teckno viking
New Member
Outstanding work I`d certainly wear it 
Jason
Jason
Mb's Odst Build.
- Thread starter tomcuthbert
- Start date
- Status
JediStumpy
Well-Known Member
Nice work on the forearms! I seem to get in that kinda of "slump" too: work on one thing for a month to get it prefect. Even if you say they are not prefect, I think the amount of detail you have put into them is outstanding! Keep up the good work! And if you can send some warm weather up North could ya?
Wow! Everything is looking great! The gauntlets look outstanding; the details really add to it!
Will the stomach pieces be angled to follow the contour of the midsection (where the sides are slightly angled back from the middle piece)?
You could also try casting the midsection in flexfoam if it doesn't provide as much mobility as needed.
Will the stomach pieces be angled to follow the contour of the midsection (where the sides are slightly angled back from the middle piece)?
You could also try casting the midsection in flexfoam if it doesn't provide as much mobility as needed.
tomcuthbert
Jr Member
thanks for the comments, guys.
i am going to do some test pulls of the stomach armor to make sure they fit right. the belt buckle and cod will be made seperately from the three stomach parts. when you have the chest and backplate on and the chest palte sits on top of that. the stomach parts should fit nicely under it.
if the vacform does not look good, then i will make them out of fiberglass or the foamflex it. but foamflex it ain't cheap.
i am going to do some test pulls of the stomach armor to make sure they fit right. the belt buckle and cod will be made seperately from the three stomach parts. when you have the chest and backplate on and the chest palte sits on top of that. the stomach parts should fit nicely under it.
if the vacform does not look good, then i will make them out of fiberglass or the foamflex it. but foamflex it ain't cheap.
I know this is a bit off topic... But, you should TOTALLY get this T-Shirt:
Description on Bungiestore:
"B.U.N.G.L.E." Pro T-shirt
• Helmet Not Included***
• 100% Preshrunk Cotton
• Port & Company
*** Not included but you got one!!!
http://www.bungiestore.com/B.U.N.G.L.E.-Pro-Tshirt-Mens/M/B002XQ45VE.htm
Description on Bungiestore:
"B.U.N.G.L.E." Pro T-shirt
• Helmet Not Included***
• 100% Preshrunk Cotton
• Port & Company
*** Not included but you got one!!!
http://www.bungiestore.com/B.U.N.G.L.E.-Pro-Tshirt-Mens/M/B002XQ45VE.htm
tomcuthbert
Jr Member
that is pretty bad ass!!! thanks for the link.
A Guardian
Well-Known Member
Pretty awesome, i just hope my E.O.D and Recon come out at least half as well.
Ronster said:
Mr. Bungles name or...
"Bungie Ultimate Ninja League Gaming Extreme!"
MrBungle! I got your Helmet today, there are no words to express appreciateon I have for you, this prop is just mindblowing... I wont even try to explain, ill let the pictures do the talking (although your surrounded by helmets
). Thank you so much, your fantastic, thank you with all the love in my heart (in a none explicit way) 
I even got stickers!
Seriously, this is one of those "see-it to believe it" things, the helmet looks even better in real life. Even Super-hi-def images cant get out the best of the helmet it's fantastic... Now, where did I leave my dremel?
THANK YOU!!!!!!!!!!!!!!!!
Last edited by a moderator:
tomcuthbert
Jr Member
thanks, man. i am glad you like it. the helmet requires alittle clean up but nothing major. thanks for the support and get that thing painted up!!!!
tomcuthbert
Jr Member
nice job, man. and fast too.
Whoa, you didn't waste any time Kodorei. Nice job!
Oh and I don't mean to threadjack, but since this question is specific to this helmet I thought I would ask it here...if anyone has any success/ideas for internal padding please let me know. I was thinking something snug -like the cheek pads on a motorcycle helmet.
Oh and I don't mean to threadjack, but since this question is specific to this helmet I thought I would ask it here...if anyone has any success/ideas for internal padding please let me know. I was thinking something snug -like the cheek pads on a motorcycle helmet.
RisingZan said:
Motorcycle padding will work great, that's what I used for my Bungle helmet.
Or you can do what Sean explained in his Tutorial:
http://evilmonkeystudios.net/seans_odst_helmet_kit.html
Last edited by a moderator:
RisingZan said:
I'm planning on using motorcycle padding for mine.
There's a whole thread on it here:
http://405th.com/forums/index.php?showtopic=16593
Last edited by a moderator:
tomcuthbert
Jr Member
i got everything from the cod piece and up finished except the backpack (which i am in no hurry to get to right now). now i am getting ready to mold everything. i have to make molds for the guanlets,hip plates , side plates, , backplate and the buttplate. rube gave me expressed permission to make cast of his buttplate, so there is one less thing i have to do. THANK YOU ,RUBE!!! i am making vacform bucks for the stomach parts ,cod and belt buckle. they are the smallest parts and it is easier to vacform than to cast from fiberglass.
i have a test pull of the stomach parts. i want to make them one piece like in the pic. in the pic is the side plates and the hip plate.
here are the finished gauntlets. i have to add four small screwes and they will be done for real!!!! i have worke on these things so much that if i continue to work on them they will start to fall apart. so time to mold them up. they are not perfect but once they are painted black or gunmetal grey ,any minor imperfections will be hard to see. but i am happy with them.
i have a test pull of the stomach parts. i want to make them one piece like in the pic. in the pic is the side plates and the hip plate.
here are the finished gauntlets. i have to add four small screwes and they will be done for real!!!! i have worke on these things so much that if i continue to work on them they will start to fall apart. so time to mold them up. they are not perfect but once they are painted black or gunmetal grey ,any minor imperfections will be hard to see. but i am happy with them.
XxCALIBERxX
Member
That is a mad amount of detail! Absolutely crazy! Looks Great!
Cheers, Dave.
Cheers, Dave.
HOLY CRAP! No offense MB, but your work is sick up the shiznet (lol)! Great job on the suit so far, and this may be a bit bold of me to say, but since RUBE, a new master of the ODST has tookin over! I cannot wait to see this thing done, great job, and keep up the fracken amazingly insane, edge of my seat, intense, OMG WAS THAT JUST SUPERMAN work!!!!!!!!!!!!
- Status
