pics and good luck on your builds
 
Yes sir, that is what I was referring to. Its all good though, thanks for at least taking a crack at it! Also that should be good for now, the rest of the Hellcat armor, and the Shinobi armor should keep me busy the next fews days with unfolding.

And again to anyone interested, Hellcat armor parts Unfolded as follows: booty plate, shin, forearm, boot, and hand plate. Unfolds can be found in the File Archive.
 
All I can say is wow! Your work is awesome and has me running like a kid in a toy store. I can't decide which armor to try. Keep up the good work.
 
All I can say is wow! Your work is awesome and has me running like a kid in a toy store. I can't decide which armor to try. Keep up the good work.
eric draven thank you. I wish I had the time, oh wait I do but I am messed up, narf

does anyone know if those files or any can be made for 3d printing ?

- - - Updated - - -

hey man was wondering if you had any 3d print files for any of the destiny stuff that ive been looking like crazy for
Costarican man oh man I wish these were ready for 3d prints. I purposely remove and simplify the files to be easier to pep in cardstock. most of the extrusions I remove as they can be made easier with foamies and balsa wood. sorry.



also I cant get access to the destiny stl generator site. I don't know if it is on my side or the site is wack. either way I have no access.
 
Last edited by a moderator:
goboy3133 do you know the name of the helmet in question

Hey Crimson! The helmet I'm talking about (The Hunter VoG Helmet) is the Prime Zealot Helm.
This is the one I'm referring to (hopefully this works): [ ATTACH=CONFIG]31599[/ATTACH]
 

Attachments

  • TTK_Prime_Zealot_Helmet.png
    TTK_Prime_Zealot_Helmet.png
    1.7 MB · Views: 402
Last edited by a moderator:
I too have torn my rotator cuff and dislocated my shoulder. I was stubborn and kept using it so it took a while to heal. lol. Hope your recovery goes well.

Was that Destiny Trials of Osiris Helm of the Exile/Golden bull Titan helmet ever finished? I have recently been looking for one to make in either foam or Pep.
 
I'll start working on the unfold for Lockes helm today. Like I said, I'm not currently doing Unfolds. But, this one is one I definitely do!
 
uploaded these to the file archive

h3 odst characters, mickey, dare, sergeant, dutch, Johnson, romeo and drop pod
[url]http://i1320.photobucket.com/albums/u534/crimmson76/h3odstcharacters.jpg[/URL]

all of the odst back packs are included
[url]http://i1320.photobucket.com/albums/u534/crimmson76/h3odstcharactersback.jpg[/URL]

Dare
[url]http://i1320.photobucket.com/albums/u534/crimmson76/h3odstDare.jpg[/URL]
I know someone here was looking for this, just don't remember who

these are all raw files only.

copyright Microsoft, bungie

Hey, Crimmson do you happen to still happen to have the assets from Halo 3 ODST as im trying to build my girlfriend a Dare suit and am missing her assets.

Cheers for all the work.
 
Hey Crimmson, was wondering if i could get you to take a look at an armor set. It's the Titan Queen's Guard armor from the event that ran about a month after release. If you could maybe model the armor that would be awesome. I'll make sure to include some reference pictures.
queens_guard_helm.pngQVIsAPO.png
 
Status
Not open for further replies.
Back
Top