SavedbyGraceG12
Well-Known Member
Any word on the BR getting unfolded. Jut curious, no rush. Thanks.
File it under Crimmson
- Thread starter Crimmson
- Start date
- Status
Crimmson
Well-Known Member
I honestly have no idea, I know Blertz was looking at it but I had to fix some things on it. I did and re-uploaded it but I haven't seen any word on whether or not any one is going to. actually I really don't get much, to none at all, feed back on the models I upload.
Crimmson
Well-Known Member
Let me take a look at it first before I say yay or nay. I am currently working on this which is about 45 percent done.
this is the inside of the model with about 85 percent of the unneeded faces deleted. I go back to work on Thursday so I don't have that much time left.
BlertZ
Active Member
I know that you don't really have to do the Rocket Launcher since I already did it. If you want to go over it. It's up to you. the only part that I did not finish was the forward grip and the pipe connected to it.
http://www.4shared.com/file/8CTzpMYL/H4_Rocket_Launcher.html
http://www.4shared.com/file/8CTzpMYL/H4_Rocket_Launcher.html
my son been asking for max steel armour
anyone seen files for this
cardboard or foam files
Max Steel - Official Website - Mattel
http://www.maxsteel.com/en-us/home/
anyone seen files for this
cardboard or foam files
Max Steel - Official Website - Mattel
http://www.maxsteel.com/en-us/home/
Crimmson
Well-Known Member
thank you Blertz, Hari51 now has two choices. are you planning on cleaning up any other model by the way. that is funny I had mesh welded the handle but took it out since I felt it would be dumb to build it out of paper.
my son been asking for max steel armour
anyone seen files for this
cardboard or foam files
Max Steel - Official Website - Mattel
http://www.maxsteel.com/en-us/home/
sorry I haven't seen these files at all
Hari51 here you are, just look it over see if you find anything wrong with it. I edited a lot of the small folds, I mesh welded the main barrel to the lower receiver, but left the top separate. I mesh welded the top edited it for small folds as much as possible. the lid has been edited so that when built you can open and close it. I checked for fitment as much as possible. the rear is mesh welded in the starting in the middle leaving it as a floater but still attached. this shouldn't be all that bad as a build. I give it a 7 or 8 out of ten. especially since it still needs to be scaled to spec.
NOOB TUBE!!!!!!!!!!!!!!!!!!!!!!!!
done
checking for fitment
pep test open edges
pep test final, plus removal of handle. left reference point on the front of the receiver.
edit : sorry about that glitch on the down loads, I uploaded the wrong files. these are the correct files, the last set still had some things wrong. the correct files should have a four at the end not a three
not unfolded
obj link:
*snip*
pdo link:
*snip*
copy right Microsoft, 343
edit : delete links to messed up files
Crimmson
Well-Known Member
what good is a rocket launcher with out the..............
ROCKETS!!!!!!!!
probably the hardest mesh weld ever, I said ever future, past, present. on the scale of 1 to 1 million billion trillion..... 1 million billion trillion squared with a Chuck Norris round house kick thrown in there just in case
not unfolded
obj link:
http://www.mediafire.com/view/sxi5df9pam5e2ba/H4 ROCKET LAUNCHER ROCKET.obj
pdo link:
http://www.mediafire.com/download/coettn35nlqq7zx/H4 ROCKET LAUNCHER ROCKET.pdo
copy right Microsoft, 343
ROCKETS!!!!!!!!
probably the hardest mesh weld ever, I said ever future, past, present. on the scale of 1 to 1 million billion trillion..... 1 million billion trillion squared with a Chuck Norris round house kick thrown in there just in case
not unfolded
obj link:
http://www.mediafire.com/view/sxi5df9pam5e2ba/H4 ROCKET LAUNCHER ROCKET.obj
pdo link:
http://www.mediafire.com/download/coettn35nlqq7zx/H4 ROCKET LAUNCHER ROCKET.pdo
copy right Microsoft, 343
BlertZ
Active Member
I noticed that all the pocket on the center housing for the tubes has extra face over hang.
Crimmson
Well-Known Member
Hari and Blertz give me a minute, those are some of the things I had fixed already. I have tried saving it under a different name after fixing it. I have tried reloading blender user settings. I don't understand why I fix the problems and it still shows up. any one got a clue.
Crimmson
Well-Known Member
ok try these, if these aren't fixed I don't know what to do. short of reloading blender in my computer I don't understand why it would still be doing this. I fix the problems, export it under a different name, and the problems still show up. I look for them in pep with the angle degree setting set at 180 degrees to make it easier to find. any one got a clue.
obj link:
*snip*
pdo link:
*snip*
edit: delete links to messed up files
obj link:
*snip*
pdo link:
*snip*
edit: delete links to messed up files
- Member DIN
- S251
I use to autodesk maya and studio max in school usually these problems happened when there are multiple vertice around one area. sometimes you had to go in and either remove that point and replace it with another or try to make a brand new section. I am a little rusty with modeling so I could be wrong. Crimmson I am very impressed with your work though. Don't worry to much. All good things come in time.
Crimmson
Well-Known Member
I have remodeled those areas. I remove the faces and then reconfigure it, that's why I dont understand why this is happening
Crimmson
Well-Known Member
this is getting annoying. I am going to give myself...... shrubbery, NEET!!!!
ok try these
obj link:
http://www.mediafire.com/view/dvt1136g26cut93/H4 ROCKET LAUNCHER 6.obj
pdo link:
http://www.mediafire.com/download/8cdo800m8dyi14l/H4 ROCKET LAUNCHER 6.pdo
HaloGoddess
Well-Known Member
There are some cool looking files in here. 
I am still waiting to see a H4 binary rifle model. hehe
I am still waiting to see a H4 binary rifle model. hehe
- Member DIN
- S251
There are some cool looking files in here.
There is actually one in the 3D render section I think on the 2nd or 3rd page. Jeez crimmson everyone wants you to do stuff now.lol
Crimmson
Well-Known Member
There are some cool looking files in here.
I am not worthy.
that out of the way, I gave up on it and the light rifle, its about 50 to 70 different models ( I am using swag here by the way) each making up one model. I would have to heavily and I mean heavily edit those files to get them ready, just the small amount of head way I made on the binary has taken me over 3 weeks of and on, probably longer. wait a minute, its the light rifle I have given up on I have only split the binary up into main pieces only. I honestly don't know how long it would take for something this size and many models to mesh weld. I go back to work on Thursday after recouping from surgery.
I also see that you model as well. which program do you use, I can upload a raw untouched obj for it, so that you can look at it.
edit:
I am sorry Halogodess , I had the rifles confused. it is the binary that I gave up on not the light rifle
here is the obj untouched for the binary rifle https://www.mediafire.com/?23b24ueatwatxf0
- Status
