Mark VI high-def foam armor WIP

Status
Not open for further replies.
If you're in Canada, I find that plasti-dip is not readily available (can't find it in hardware store)... so it's be great to have an alternative that works just the same.

Piston ring is quite the big supplier of plasti-dip. You can find plasti-dip spray or regular in any piston ring location. Hope this helps... :)
 
All my parts are put together WOOOOOHOOOOO
Only thing left now is painting everything and maybe putting a better visor in the helm.
I redid the left forearm and took video footage of the process. I have the first video up on my squidoo page showing how I cut my shapes. More videos are coming, I have to edit them down for size first. www.squidoo.com/how-to-make-halo-armor
Here is the completed piece
Picture2486.jpg

Picture2485.jpg
 

Attachments

  • Picture2486.jpg
    Picture2486.jpg
    41.4 KB · Views: 178
  • Picture2485.jpg
    Picture2485.jpg
    33.5 KB · Views: 176
DUDE!!! you make it look so easy!!! I am NOT having the same amount of skill coming out of mine.... :(

(returns to squidoo.com)
 
Tutorial update
I posted the next tutorial video on my squidoo page, it shows how I do mountain folds. Follow the link in my sig.
Next up will be how I form the piece with a heat gun to get the nice round shape. Converting video and uploading takes abit, have patience
 
wow!!! this looks amazing, i really like the MC helmet man, keep up the fantastic work and i can't wait to see more :D
 
Thanks for the kudos. The tut vids are on hold as I am off to go paint the rest of the suit, we should have some pics up by tommorow, see how far we get with it.
I like the MC helm too, so I made one for my dog! Enjoy
Picture2515.jpg

Picture2517.jpg

Picture2516.jpg

Picture2524.jpg

Picture2530.jpg
 

Attachments

  • Picture2516.jpg
    Picture2516.jpg
    27.9 KB · Views: 178
  • Picture2517.jpg
    Picture2517.jpg
    31.6 KB · Views: 165
  • Picture2515.jpg
    Picture2515.jpg
    38.3 KB · Views: 170
  • Picture2524.jpg
    Picture2524.jpg
    75.8 KB · Views: 179
  • Picture2530.jpg
    Picture2530.jpg
    70.7 KB · Views: 181
This looks awesome man! Way cleaner than my foam build is going. My only question is, how did you make your templates? I simply cut out the low def templates, and am essentially making the pep files, but you look like you used much migger pieces. Any way you could post up your templates to help fellow foamers out? Thanks!
 
This looks awesome man! Way cleaner than my foam build is going. My only question is, how did you make your templates? I simply cut out the low def templates, and am essentially making the pep files, but you look like you used much migger pieces. Any way you could post up your templates to help fellow foamers out? Thanks!

My templates are the same as yours I simply join the paper shapes together where I dont want a glue seam and try to have exposed edges either where there is a definition line or raised ridge detail. I find that I am modifying the foam shapes afterwards anyway so the patterns are just a guide for the basic armor shape. Improvise on the spot, this is a creative process, is all I can recommend at this point. Now that I have a suit made I might make some proper patterns and do up an instruction guide, it's on the bucket list anyway.
 
Awesome, thanks for the quick response! I'll try that on my other pieces. Right now I just have the chest armor all cut out and started. Do you think, as long as I level out all the edges, that my chest should still come out looking alright after the plastidip is applied? I have some spot putty at home too I could apply just before the plastidip. Obviously, I won't get the same smooth curves that you have in the chest piece, but I may be able to salvage it still. Thoughts? Thanks again!
 
I made my first piece like that, the left forearm, each pep shape cut out and glued together and it turned out OK, but again, I have a perfectionist problem, so I wasn't happy until I had no visible seams, like the new left forearm I made.

*UPDATE*
The suit is nearly done, just the helm and the undersuit need to be completed. I have a photo gallery up on my squidoo page, look for the stage 6 armor gallery www.squidoo.com/how-to-make-halo-armor
Here's how it looks so far
Img00021213.jpg
 

Attachments

  • Img00021213.jpg
    Img00021213.jpg
    34.4 KB · Views: 174
Awesome! Your kit just looks phenomonal! I would never guess that it was the same material as what's sutting on my dorm room floor. I like the spacers you used under the shins! I can't tell in the pic, but did you add the plungers to the midsection of the boots as well, or did you leave them as just foam? Looking great though! Can't wait to see the helmet and undersuit completed!
 
The boots have only foam, for the spacer I burned the grooves in with a larger tip on the wood-burning tool. For the toe-caps we used hammered black spray paint and drybrushed hammered steel. They came out very nice
Picture2683.jpg

Picture2684.jpg
 

Attachments

  • Picture2683.jpg
    Picture2683.jpg
    49.2 KB · Views: 186
  • Picture2684.jpg
    Picture2684.jpg
    56.9 KB · Views: 170
that actually ended up pretty hi-def, also, you could improve the visor, and paint the insides, and edges. I see a little bit of white creeping out, and a barely noticeable green line around the visor.
Great work, i am definately going to do my codpiece in foam now.
 
Yes, I forgot to mention that, I will be painting the insides and edges black, adding padding, and a proper visor is on the way!
 
Yes, I forgot to mention that, I will be painting the insides and edges black, adding padding, and a proper visor is on the way!

Don't forget we still need to add LED's and a fan to the Helm. OH... and perhaps LED's for the Chest too!
 
Status
Not open for further replies.
Back
Top