My first build - Halo 3 Master Chief

[I2aMpAnT]

Finally got the front of the helmet together!

 

[master_colt_117]

Finally got the front of the helmet together!View attachment 276182View attachment 276183

Looks amazing bro, I have no doubt with some dremeling and custom fitting, the branfuhr visor would fit and look truly epic! When you're done with the suit, would you consider printing for commission?

 

[I2aMpAnT]

Looks amazing bro, I have no doubt with some dremeling and custom fitting, the branfuhr visor would fit and look truly epic! When you're done with the suit, would you consider printing for commission?

**** that’s something I can actually do well is print. If you looks close I’m not good enough/patient enough to do the finesse sanding but I figure from any distance and with paint it’ll be impossible to tell.

But yeah I was actually thinking of getting the CR10S5 to be able to bang out full pieces already scaled to not have to worry about the gluing. Although I have found a method that works...

Wet the edges with the glue and then hold together. Put a real good layer on the inside and then spray with accelerant to harden it instantly. Then wipe the front clean and it should nearly flawless from the front.

But thanks man. Gonna try and get this painted and the LEDs soldered and wired tonight!

 

[I2aMpAnT]

Got some hand painting done and the lights temporarily set up. Waiting on UPS to deliver my heat shrink before I solder it up.

 

[I2aMpAnT]

Had my one of my boys take a quick end of night project wrap up pic. Damn those gloves look perfect!

 

[I2aMpAnT]

First time ever fabricating an LED setup or ever soldering before. I think it came out decent

 

[I2aMpAnT]

Attempted the dual layer visor today. Came out alright, still gotta file out some edges.

 

[I2aMpAnT]

Helmet is 3/4 done. Last 2 prints should be done by tomorrow night!

Next will be the BR with some black PLA+ from eSun that you guys have recommended.

 

[I2aMpAnT]

Helmet is just about done. Just going to fix a few paint details with a brush and seal the visor with putty. Also 3D printed the Magnum and started painting it. BR will be done by the end of the week!

 

[Sean Anwalt]

Looking snazzy. I'm loving the gloves. And the tactical red undersuit.

 

[PaiganBoi]

Helmet is just about done. Just going to fix a few paint details with a brush and seal the visor with putty. Also 3D printed the Magnum and started painting it. BR will be done by the end of the week!View attachment 276583View attachment 276584View attachment 276585View attachment 276586View attachment 276587View attachment 276588

Bobble Chief!

 

[I2aMpAnT]

Been playing with Armor Smith and modeled myself and all 3 of my boys and their armor color based upon their favorite colors!

Only thing I don't like about ArmorSmith is the insane amount of resources it uses and I only have a 1050

 

[RandomRanger]

Been playing with Armor Smith and modeled myself and all 3 of my boys!

Only thing I don't like about ArmorSmith is the insane amount of resources it uses and I only have a 1050

My brother runs armorsmith on a 1050 with some issues as well, but I've ran it on both the 1070ti and intel integrated graphics without any stuttering, so I'm not 100% sure what's going on.

 

[TurboCharizard]

Checking in with a GeForce GTX 760 and a i7-4790K, I've only ever had issues when trying to attach multiple stl files that are 35MB and up. If your models are non-manifold it also causes issues but that's another issue.

 

[I2aMpAnT]

2 stitches from the exacto knife while working on this beauty! I’m gonna say well worth it. 1Day15hrs left for the 2 receiver parts and magazine!

 

[Sean Anwalt]

Holy smackerel!! Be careful using the x-acto knife, man!

That print is looking sick! Looking forward to seeing it up and running!

And try not to cut yourself anymore!

 

[ShanieGirl]

It looks amazing

 

[I2aMpAnT]

Had a print fail miserably with the rest of the BR parts so I was a bit behind. But it’s reprinting and the 2 grenades are almost done as well. Damn the Grenades are big! Even at .72 Of their full size, they’re still massive.

 

[RandomRanger]

Had a print fail miserably with the rest of the BR parts so I was a bit behind. But it’s reprinting and the 2 grenades are almost done as well. Damn the Grenades are big! Even at .72 Of their full size, they’re still massive. View attachment 276851View attachment 276852View attachment 276853View attachment 276854View attachment 276855

The thumbnail of those grenades looks like a bra

 

[I2aMpAnT]

The thumbnail of those grenades looks like a bra

Click bait! Lol